• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.4
• /
• pp.405-415
• /
• 2019

Excessive tooth wear can cause irreversible damage to the occlusal surface and can alter the anterior occlusal relationship by destroying the structure of the anterior teeth needed for esthetics and proper anterior guidance. The anterior deep bite is not a morbid occlusion by itself, but it may cause problems such as soft tissue trauma, opposing tooth eruption, tooth wear, and occlusal trauma if there are no stable occlusal contacts between the lower incisal edge against its upper lingual surface. The most important goal of treatment is to form stable occlusal contact in centric relation. In this case report, patients with decrease in vertical dimension and anterior deep bite due to maxillary posterior tooth loss and excessive tooth wear were treated full mouth rehabilitation with increased vertical dimension to regain the space for restoration and improve anterior occlusal relationship and esthetics. The functional and aesthetic problems of the patient could be solved by the equal intensity contact of all the teeth in centic relation (CR), anterior guidance in harmony with the functional movement, and restoration of the wear surface beyond the enamel range.

• Journal of Broadcast Engineering
• /
• v.25 no.6
• /
• pp.973-979
• /
• 2020

This study aims to objectively and quantitatively determine the social emotion of empathy by collecting pupillary response. 52 subjects (26 men and 26 women) voluntarily participated in the experiment. After the measurement of the reference of 30 seconds, the experiment was divided into the task of imitation and spontaneously self-expression. The two subjects were interacted through facial expressions, and the pupil images were recorded. The pupil data was processed through binarization and circular edge detection algorithm, and outlier detection and removal technique was used to reject eye-blinking. The pupil size according to the empathy was confirmed for statistical significance with test of normality and independent sample t-test. Statistical analysis results, the pupil size was significantly different between empathy (M ± SD = 0.050 ± 1.817)) and non-empathy (M ± SD = 1.659 ± 1.514) condition (t(92) = -4.629, p = 0.000). The rule of empathy according to the pupil size was defined through discriminant analysis, and the rule was verified (Estimation accuracy: 75%) new 12 subjects (6 men and 6 women, mean age ± SD = 22.84 ± 1.57 years). The method proposed in this study is non-contact camera technology and is expected to be utilized in various virtual reality with smart glasses.

• Tribology and Lubricants
• /
• v.32 no.2
• /
• pp.61-66
• /
• 2016

Total thickness variation (TTV), BOW, and surface roughness are essential characteristics for high quality sapphire substrates. Many researchers have attempted to increase removal rate by controlling the key process parameters like pressure and velocity owing to the high cost of consumables in sapphire chemical mechanical polishing (CMP). In case of the pressure approach, increased pressure owing to higher deviation of pressure over the wafer leads to significant degradation of the TTV. In this study, the authors focused on reducing TTV under the high-pressure conditions. When the production equipment polishes multiple wafers attached on a carrier, higher loads seem to be concentrated around the leading edge of the head; this occurs because of frictional force generated by the combination of table rotation and the height of the gimbal of the polishing head. We believe the skewed pressure distribution during polishing to be the main reason of within-wafer non-uniformity (WIWNU). The insertion of a hub ring between the polishing head and substrate carrier helped reduce the pressure deviation. Adjusting the location of the hub ring enables tuning of the pressure distribution. The results indicated that the position of the hub ring strongly affected the removal profile, which confirmed that the position of the hub ring changes the pressure distribution. Furthermore, we analyzed the deformation of the head via finite element method (FEM) to verify the pressure non-uniformity over the contact area Based on experiment and FEM results, we determined the optimal position of hub ring for achieving uniform polishing of the substrate.

• Journal of Advanced Navigation Technology
• /
• v.15 no.5
• /
• pp.808-822
• /
• 2011

In the subject experiment of this paper, contrary to the existing thesis about the emotional labor of people in the face-to-face service industry, I have chosen call center agents as they are primary first point of contact with customers in the airline industry. The main purpose of this experiment is to understand the relationship in between workplace burnout and emotional labor. In this study, I have investigated the following concepts; the effect of mediation on emotional labor, the different levels of emotional labor, and recommendations for improvement of competitive power to the call center agent as a member of the organization. The main results of experiment are as follows. First, the emotional labor given by the airline call center agents affects the rate of burnout. Second, support from workplace superiors showed that mediation had an effect on the relationship between emotional labor and burnout, however support from co-workers had no effect whatsoever. It is hope that this paper would supply information to give a competitive edge for airline call centers and their agents.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.2
• /
• pp.267-275
• /
• 2012

In this study, normal wind load and blast wind load are modeled mathematical. And the periodical torque and bending moments transmitted to the main shaft of wind turbine are investigated. A normal wind model assumed, of which the wind velocity is increased according to the height from ground. The average values and the harmonic terms of the transmitted moments are studied on the wind direction of range $-45^{\circ}{\sim}45^{\circ}$ and the bending moment characteristics are examined, which is regarded as the main source of the misalignment of gear train. In normal wind load case, excitation frequency is 3X (X : Rotor speed). When the wind direction is $+22.5^{\circ}$, the horizontal axis of bending moment occur the 50% of main torque. This result leads to edge contact of gear teeth by shaft elastic deformation. In blast wind load case, excitation frequency are 3X,6X,9X. Additional, in the (+) direction of wind load, relative harmonic percentage is increase.

• Journal of Ecology and Environment
• /
• v.38 no.1
• /
• pp.57-65
• /
• 2015

A natural mixed stand of Phragmites australis and Phacelurus latifolius was studied to clarify the distribution properties in a microsite in a tidal flat of Suncheon Bay. The height, density, and biomass of the shoots, as well as the biomass of the root system, were monitored for both species along with the altitude on a mound from June 2010 to October 2013. Firstly, the mean height and dry weight of both species were similar during the growth season. However, individual variations of the sizes of plants in the same species were noticeable. Secondly, the density and dry weight per unit area of P. latifolius increased, but that of P. australis decreased with the altitude on the mound. Thirdly, the root system (rhizomes and roots) of P. latifolius was mostly located in the upper layer (up to 20 cm depth), while that of P. australis was in the lower layer (over 70 cm depth) of the sediment. The roots of P. australis penetrated to the lower parts of the water table, while the roots of P. latifolius did not make contact with free water of the sediment. Fourthly, the removal of the shoot in the early growth season led to a visible reduction of biomass in the late growth season. The reduction rate was larger in P. latifolius than in P. australis. Lastly, in the area where the mound was removed, the density of P. australis increased in the first two years (2010-2011) and was highly sustained inthe last two years (2012-2013). However, the density of P. latifolius was low, and this plant was distributed at the edge of the mound only.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.4
• /
• pp.10-16
• /
• 2007

A rubber seal for wheel bearing which has been mainly applied to car wheel supporting device is required to have both high sealing performance and drag torque. Because of severe operational conditions like infiltration of mud or splashed water, the importance of rubber seal which is aimed for leakage prevention of grease and effective blocking of foreign substances has been increasing continuously. The sealing performance of this seal depends on several factors such as materials of seal, friction conditions of contact regions and geometry of seals and so on. We have focused on the effects of geometric characteristics such as the angle of main lip, interference between lip edge and inner metallic ring. In this study, the optimization of geometric variables was performed using the finite element analysis. For the sake of finite element analysis, uniaxial tensile tests were conducted and several constants for Mooney-Rivlin's equation were obtained. According to the results of this study, mock-up bearing was made. To verify this study, drag torque and mud spray test were preformed.

• Transactions of the Society of Information Storage Systems
• /
• v.5 no.1
• /
• pp.47-52
• /
• 2009

Most hard disk drives that apply the ramp load/unload technology unload the heads at the outer edge of the disk while the disk is rotating. The load/unload includes the benefits as like an increased areal density, a reduced power consumption and an improved shock resistance. A lot of papers investigating the effects of the various load/unload parameters such as a suspension tab, a limiter, a ramp and air-bearing surface designs have been published. However, in previous researches, an effect of the suspension is not considered at each load/unload step. In this paper, we focus that a variation of the state matrix affects the load/unload performance on based on a state matrix that is a stiffness matrix of the suspension. Because the state matrix is related to the suspension at each load/unload step, to change the state matrix means the structural change of the suspension. Therefore, we investigated a range of a pitch static attitude(PSA) and a roll static attitude(RSA) for load/unload performance. We also analyzed an effect of the variation of the state matrix a range of load/unload velocity occurred a slider-disk contact. We determined the variation of the state matrix to improve the load/unload performance through comparison of each factor of state matrix.

• Korean Journal of Optics and Photonics
• /
• v.9 no.6
• /
• pp.368-372
• /
• 1998

A 16-views 3 dimensional imaging system is designed by spatially combinding two 8-views time multiplexed image channels. Each 8-views channel composed of 3 primary color CRTs and a dichroic beam splitter which combining the three CRTs as one channel. Each CRT displays 8-view images time sequentially. These images are projected to a holographic screen of a size 1$\times$0.8 $m^2$ through a projection optics. Characteristics of the three different configurations of projection optics are examined with the optics designing program "DEMOS" to select an optimized projection optics for the system. The configulation of the optimized projection optics is found like following; images from each channel combined by two-fold mirror are projected by a projection objective through a 16-strips LCD shutter. In this configuration, the shutter should be located at the entrance pupil of the objective, and the folded edge of the two-fold mirror should contact symmetrically to the center line of the shutter.e shutter.

• Journal of the Ergonomics Society of Korea
• /
• v.28 no.1
• /
• pp.9-19
• /
• 2009

Repetitive movement, inadequate working posture, overuse of force, physical contact with sharp edge, vibration and temperature were well known risk factors of WMSDs (Work-related Musculoskeletal Disorders). Many researchers have investigated the relationship between inadequate working postures and incidences of WMSDs of the upper extremities, whereas relatively few researchers have tried to evaluate workload associated with the lower-body postures. The effects of lower-limb postures including various knee flexion angles on the subjective discomfort, heart rate and EMG of lower-limb muscles were investigated in this study. Thirty graduate students were asked to maintain thirteen different body postures, and heart rate and EMG data of five muscle groups (electro spine, biceps femoris, vastus medialis, gastrocnemius and tibialis anterior) from each posture were collected during fifteen minutes sustaining tasks. All participants were also asked to report their discomfort ratings of body parts. Results showed that high subjective discomfort ratings and heart rates were reported at the postures of knee angles of $60^{\circ}$ and $90^{\circ}$, whereas low discomfort ratings were founded at the postures of chair heights with 20cm, 40cm, and sitting with crossed legged. The change of median frequency for each muscle group during fifteen minutes tasks was investigated for each body posture to evaluate the relationship between muscle fatigue and body posture. It was found that the trends of changes of median frequency were different based on muscle group as well as lower-limb body posture from this study.