• Journal of Periodontal and Implant Science
• /
• v.25 no.2
• /
• pp.192-209
• /
• 1995

The purpose of this study was to evaluate drug-loaded biodegradable membranes for guided tissue regeneration(GTR). The membranes were made by coating mesh of polyglycolic acid(PGA) with polylactic acid(PLA) containing 10% flurbiprofen or tetracycline. The thickness of membrane was $150{\pm}30{\mu}m$, and the pore size of surface was about $8{\mu}m$ in diameter. The release of drugs from the membrane was measured in vitro. Cytotoxity test for the membrane was performed by gingival fibroblast cell culture, and the tissue response was observed after implant of membrane into the dorsal skin of the rat for 8 wks. Ability to guided tissue regeneration of membranes were tested by measuring new bone in the calvarial defects(5mm in diameter) of the rat for 5 weeks. The amount of flurbiprofen and tetracycline released from membrane were about 30-60% during 7 days. Minimal cytotoxity was observed in the membrane except 20% drug containing membrane. In histologic finding of rat dorsal skin, many inflammatory cells were observed around e-PTFE, polyglactin 910 and PLAPGA membrane after 1 or 2 weeks. PLA-PGA membrane was perforated by connective tissue after 4 or 6 weeks, and divided as a segment at 8 weeks. In bone regeneration guiding potential test, tetracycline loaded membrane was most effective (p

• Journal of Korean Society of Forest Science
• /
• v.99 no.1
• /
• pp.52-56
• /
• 2010

Crown fuel characteristics such as crown bulk density, crown base height, and fuel moisture content of Japanese red pine were analyzed. Ten trees in Mt. Palgong at Daegu, were destructively sampled and their crown fuels were weighed separately for each fuel category. Fuel content of live and dead crown component were 53%, and 15.3%, respectively. Foliar moisture content was 56%. Needles and twigs with diameter less than 1cm diameter accounted for 16.2%, 55% of total and crown fuel load. Average crown bulk density of Japanese red pine was 0.24 kg/$m^3$, effective crown fuel bulk density was 0.1325 kg/$m^3$.

• Journal of the Korean Society of Visualization
• /
• v.15 no.1
• /
• pp.47-52
• /
• 2017

In droplet-based microfluidic systems, in-droplet preconcentration of a sample is one of the important prerequisites for biochemical or medical analysis. There have been a few studies on preconcentration in a moving droplet, but they are limited to practical applications since 1) their method are time-consuming or 2) they require specific properties such as electric and magnetic properties. In this study, we demonstrated the position control of polystyrene particles of 5 and $10{\mu}m$ in diameter inside a moving water-in-oil droplet using traveling surface acoustic waves. Since the frequencies for effective control of each diameter were found, microparticles with no labels could be utilized. In addition, the proposed method enabled on-demand preconcentration inside a polydimethylsiloxane microchannel. In-droplet preconcentration of microparticles was realized by splitting a mother droplet with manipulated particles at a downstream bifurcation zone. Given these advantages, the proposed system is a promising acoustofluidic lab-on-a-chip platform for preconcentration inside a droplet.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.1
• /
• pp.147-154
• /
• 2002

The dynamic load caused by sloshing of internal fluid severely affects the structural and control stabilities of cylindrical liquid containers accelerating vertically. If the sloshing frequency of fluid is near the frequency of control system or the tank structure, large dynamic force and moment act on launching vehicles. For the suppression of such dynamic effects, generally flexible ring-type baffles are employed. In this paper, we perform the numerical analysis to evaluate the dynamic suppression effects of baffle. The parametric analysis is performed with respect to the baffle inner-hole diameter and two different baffle spacing types : equal spacing with respect to the tank and one with respect to the fluid height. The ALE (arbitrary Lagrangin-Eulerian) numerical method is adopted for the accurate and effective simulation of the hydrodynamic interaction between fluid and elastic structure.

• Korean Journal of Plant Resources
• /
• v.18 no.3
• /
• pp.367-373
• /
• 2005

The purposes of this dissertation were to examine relativity between growth characteristics factors and develop the model of growth characteristics. In the result of statistical summaries of the factors in growth characteristic, the highest level of correlation was in plant height, plant width, petiole and chlorophyll in the case of Artemisia iwayomogi; leaf length, in the case of A. stolonifera;, leaf width, of A. princeps var. orientalis;, diameter, of A. feddei;, leaf thickness, of A. iwayomogi, A. princeps var. orientalis, A. montana, A. stolonifera, A. sylnatica; leaf length and leaf width of the other species. In the case of correlation analysis, leaf width and diameter were most correlative in A. capillaris;, plant height and plant width, in A. montana; plant height and leaf width, in A. stolonifera; leaf length and leaf width, in other species. The results of model analysis of growth characteristics were as follows. A. capillaris proved to be about $79.4\%$ effective ; A. princeps var. orientalis, about $91.7\%$ ; A. montana, about $70.3\%$ ; A. iwayomogi, about $49.0\%$ ; A. stolonifera, about $72.5\%$; A. sylnatica, about $75.0\%$;, A. feddei about $60.4\%$ ; A. rubripes about $54.0\%$.

• Archives of Reconstructive Microsurgery
• /
• v.23 no.2
• /
• pp.97-100
• /
• 2014

The number of patients with chronic renal failure who require renal replacement therapy is increasing and dialysis is still the mainly used renal replacement therapy. The first choice of surgical technique currently used is side-to-end anastomosis of the radial artery and the cephalic vein. The authors report on a case of an effective arteriovenous shunt operation performed using microscopy. A 53-year-old male with chronic renal failure was referred to plastic and reconstructive surgery department to undergo an arteriovenous shunt operation. Venography was performed before surgery in order to find the appropriate vessel for the arteriovenous shunt operation. The cephalic vein on the wrist showed a diameter of over 4 mm, which was appropriate for an arteriovenous shunt operation. Anastomosis of the vessels was performed under microscopy using Nylon #9-0. Blood flow and vessel diameter were evaluated by venography after surgery and showed well maintained function of the shunt. Complications such as bleeding, edema of the upper arm, and wound dehiscence did not occur. Many factors and certain complications may affect the long-term patency of an arteriovenous shunt; however, exquisite surgical technique is the most important factor in a successful operation. Thus, arteriovenous shunt operation using microscopy is thought to be a good treatment option.

• The Korean Journal of Food And Nutrition
• /
• v.31 no.4
• /
• pp.511-519
• /
• 2018

The baking properties of rice bread with different percentages of butter and oil in wet and dry rice flour were investigated. The moisture, damaged starch, mean diameter, pasting properties by amylogram and RVA (Rapid Visco Analyzer), as well as thermal properties by DSC (Differential Scanning Calorimetry) of wet and dry rice flour were analyzed. The specific gravity and color (L, a, b) of the dough, as well as the appearance, color (L, a, b) and texture of the rice bread with different percentages of butter and oil in wet and dry rice flour were also analyzed. As a result, the wet rice flour were composed of a noted higher content in moisture, compared to the dry rice flour (p<0.001). The wet rice flour had lower values of damaged starch, higher values of mean diameter and a higher peak viscosity than was noted in the dry rice flour (p<0.001). The wet rice flour showed a higher degree of hydration and gelatinization than was seen in the dry rice flour (p<0.001). The prevailing principle to utilize the replacement of wet rice flour with oil had a significant effect on the volume, specific volume and hardness of the rice bread (p<0.001). The hardness of the rice bread also showed a decreasing trend as the amount of the added oil was increased into the mixture. These results suggest that the replacement of wet rice flour with 5.8% oil is effective for the production of rice bread.

• Journal of Hydrogen and New Energy
• /
• v.26 no.4
• /
• pp.301-307
• /
• 2015

We present a study of hydrogen liquefaction using the CFD (Computational Fluid Dynamics) program. Liquid hydrogen has been evaluated as the best storage method because of high energy per unit mass than gas hydrogen, but efficient hydrogen liquefaction and storage are needed in order to apply actual industrial. In this study, we use the CFD program that apply navier-stokes equation. A hydrogen is cooled by heat transfer with the while passing gas hydrogen through Cu tube. We change diameter and flow rate and observe a change of the temperature and flow rate of gas hydrogen passing through Cu tube. As a result of, less flow rate and larger diameter are confirmed that liquefaction is more well. Ultimately, When we simulate the hydrogen liquefaction by using CFD program, and find optimum results, it is expected to contribute to the more effective and economical aspects such as time and cost.

• Particle and aerosol research
• /
• v.15 no.4
• /
• pp.139-148
• /
• 2019

This study was performed for the application of a high-speed centrifugal cyclone to shale gas mining process. This device uses the centrifugal force to control particles similar to typical cyclones, and the disk located inside the cyclone is forced to rotate using a motor. The pressure difference occurred during the rotating of disk. Hence, inflow rate was generated without a blower fan. In addition, flow rate increased with elevating rpm of motor. The installing the disk in multiple stages on the inner rotor increased the instantaneous disk outlet flow. Hence, the control efficiency of oil particle increased from 1.05% to 31.2%. By modifying the structure of the disk so that the air flow to the opposite direction of the cyclone, the control efficiency of oil particles increased to 81.5%. By increasing the capacity of the motor and the size of the disk, the flow rate was increased to 2.5 ㎥/min because the rpm of motor and pressure difference increased. As rpm of motor increased, the cut-off diameter (d_pc) became smaller. Unlike the Lapple's equation, d_pc was inversely proportional to the effective number of rotations (N_e). The control efficiency was maintained even if the concentration of oil particles increased, for this reason, the higher the oil concentration, the more particles were accumulated and controlled.

• Journal of Wetlands Research
• /
• v.22 no.2
• /
• pp.121-129
• /
• 2020

This paper described a laboratory investigation of micro hydropower at lower head water in a free vortex flow. The vortex height, turbine rotation and torque for straight blade with inner curved edge, twisted blade and curved blade were investigated at the flow rate of 0.0069 ㎥/s in the inlet channel. The results showed that the optimum vortex strength occurred within the range of the diameter of basin to the outlet diameter ratios of 0.17~18.5. The power output and efficiency of straight blade were higher as compared to other blades. The highest amount of generated energy was 12.33 W, the torque was 0.91 N·m and the highest efficiency by considering effective head was 29.5 %, whereas the highest efficiency by considering vortex height was 80.5 % at the rotational speed of 132 rpm. The water vortex velocity of straight blade was about 2.8 times larger than the mean velocity in the inlet channel.