• Corrosion Science and Technology
• /
• v.13 no.3
• /
• pp.112-119
• /
• 2014

In this work, it is aimed to develop the fabrication method of axial stress corrosion cracking (SCC) defects having various sizes, on the outer diameter surface of the steam generator (SG) tubings. To control the length of the artificial SCC defect, the specific area of the SG tubing samples was exposed to an acidic solution after a sensitization heat treatment. During the exposure to an acidic solution, a direct current potential drop (DCPD) method was adopted to monitor the crack depth. The size of the SCC defect was first evaluated by an eddy current test (ECT), and then confirmed by a destructive examination. From the comparison, it was found that the actual crack length was well controlled to be similar to the length of the surface exposed to an acidic solution (5, 10, 20 or 30 mm in this work) with small standard deviation. From in-situ monitoring of the crack depth using the DCPD method, it was possible to distinguish a non-through wall crack from a through wall crack, even though the depth of the non-through wall crack was not able to be precisely controlled. The fabrication method established in this work was useful to simulate the SCC defect having similar size and ECT signals as compared to the field cracks in the SG tubings of the operating Korean PWRs.

• The Journal of Information Systems
• /
• v.17 no.3
• /
• pp.175-204
• /
• 2008

Ubiquitous computing is enhancing computer use by making many computers available throughout the physical environment without being noticed to the users. To facilitate successful adoption and diffusion of ubiquitous systems, it is important to find out the factors affecting their uses. Although researches related to ubiquitous computing have been vigorously conducted from the aspect of system and service provider, there have been very few studies that focus on the user's perspective. This study attempts to find out major factors which are dedicated to the development of ubiquitous systems and services and the relationships between these factors and user satisfaction factors. This study derived the specific factors that characterize ubiquitous services, such as ubiquity, contextual offer, user affinity, privacy, reliability, responsiveness, assurance, and empathy. We also considered service quality factors of ubiquitous services. Then these factors were combined with the Expectation Confirmation Theory (ECT) model and the path analysis was applied to find out the factors affecting user satisfaction and the intention to use the systems. The research findings indicate that ubiquity, contextual offer, privacy, reliability, and responsiveness affect the perceived usefulness. The perceived ease of use and confirmation were found to affect the perceived usefulness. The perceived usefulness, perceived ease of use, and confirmation fumed out to influence the satisfaction. It turned out that the result of this study on the relationship between the perceived usefulness and user satisfaction was identical with the findings in previous related ECT researches. We think this study makes two significant contributions to the development of ubiquitous services. First, this study provides basic implications for better ubiquitous services by considering important characteristics of ubiquitous systems as services. Second, this study also suggests important factors that need to be considered when ubiquitous service providers develop new ubiquitous services to improve user satisfaction and the intention to use the services.

• Nuclear Engineering and Technology
• /
• v.54 no.9
• /
• pp.3272-3282
• /
• 2022

To improve the safety and life extension qualities of nuclear fuel rods which is currently made of zirconium (Zr) alloy, research on the application of chromium (Cr) coating was conducted. Cr coating has advantages such as increased corrosion resistance and reduced oxidation rate, but non-destructive thickness evaluation studies are needed to ensure the reliability of the steps taken to provide uniform coating thickness. Eddy current testing (ECT) is a representative non-destructive technique for such as thickness evaluation and surface defect inspection. To inspect changes in thickness at micron scale, the Swept Frequency Eddy Current Testing (SFECT) method was applied to select a frequency range sensitive to changes in thickness. The coating thickness was evaluated using changes in signals, such as that for impedance. In this study, basic research was performed to evaluate the thickness of the Cr coating on a rod using an encircling sensor and the SFECT technique. The sensor design parameters were determined through simulation, after which the new sensor was manufactured. A sensor capable of measuring the thickness of a non-uniformly Cr-coating rod was selected through an experiment evaluating the performance of the manufactured sensor. This was done using the impedance-difference of a Cr-coating rod and a Zr alloy rod. The possibility of evaluation of the Cr coating thickness was confirmed by comparing the experimental results with the selected sensor and the signals of the measured Cr-coating rod. All simulation results were verified experimentally.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.3027-3032
• /
• 2007

To understand the complex phenomena performed in steam explosion, the fast and global measurement of the steam distribution is imperative for this extremely rapid transient stimulation of the bubble breakup and coalescence due to turbulent eddies and shock waves. TROI, the experimental facility requests more robust sensor system to meet this requirement. In Europe, researchers are prefer a X-ray method but this method is very expensive and has limited measurement range. There is an alternative technology such as ECT. Because of TROI's geometry, however, we need axial tomography method. This paper reviews image reconstruction algorethms for axial tomography, including Tikhonov regularization and iterative Tikhonov regularization. Axial tomography method is examined by simulation and experiment for typical permittivity distributions. Future works in axial tomography technology is discussed.

• The Journal of Information Systems
• /
• v.22 no.1
• /
• pp.165-180
• /
• 2013

Using long-term panel data of OKCashbag, this study analyzes whether learning effect influencing in effectiveness of coalition loyalty program exists. We found that there is learning effect in the behavior of loyalty program customers, and discovered that learning effect appears more greatly in using (redeeming) behavior than accumulating behavior. The authors also found a long-lasting structural changes in the pattern of point redemption after a major marketing activities associated with the act of using points. The results of this research can contribute to suggest direction to the future researches to examine differences of learning effect according to demographic (gender, age, region, ect.) and transactional (frequency or scale in point accumulation and redemption etc.) characteristics.

• Journal of Haehwa Medicine
• /
• v.15 no.1
• /
• pp.111-115
• /
• 2006

Tension headache is one of the most common form of headache. It may occur at any age, but is most common in adult and adolescents. One cause of this muscle contraction is a response to stress that induces changes and imbalance on autonomic nerve system. To cure tension headache, getting rid of psychological stress and anxiety have to do first. In this case, we described a 42 years old woman who diagnosed as tension headache. She complained headache with scruff pain, dyspepsia, nausea and coldness of toes. through oriental medical treatment(for example, acupuncture, herbal medicine ect.), her condition was improved.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2007.11a
• /
• pp.205-210
• /
• 2007

This study on the prevention of electric fire. Generally the electric fire is caused by break or disconnection of the power line, short circuit and poor contact, arcing fault ect. In these causes, this paper is studied on the detection of poor contact and arcing fault. The arcing fault is caused by poor contact mainly. The arcing fault can occurs a electric fire by interaction of flammable gas and materials and it can be caused of tracking and carbonization. These phenomenons is also caused of electric fire. Therefore this paper is studied on the detection of arcing fault and poor contact.

• Journal of the Korean Society of Visualization
• /
• v.8 no.3
• /
• pp.12-21
• /
• 2010

Swirling flows are found in very wide range of applications, for examples, cyclone separators, spraying machines, heat exchangers and jet pumps, ect. Relatively, little work has been done on the swirl flow using flow visualization techniques. This study deals with many visualization techniques to study on swirling flow. These techniques are related to oil films methods, smoke, dye liquids, liquid crystal, stroboscope light, smoke wire, white light, naphthalene sublimation, LDV(lase doppler Velocimetry) and PIV(particle image velocimetry). The present work has handled single, annular, carved tube, swirl expansion and swirl wake using several visualization methods in the vertical and horizontal circular tube.

• The Korean Journal of Ecology
• /
• v.14 no.3
• /
• pp.345-360
• /
• 1991

Benthic macroinvertebrates were collecte in the middle reaches of the paenae stream, a tributary of th naktong river in korea, in four seasons from August 1989. To may 1990, during the study period, 125 species, 81 genera and 41 families were collected. Overall, the most dominant species was lepidostoma sp. 1 followed by heptagenia kihada, neoperla quadrata, diamesa sp. 1, ect.. the community was most diverse in autumn, However the number of collectd individuals was highest in winter. Species of chironomids including diamesa sp. 1 and mayflies including paraleptophlebia chocorata were collected exceptionally in a large number in winter. Seasonal occurrence of funtional groups such as collectors, shredders and scrapers was related with the availadlity of food sourses in the stream. The abundance of predators was relatively stable in four seasons with 17% on average. Diversity, tbi and chandler's biotic score(bs) in the paenae strem were 3.75, 14.5, and 100 on average, respectively. Based on biological and chemical indices the paenae stream was clean in the range of xeno- and oligo- saprobity.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.2
• /
• pp.292-298
• /
• 2008

This study was experimentally investigated to understand the ice making characteristics of ice on a coil type ice maker. The experiment was carried out under the following conditions which are the brine temperatures of $-10[^{\circ}C],\;-8[^{\circ}C],\;-6[^{\circ}C]$, brine flow velocities of 1.0[m/s], 1.4[m/s], 1.8[m/s] and initial water temperatures of $6[^{\circ}C],\;9[^{\circ}C],\;12[^{\circ}C]$, ect. The acquired conclusions shows: 1) Ice making amount is increased with decreasing in the temperature of brine. 2) Total ice making amount shows higher value in larger size coil. However, the ice making amount per heat transfer area is increased in smaller one. 3) The ice making amount is increased with decreasing in the initial water temperature. 4) It is cleared that the overturn of natural convection existed in this experimental result.