• 제목/요약/키워드: economic calculation

검색결과 371건 처리시간 0.037초

비상 발전기를 이용한 유도전동기의 소프트 기동 시스템 (Soft Start System of Induction Motor using Emergency Generator)

  • 황보찬;고재하;이정환;박성미;박성준
    • 한국산업융합학회 논문집
    • /
    • 제25권3호
    • /
    • pp.433-441
    • /
    • 2022
  • In general, in an emergency generator system for an electric facility including an induction motor load, an emergency power generation facility larger than the facility load capacity is built due to the initial starting current of the induction motor. In order to reduce this economic burden, various methods to reduce the inrush current of induction motors are applied to suppress the additional expansion of generators due to the reduction of power generation facilities and the increase in electrical facilities. Among these methods, when a system with a built-in soft start function of an induction motor using an inverter is built, it is the best way to reduce the inrush current of the induction motor to less than the rated current. However, in this case, the installation cost of the inverter to drive the induction motor increases. This paper proposes a soft start method of an induction motor by expanding the frequency and voltage control operation area of an emergency generator. In addition, proposed a speed calculation method based on power factor information, which is essential information for stable soft start of an induction motor, and a method for generating a speed command value of the governor for starting with maximum torque.

Prospects For The Development Of Distance Educational Learning Technologies During The Training Of Students Of Higher Education

  • Rohach, Oksana;Pryhalinska, Tetiana;Kvasnytsya, Iryna;Pohorielov, Mykhailo;Rudnichenko, Mykola;Lastochkina, Olena
    • International Journal of Computer Science & Network Security
    • /
    • 제22권9호
    • /
    • pp.353-357
    • /
    • 2022
  • This article identifies the problems and substantiates the directions for the development of distance learning technologies in the training of personnel. An example of using digital media to create a remote access laboratory is given. The article is devoted to the definition of the main aspects of the organization of distance education. Rapid digitization, economic, political and social changes taking place in Ukraine necessitate the reform of the education system. First of all, it concerns meeting the educational needs of citizens throughout their lives, providing access to educational and professional training for all who have the necessary abilities and adequate training. The most effective solution to the above-mentioned problems is facilitated by distance learning. The article analyzes the essence and methods of distance learning organization, reveals the features of the use of electronic platforms for the organization of this form of education in different countries of the world. The positive characteristics of distance learning are identified, namely: extraterritoriality; savings on transport costs; the interest of modern youth in the use of information tools in everyday life; increase in the number of students; simplicity and accessibility of training; convenient consultation system; democratic relations between the student and the teacher; convenience for organizations in training their employees without interrupting their regular work; low level of payment for distance education compared to traditional education; individual learning pace; new teacher status. Among the negative features of online education, the author refers to the following problems: authentication of users during knowledge verification, calculation of the teacher's methodological load and copyright of educational materials; the high labor intensity of developing high-quality educational content and the high cost of distance learning equipment; the need to provide users with a personal computer and access to the Internet; the need to find and use effective motivation mechanisms for education seekers.

제철소 코크스 오븐 가스 부생수소 전과정 온실가스 배출량 분석 (Life Cycle Analysis of Greenhouse Gas Emissions of By-Product Hydrogen Produced from Coke Oven Gas in Steel Mill)

  • 이예임;신우재;유예진;송한호
    • 한국수소및신에너지학회논문집
    • /
    • 제33권6호
    • /
    • pp.636-642
    • /
    • 2022
  • The "Hydrogen Economic Activation Road map" was announced in 2019, and hydrogen demand is expected to exceed 470,000 tons per year in 2022 and keep increasing. Under this circumstance, it has become important to understand the greenhouse gas (GHG) emissions associated with various hydrogen production pathways. In this study, the evaluation of life cycle GHG emissions regarding the hydrogen produced as by-product from coke oven gas (COG) in steel mill is conducted. To cover the possible range of operations, three literatures were reviewed and their data of inputs and outputs for the process were adopted for calculation. Life cycle inventories and emission factors were mostly referred to GaBi and Intergovernmental Panel on Climate Change (IPCC) guidelines, respectively. When there are multiple products from a single process, the energy allocation method was applied. Based on these sources and the assumptions, the life cycle emission values of COG-based hydrogen were found to be 3.8 to 4.7 kg/CO2-eq./kg-H2.

Landfill gas-landfill degassing system and methods of using landfill gas at Sarajevo landfill

  • Dzevad Imamovic;Amra Serdarevic
    • Coupled systems mechanics
    • /
    • 제12권6호
    • /
    • pp.531-537
    • /
    • 2023
  • Municipal solid waste landfills are unpredictable bioreactors which in cases of mishandling and bad supervision presents numerous risks. The key to municipal waste landfills is to approach them from the point of prevention of the possible consequences, which means using methods of organized waste disposal, and also utilizing landfill gas, as an unavoidable consequence with disposal of municipal solid waste with a high share of biodegradable organic matter. This paper presents an overview about problems of solid municipal waste management, type and composition of waste, and an overview of waste management condition. Further, the problem of landfill and landfill gasses is described with the calculation models of landfill production, as well as the use of the SWM GHG Calculator and LandGEM software on a specific example of gas production for the central zone at Sarajevo landfill "Smiljevici". Main focus of this thesis is the analysis of potentials of greenhouse gas emission reduction measures from the waste management. Overview of the best available techniques in waste management is presented as well as the methodology used for calculations. Scenarios of greenhouse gas emission reduction in waste management were defined so that emissions were calculated using the appropriate model. In the final section of the paper, its description of the problem of collection and utilization the landfill gas at the sanitary landfill "Smiljevici", and implementation of the system for landfill gas collection and solution suggestion for the gasification and exploitation of gas. Energy, environmental and economic benefits can be accomplished by utilizing municipal solid waste as fuel in industry and energy and moreover by utilizing energy generation from landfill gas, which this thesis emphasizes.

절취 연약점성토의 성토재 활용에 따른 압밀침하량 산정에 관한 연구 (A Study on Consolidation Settlement Calculation of Cutting Soft Clay as Fill Material)

  • 박용희
    • 한국지반환경공학회 논문집
    • /
    • 제25권4호
    • /
    • pp.5-12
    • /
    • 2024
  • 간석지(공유수면) 내 단지를 조성하는 경우, 해안 퇴적지반 특성상 대규모 성토재가 필요하고, 단지공사 시 불가피하게 발생되는 연약점성토를 성토재료로 활용하는 것이 자원재활용 및 경제적 측면(소요토량감소)에서 필요한 실정이다. 본 연구에서는 연약점성토의 성토재활용에 따른 절취교란된 점성토의 압밀특성변화를 파악하고, 압밀침하량 설계방안에 대하여 제안하였다. 연구 대상지의 압밀시험결과를 통해 교란(절취)에 따른 압밀특성치 변화(압축지수감소, 선행하중산정불가)를 확인하였고, 점성토 성토층을 복합대상층(압밀대상 및 상재하중층)으로 산정(압밀침하량)하는 방안이 실제거동과 부합한 결과로 분석되었다.

AHP를 활용한 가축분뇨 처리시설 및 관련기술 평가지표 가중치 설정 (The Weight Analysis of Evaluation Indicators for Assessing Livestock Manure Treatment System and its Technology by AHP)

  • 김재환;조승희;곽정훈;최동윤;정광화;천동원;이성현;김진호;소규호;박치호
    • 한국축산시설환경학회지
    • /
    • 제17권sup호
    • /
    • pp.51-60
    • /
    • 2011
  • 본 연구는 '가축분뇨의 관리 및 이용에 관한 법률'에 의거 '08년부터 농촌진흥청에서 수행하고 있는 '가축분뇨 처리시설 및 관련기술 평가' 사업의 효과나 평가 절차 및 방법 등에 대해 점검해 보고, 각 평가항목 간의 AHP (Analytic Hierarchy Process, 계층분석법)를 통하여 가중치의 타당성 검토와 제도운영의 개선방안을 마련하고자 직접적 이해관계자인 평가를 받은 30개 업체의 전문가를 대상으로 우편 설문조사를 실시하여 분석하였다. 본 평가사업의 종합평가 결과는 시설업체 및 축산농가 등에 가축분뇨 처리시설에 대한 신뢰성 확보에 도움이 되었으며, 평가의 주요 항목인 '업체의 능력', '기술력', '시설의 처리효율', '시설의 편이성', '경제성'에 대해서는 평가결과의 객관성 측면에서 70% 이상이 보통 이상이라 응답하고 있으나 객관적 평가 또는 매우 객관적이라 응답한 비율은 각각 46.4%, 46.4%, 57.1%, 53.6%, 35.7%로써 경제성 평가분야가 가장 낮아 이에 대한 보완이 필요함을 나타내었다. 또한 가축분뇨 처리시설에 대한 종합평가시 평가 항목간 합리적 가중치를 부여하기 위하여, AHP를 실시한 결과 공법 선택의 기준 중 기술성과 경제성에 대한 가중치는 0.425, 0.575로서 경제성의 비중이 높았다. 기술성 요소로 대표되는 '기술의 현장 적용성'과 '시설의 관리 용이성' 및 '처리 효율성'에 대한 가중치는 각각 0.226, 0.375, 0.399로서 '처리 효율성'이 가장 높았으며, '기술의 현장 적용성'이 가장 낮게 평가 되었다. 이러한 결과를 바탕으로 현재의 가중치와 비교해 보면 현재는 기술성 특히 처리효율에 대해 과대 평가되고 있어 개선이 필요하다. 따라서, 추후 가축분뇨 처리시설 종합평가시 AHP를 이용한 각 항목별 가중치를 적용한 기술성 평가를 종합적으로 고려할 경우 평가의 객관성 확보와 평가사업의 신뢰도를 높이는데 크게 기여할 것으로 판단되며, 향후 다수의 계층적 요인과 기술 수요자도 포함하여 분석 범위를 확대할 필요가 있다.

간호조무사의 근무환경인식과 성격성향에 관한 연구 (A Study on the Working Environment Recognition and the Caracter Disposition of Nurse Aides)

  • 이선이
    • 한국보건간호학회지
    • /
    • 제4권1호
    • /
    • pp.57-74
    • /
    • 1990
  • As the whole world took on the tendency to be highly industrialized, it became necessary for each field of occupation to require professional man power. Especially, since the World War n, the participation of woman power in economic activities has been continually increasing. In our country also, because of the rapid economic growth, change in the way of thinking of women as well as their participation in economic activities are increasing. Thus, woman power is being utilized in various occupational fields from simple physical labor to those that require high-professional skill. Also, continued economic development policies, by setting the establishment of welfare society as the ideology to be fulfilled, brought expansion of medical facilities in the field of public health and increase in man power in that field. As for the nursing specialists, more than 6000 have been being produced per year and as of the end of 1988, the total number of nursing specialists, reached 123, 115. Therefore, this study is done to recognize the professional knowledge and ability of nursing specialists, who take up $40\%$ of the total public-health related man power in our country, through evaluating their working environment and their disposition of character. This study, which was done from September 18th to September 30th 1989, took on the method of using formed questionnaires that had been amended and supplemented during two preparatory investigations, 322 of such questionnaires were used as an analytical material. In the formation of questionnaires, 12 questions were related to the working environment, and 26 in fortotal were related to the disposition of character, 5 for wise-disposition, 11 for activedisposition and 10 for open-disposition. The measuring method, which used 5-point-standard, allowed 5 points for affirmative recognition of the working environment, also 5 points for showing wise, active and open disposition of character and only point in opposite cases. Collected materials were analyzed, through an electronic calculation, into the average value, the standard deflection percentage, pearson corelative number and stepwise multiple regression. Summarizing the results from this study is as follows: 1. It was shown that the nursing specialists with the average of 3.07 have affirmative recognition of their working environment. The questions which drew most affirmative reaction were those concerning finance-management system such as hand, the questions that received negative reaction were those concerning communication method with the average of 2.49. Such reaction seems to have resulted from the cramming regulation by the superior authorities. Concerning the recognition of working environment in relation to employment conditions, more affirmative recognition is shown with the average of 3.14. at hospitals where injection job is not performed. The nursing specialists working at regular hospitals show more affirmative recognition than those at general hospitals, the averages being respectiely 3.16 and 3.03. 2. As for the disposition of character of the nursing specialists, active-disposition was highest with the average of 3.38, next was wise-disposition with 3.20 and the lowest was open-diposition with 2.98. Variable-wise disposition of character shows that wise-disposition and academic background are beneficially correlated by 0.12. Ative-disposition and open-disposition show correlation to the office term by respectively 0.16 and 0.21. In other words. better academic background leads to higher wise-disposition and more - experience results in higher active and open disposition. Also, the class that performs the injection job, in relation to the working environment, might cause change in the self-conceit that identify those in that class with the nurses; however, as far as professional judgment and action, in dealing with nursing job, being wise, active and open is concerned, not much effect is made. 3. The relation between the recognition of the working environment and the disposition of character is that more afirmative recognition- a nursing specialist has about her working environment, the higher the active-disposition becomes by 0.13. The degrees of the relation between recongnition of environment and wise and open dispositions show respectively 0.06 and -0.06 and -0.06. That is to say that when having more affirmative recognition of the working environment, a nursing specialist shows wise but closed disposition of character. This, howerver, didn't mean much statistically. When observing the results mentioned above, it is conspicuous that the nursing specialists, working as substitutes for the nurse at medical institutions of various sizes, get the feeling of being somewhat equal to the nurses and to some extent, fulfill their desire to accomplish their ego; however, as far as professional ability expansion if concerned. they lack wise and open dispositions. Therefore, considiering upon the results of this study, in medical institutions where the work of nursing specialists is regaded equal to that of the nurses, as a medical member who deals with human lives, it is desirable to make the nursing specialists work under the supervision of the nurses and to offer them continuous education to strengthen and improve their natural dispositions.

  • PDF

공용 복합기 출력 기능 소모품들의 Eco Design Index 산정 (Calculation of the Eco-Design Index for Components of the Multi-function Printer)

  • 이주영;이종석;김종민;이건모
    • 대한환경공학회지
    • /
    • 제38권6호
    • /
    • pp.334-342
    • /
    • 2016
  • 기존의 에코디자인은 제품의 환경성 측면만을 고려하여 수행하였다. 이는 에코디자인 수행 시 제품의 환경측면 분석을 통해 파악된 주요 부품이 개선 대상이었다는 것을 의미한다. 나아가 최근 경제성 측면까지 고려하여 에코디자인을 수행하고 있는데, 이는 주로 공급자의 입장이 반영된 에코디자인이며, 소비자의 입장이 제대로 반영된 에코디자인이라고 보기 힘들다. 따라서 소비자의 입장에서 얻을 수 있는 가치에 대한 지표인 UV (Utility Value)를 고려한 새로운 에코디자인이 필요하다. 따라서, 환경적 측면뿐만 아니라 제품의 경제적 측면과 소비자효용가치(Utility value, UV) 적 측면을 동시에 고려한 에코디자인 지수(Eco-Design Index, EDI) 는 에코디자인을 평가하는 새로운 대안이 될 수 있다. 이 연구의 목적은 제품의 환경성, 경제성 및 소비자효용가치를 고려하여 에코디자인 지수의 로직(Logic)을 제안하고, 이를 공용 복합기의 출력 기능을 수행하는 부품에 적용하여 그 의의를 알아보고자 하는 것이다. 이는, 공용 복합기 부품들의 Utility Value (UV), Life Cycle environmental impact (LCE), 및 Life Cycle Cost (LCC) 값을 정량화하여 EDI를 산정한 뒤, 이를 토대로 에코디자인의 개선대상이 되는 부품을 파악하는 에코디자인의 새로운 접근방법을 제시하는 것이다. 이 연구의 대상 제품인 8가지의 부품 중 롤러의 경우 환경성과 경제성 측면에서 가장 우수한 부품으로 나타났지만 UV 값은 8개 부품들 중 가장 낮았다. 롤러의 EDI 순위는 8개 부품 중 4위에 불과했다. 전사벨트는 환경성과 경제성 측면에서 각각 8위와 5위를 나타낸 반면, UV 값이 2번째로 높게 산정되어, EDI 순위는 8개 중 3위였다. 이것은 에코디자인 정도를 평가할 때에 환경성뿐만 아니라 경제성과 UV 측면 또한 반드시 고려해야 한다는 것을 의미한다.

The Contribution of Innovation Activity to the Output Growth of Emerging Economies: The Case of Kazakhstan

  • Smagulova, Sholpan;Mukasheva, Saltanat
    • 유통과학연구
    • /
    • 제10권7호
    • /
    • pp.33-41
    • /
    • 2012
  • The purpose of this study is to analyse the state of the energy industry and to determine the efficiency of its functioning on the basis of energy conservation principle and application of innovative technologies aimed at improving the ecological modernisation of agricultural sectors of Kazakhstan. The research methodology is based on an integrated approach of financial and economic evaluation of the effectiveness of the investment project, based on calculation of elasticity, total costs and profitability, as well as on comparative, graphical and system analysis. The current stage is characterised by widely spread restructuring processes of electric power industry in many countries through introduction of new technical installations of energy facilities and increased government regulation in order to enhance the competitive advantage of electricity market. Electric power industry features a considerable value of creating areas. For example, by providing scientific and technical progress, it crucially affects not only the development but also the territorial organisation of productive forces, first of all the industry. In modern life, more than 90% of electricity and heat is obtained by Kazakhstan's economy by consuming non-renewable energy resources: different types of coal, oil shale, oil, natural gas and peat. Therefore, it is significant to ensure energy security, as the country faces a rapid fall back to mono-gas structure of fuel and energy balance. However, energy resources in Kazakhstan are spread very unevenly. Its main supplies are concentrated in northern and central parts of the republic, and the majority of consumers of electrical power live in the southern and western areas of the country. However, energy plays an important role in the economy of industrial production and to a large extent determines the level of competitive advantage, which is a promising condition for implementation of energy-saving and environmentally friendly technologies. In these circumstances, issues of modernisation and reforms of this sector in Kazakhstan gain more and more importance, which can be seen in the example of economically sustainable solutions of a large local monopoly company, significant savings in capital investment and efficiency of implementation of an investment project. A major disadvantage of development of electricity distribution companies is the prevalence of very high moral and physical amortisation of equipment, reaching almost 70-80%, which significantly increases the operating costs. For example, while an investment of 12 billion tenge was planned in 2009 in this branch, in 2012 it is planned to invest more than 17 billion. Obviously, despite the absolute increase, the rate of investment is still quite low, as the total demand in this area is at least more than 250 billion tenge. In addition, industrial infrastructure, including the objects of Kazakhstan electric power industry, have a tangible adverse impact on the environment. Thus, since there is a large number of various power projects that are sources of electromagnetic radiation, the environment is deteriorated. Hence, there is a need to optimise the efficiency of the organisation and management of production activities of energy companies, to create and implement new technologies, to ensure safe production and provide solutions to various environmental aspects. These are key strategic factors to ensure success of the modern energy sector of Kazakhstan. The contribution of authors in developing the scope of this subject is explained by the fact that there was not enough research in the energy sector, especially in the view of ecological modernisation. This work differs from similar works in Kazakhstan in the way that the proposed method of investment project calculation takes into account the time factor, which compares the current and future value of profit from the implementation of innovative equipment that helps to bring it to actual practise. The feasibility of writing this article lies in the need of forming a public policy in the industrial sector, including optimising the structure of energy disbursing rate, which complies with the terms of future modernised development of the domestic energy sector.

  • PDF

LED 조명의 광원별 최소 분광분포를 사용하여 자연광 색온도를 재현하는 방법 (A Method of Reproducing the CCT of Natural Light using the Minimum Spectral Power Distribution for each Light Source of LED Lighting)

  • 김양수;오승택;임재현
    • 인터넷정보학회논문지
    • /
    • 제24권2호
    • /
    • pp.19-26
    • /
    • 2023
  • 인간은 자연 빛에 적응하고 진화해왔으나 현재는 실내 생활의 비중이 높아짐에 따라 생체리듬 교란의 문제가 유발되었다. 이의 해결을 위해 일출~일몰간 다채롭게 변화하는 자연광의 색온도를 재현하는 조명이 연구되고 있다. 자연광 색온도의 재현을 위해서는 색온도가 다른 다수의 LED 광원을 사용하여 조명을 제작한 후 수백에서 수천 단계의 광원별 인가전류의 조합에 대한 광특성을 측정 및 수집하여 제어지표 DB를 구성하고 광특성 매칭 방법을 통해 조명을 제어하였다. 이러한 제어 방법은 인가전류의 조합 단계를 세밀하게 할수록 많은 시간 및 경제적 비용이 발생한다는 문제가 있다. 이에 본 논문에서는 LED 광원별 최소 분광분포로 보간 및 조합 연산을 수행하여 자연광 색온도를 재현하는 방법을 제안한다. 먼저 색온도가 다른 광원 채널로 구성되고 각 채널별 256단계의 인가전류 제어 기능을 구현한 LED 조명을 대상으로 채널별 5개의 최소 분광분포(Spectral Power Distribution, SPD)를 실측·수집한다. 이후 수집한 SPD를 대상으로 각 채널별 256단계의 SPD를 생성하는 보간 연산을 수행하고, 채널별 SPD의 조합 연산을 통해 LED 조명의 모든 제어 조합에 대한 SPD를 생성한다. 생성된 SPD를 통해 조도와 색온도를 산출하여 제어지표 DB를 구축한 후 매칭 기법을 통해 자연광의 색온도를 재현한다. 성능 평가에서는 실내 권장 조도 기준을 충족하면서도 평균 오차율 0.18%의 범위 내에서 자연광의 시간별 색온도를 제공하였다.