• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1787-1790
• /
• 2005

We have developed satellite devices for fine attitude control of the Science & Technology Satellite-2 (STSAT-2) scheduled to be launched in 2007. The analog sun sensors which have been continuously developed since the 1990s are not adequate for satellites which require fine attitude control system. From the mission requirements of STSAT-2, a compact, fast and fine digital sensor was proposed. The test of the fine attitude determination for the pitch and roll axis, though the main mission of STSAT-2, will be performed by the newly developed FDSS. The FDSS use a CMOS image sensor and has an accuracy of less than 0.01degrees, an update rate of 20Hz and a weight of less than 800g. A pinhole-type aperture is substituted for the optical lens to minimize the weight while maintaining sensor accuracy by a rigorous centroid algorithm. The target process speed is obtained by utilizing the Field Programmable Gate Array (FPGA) in acquiring images from the CMOS sensor, and storing and processing the data. This paper also describes the analysis of the optical performance for the proper aperture selection and the most effective centroid algorithm.

• Korean Journal of Optics and Photonics
• /
• v.10 no.1
• /
• pp.10-14
• /
• 1999

One dimensional inhomogeneous phase modulation effects on the MTF of optical system was investigated. The lens under test was a doublet made in Korea. It was 36 mm effective diameter, 128.04 mm effective focal length. The ray-fans and spot diagrams were calculated and presented on the picture for on-axis and off-axis (field of view, $1^{\circ}$ and $2^{\circ}$). Phase modulation was carried out by positioning a phase modulator close contacted with the lens under test. One was linear type that had linearly increasing phase retardation and the other was stepped type which had phase difference $\pi$ for each step. The MTFs were measured on the Gaussian image plane and were compared with one another. The MTFs of linear type phase modulated apertures had a little lower values than the MTF of unmodulated aperture for on-axis but most of all the MTFs of one dimensional phase modulated aperture are improved than the MTF of unmodulated aperture.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.10 s.89
• /
• pp.944-951
• /
• 2004

In this paper, we proposed the method of the characteristic impedance and effective dielectric constant calculations of the shielded microstrip line with ground aperture using conformal mapping method. This method has advantages that can calculate the transmission parameters without using any other numerical method because present the closed form equations. First of all, we supposed the signal propagate with the microstrip mode(Quasi-TEM) and calculated the capacitance divide by three sections and calculated the characteristic impedance and effective dielectric constant using calculated capacitances. From the HFSS simulation result, calculated result was very similar to the simulation result within the five percent error range.

• Journal of the Korean Solar Energy Society
• /
• v.27 no.4
• /
• pp.113-120
• /
• 2007

The 5kWt dish solar collector is designed and the preliminary performance test for this is carried out. The diameter of the parabolic dish is 3.2 m, and its focal length is 2 m. It consists of 10 small reflectors which have their own curvatures, and the effective reflecting area is $5.9\;m^2$, and the rim angle of the dish is $43.85^{\circ}$. The reflectivity of reflectors is 0.95, and the thermal capacity of the system is about 5 kW thermal. The aperture diameter of the cylindrical-shape receiver which is made of stainless steel is 100 mm, and the height is 210 mm. A quartz window is installed at the receiver aperture to minimize the convective heat loss and prevent air leakage. In order to increase the heat transfer area, porous materials (nickel-alloy) are inserted into the receiver. Air flows into the upper part of the receiver which is the opposite side of the aperture. After the air flows through the inside of the receiver, that goes out of the receiver through 3 exits which are located near the aperture. The volumetric flow rates of air are varied from 600 to 1200 L/min. The results show that the system efficiency and receiver efficiency increase as the volume flow rate increases.

• Transactions of Materials Processing
• /
• v.4 no.1
• /
• pp.79-91
• /
• 1995

Precision forming of electronic components has appeared to be competitive according to manufacturing cost and dimensional tolerances. Now domestic electronic companies have been involving in utilization of the finite element method in process design of precision forming. A forming process to produce an electronic component, aperture, has been inbestigated to find out forming defects during multi-operations. The applications of the commercial FEM software MARC show a possibility of defect in precision coining process among the whole multi-process. Thus the coining process of three-dimensional deformation is analyzed using DAMF-3D which has been developed in this lab with the rigid-plastic algorithm. The result f simulations by DAMF-3D provides clear description of the defect involved in the coining process.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2001.04a
• /
• pp.73-76
• /
• 2001

We have simulated the effect of fracture characteristics on reduction of effective permeability of the fractured rocks due to in-situ bacteria growth. A nutrient is injected continuously for growth of in-situ bacteria. We used a power law for fracture length distribution and a fBm for fracture aperture spatial distribution. The results show that in-situ bacteria growth reduces the Permeability hyperbolically, but the porosity of backbone fracture does not change significantly. It shows that reduction of the permeability proceeds at faster speed for smaller value of length exponent(a) and for larger value of Hurst exponent(H). The fracture length distribution has stronger effect on speed of reduction than the aperture spatial distribution. The time needed to reduce permeability is inversely proportional to the hydraulic gradient.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.9
• /
• pp.173-179
• /
• 2003

In optical storage device system, there are several research topics to increase its recording density. The main idea is reducing wave length of laser diode and magnifying the number of numerical aperture (NA). In conventional optical system NA cannot be over the unity in the air because of its diffraction limit. But it is possible to overcome its limitation of unity in near field using Solid Immersion Lens. In this work, the mathematical Solid Immersion Lens (SIL) design process was illustrated by using near field theory. Also, numerical SIL design parameters were calculated by means of CODE V. Through the work, we propose the new type of SIL for high density optical recording systems.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.1
• /
• pp.40-47
• /
• 2003

This study was conducted to determine the sound paths and transmitted sound level in house. An air-conditioner system was selected a typical sound source. The measured transmission loss data shows that the apertures have an significant effect on the transmitted noise and comparable with the existing theoretical data. Therefore the complex aperture was substitute to quantitative apertures approximately. An effective simulation method, ray tracing and mirror image source method, was employed in the prediction of transmitted sound level. The measured results were efficiently reflected on the simulated results. So it is important that measuring the acoustic parameter prior to the prediction of the transmitted sound level in the house.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.21 no.5
• /
• pp.27-32
• /
• 1984

In SAW filters with a small aperture, diffraction effect is not negligible and degrades the frequency response near the trap. A computer simulation program for diffraction analysis is developed, and an effective diffraction compensation method is proposed to compensate the diffraction effect. A TV-lF SAW filter was designed with the diffraction taken account by the proposed method, which satisfies given frequency specifications.

• Journal of Environmental Science International
• /
• v.4 no.4
• /
• pp.15-15
• /
• 1995

ABA and SA showed different effect on stomatal closing on same condition. The addition of 1 M salicylic acid to fully opened stomata resulted in a significant reductionn of 22 % in stomatal aperture. However, 1 mM ABA reduced 73 % of stomatal aperture. The light absorption spectra of the salicylic acid solution showed that SA was degraded within 1 hour. Therefore, SA solution was resupplied % the detached epidermis every 30 min. during incubation and it was found that even at 10 $mu$M SA induced stomatal closing significantly. Its effect was also greatly pH dependent. The reduction of stomatal aperture caused by 1 mM SA was most effective at lower pH (pH 7.2, 5 %: pH 6.2, 40 %; pH 5.2, 78 %). Therefore, if SA was properly treated to the epidermal strips in the medium, the effects of SA on stomatal closing were similar with those of ABA.