• Progress in Medical Physics
• /
• v.17 no.2
• /
• pp.67-76
• /
• 2006

We evaluated the accuracy of a patient setup error correction due to reference image quality for a 2D-2D matching process. Digitally reconstructed radiographs (DRRs) generated by use of the Pinnacle3 and the Eclipse for various regions of a humanoid phantom and a patient for different CT slice thickness were employed as a reference images and kV X-ray Images from the On-Board Imager were registered to the reference DRRs. In comparison of the DRRs and profiles, DRR image quality was getting worse with an increase of CT image slice thickness. However there were only slight differences of setup errors evaluation between matching results for good and poor reference DRRs. Although DRR image quality did not strongly affect to the 2D-2D matching accuracy, there are still potential errors for matching procedure, therefore we recommend that DRR images are needed to be generated with less than 3mm slice thickness for 2D-2D matching.

• Progress in Medical Physics
• /
• v.21 no.2
• /
• pp.218-222
• /
• 2010

As radiation is irradiated from various directions in intensity modulated radiation therapy (IMRT), longer treatment time than conventional treatment method is taken. In case of the patients who have problem to keep same posture for long time because of pain and injury, reducing treatment time through increased dose rate is a way for effective treatment. This study measured and found out the variation of dose and dose distribution in accordance with dose rate variation. IMRT treatment plan was set up to investigate from 5 directions - $0^{\circ}$, $72^{\circ}$, $144^{\circ}$, $216^{\circ}$, $288^{\circ}$ - using ECLIPSE system (Varian, SomaVision 6.5, USA). To confirm dose and dose rate in accordance with dose rate variation, dose rate was set up as 100, 300, 500 MU/min, and dose and dose distribution were measured using ionization chamber (PTW, TN31014) and film dosimeter (EDR2, Kodak). At this time, film dosimeter was inserted into acrylic phantom, then installed to run parallel with beam's irradiating direction, 21EX-S (Varian, USA) was utilized as linear accelerator for irradiation. The measured film dosimeter was analyzed using VXR-16 (Vidar System Corporation) to confirm dose distribution.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.11
• /
• pp.984-997
• /
• 2015

Chang'e-3 consisting of a lunar lander and exploration rover was launched on December 1, 2013 aboard a Long March 3B rocket flying from Xichang space launch center. Chang'e-3 was inserted into the lunar orbit after about a 5-day transit to the Moon and landed on the targeted landing site after orbiting around the Moon for 8 days. The successful landing of the Chang'e-3 gives a lot of help to analyze the future needs of the subsystem technologies and to figure out the trajectory from launch to lunar landing as well as operation sequences in the development of Korean lunar exploration is scheduled. Therefore, the configuration and analysis of overall mission of Chang'e-3 is performed based on the public information from the press and website. As a result, overall mission trajectory is reconstructed by solving boundary condition and then estimating control variable. Visibility status and eclipse status also analyzes so communication and power charge condition is as good as to operate lunar lander. Mass budget of the lander is derived using ${\Delta}V$ according to specific impulse.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.12
• /
• pp.950-958
• /
• 2013

The Lunar orbiter is expected to be inserted into a ~300km low Earth orbit using Korea Space Launch Vehicle-II(KSLV-II). After the states are successfully determined with obtained tracking data, the Trans Lunar Injection(TLI) burn has to be done at appropriate epoch to send the lunar orbiter to the Moon. In this study, we describe in detail the mission scenario of the Korean lunar orbiter from the launch at NARO Space Center to lunar orbit insertion(LOI) stage following direct transfer trajectory. We investigate the launch window including launch azimuth, delta-V profile according to TLI and LOI burn positions. We also depict the visibility conditions of ground stations and solar eclipse duration to understand the characteristics of the direct transfer trajectory. This paper can be also helpful not only for overall understanding of ${\Delta}V$ trend by changing TOF and coasting time but for selecting launch epoch and control parameters to decrease fuel consumption.

• Journal of The Korean Association For Science Education
• /
• v.16 no.1
• /
• pp.61-76
• /
• 1996

The purpose of this study was to apply the instructional strategies for conceptual change prescribed by Posner et al(1982) to the astronomic content domain taught in the elementary and middle school and to analyze the characteristics of students' knowledge revealed in the test before, during and after the instruction. Also, it was to investigate the intercorrelation of cognitive levels, spatial ability and science achievement. The major findings of this study are as follows: 1. Students had a great variety of misconceptions related to the motion of the moon before the instruction, that is, the phases, the names of phases and the cause of changing phases by the moon's orbit about the earth, the moon's appearance and location at the given time, the relative positions of earth, moon and sun during a lunar eclipse, the cause that a full moon is not at the line of node once a month. In the analysis of students' responses concerning the cause of changing phases of the moon and a lunar eclipse, the results indicate that the great majority of students had rote learning rather than meaningful learning in the middle school. 2. Students' reponses during the instruction concerning the changing phases of the moon and the predictive knowledge about the motions of the earth and the moon were analyzed. 1) According to the results of the test given before and after experiment, after discussion, achievement score of the whole of subjects and groups in both preformal and formal cognitive levels appeared to increase linearly. 2) There was no statistically significant differences of achievement scores before and after experiment, after discussion between preformal group and formal group in cognitive levels. 3. Distribution of achievement scores according to the whole of subjects and groups in preformal and formal cognitive levels shows that there was a statistically significant difference between pretest and posttest. 4. Types of conceptual changes concerning the cause of changing phases of the moon that occurred from pretest to posttest were classified as accommodation, incomplete accommodation, assimilation, no change and no model. Six of the seven students starting instruction with alternative frameworks didn't sustain those alternative models throughout instruction. Five of these six students accommodated completely and the last one partially. Seventy-nine percentage of students taking instruction with fragmental models assimilated correct propositions at the end of the instruction. These results suggest that conceptual change model prescribed by Posner et al(1982) has promised the meaningful learning to students taking with fragmental models, especially in cases where students with misconception enter instruction. 5. High correlation between achievement score of simple-recall items and that of written items in pretest and posttest indicates that the higher students got the score in simple-recall items the better they also performed in written items. However, there was no statistically significant differences among cognitive levels, spatial ability and science achievement in the whole of subjects and groups according to the cognitive levels.

• Progress in Medical Physics
• /
• v.15 no.4
• /
• pp.237-246
• /
• 2004

Even though the wedge factor was defined by ICRU, RTPS uses other definition different from the wedge factor to consider the wedge effect to correct dose. Because the factors with different concept are defined in a very different way, replacement of different factor could make severe error of dose and is unacceptable because their values are very different from each other. Radiotherapy machine installed in department includes physical wedges and function of dynamic wedge by upper jaws, and Eclipse and Pinnacle$^{3}$ such as RTPS are used. The wedge factors, relative wedge output factors and wedge field output factors of physical wedges and dynamic wedges were measured by an ionization chamber in water phantom. They are analyzed and compared in according to wedge position, field size, wedge angle, X-ray quality, measurement condition. Wedge factor, relative wedge output factors and wedge field output factors of dynamic wedges comparing physical wedges have an effect of several factors. Main factors effecting to the factors of dynamic wedges were field size and wedge angle. Beam quality of X-ray introduces a few effect to the factors. Because the factors related to wedge and defined with different concepts are different from each other, to reduce dose error it should be input by values proper to RTPS.

• Progress in Medical Physics
• /
• v.25 no.4
• /
• pp.242-247
• /
• 2014

To see the discrepancies between the calculated and the delivered dose distribution of IMRT fields for respiratory-induced moving target according to the motion ranges. Four IMRT plans in which there are five fields, for lung and liver patients were selected. The gantry angles were set to $0^{\circ}$ for every field and recalculated using TPS (Eclipse Ver 8.1, Varian Medical Systems, Inc., USA). The ion-chamber array detector (MatriXX, IBA Dosimetry, Germany) was placed on the respiratory simulating platform and made it to move with ranges of 1, 2, and 3 cm, respectively. The IMRT fields were delivered to the detector with 30~70% gating windows. The comparison was performed by gamma index with tolerance of 3 mm and 3%. The average pass rate was 98.63% when there's no motion. When 1.0, 2.0, 3.0 cm motion ranges were simulated, the average pass rate were 98.59%, 97.82%, and 95.84%, respectively. Therefore, ITV margin should be increased or gating windows should be decreased for targets with large motion ranges.

• Food Science and Preservation
• /
• v.14 no.6
• /
• pp.722-726
• /
• 2007

Extracting and analytical conditions of curcumin, and removal of bitterness substance from Curcuma longa L. were investigated. Absorption maxima was shown to be 424 nm at methanol solvent. Optimal conditions for analysis of curcumin was Zorbax eclipse $C_{18}$ column ; mobile phase, 75% MeOH ; flow rate, 0.8 mL/min ; wave length, UV 424 nm. Curcumin component was analyzed to be the highest content in methanol extract. In all samples, extraction yield by heating was shown to be effective as compared to room temperature. Curcumin contents of methanol and ethanol extracts in extraction of room temperature were 14.4 and 14.2 times higher than that of water extract, respectively. Two hot solvent extracts has a high curcumin content being 150 mg% as compared to room temperature. Extracting time was an effective condition when it was extracted for 60 minutes for elevating the curcumin content of water and methanol extracts. Bitter substance (BS) was markedly decreased in water extract by heat treatment of above $80^{\circ}C$. BS was weak in $121^{\circ}C$ treatment than in room temperature and it was however strong in $100^{\circ}C$ treatment. RT and $70^{\circ}C$ heat treatment were not different in BS intensity.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.11
• /
• pp.2083-2090
• /
• 2006

In an proposed Context-Aware SOA(Service Oriented Architecture) based OSGi(Open Service Gateway initiative) platform, Service provider manages relative kinds of services in an integrative basis from various sensors, puts each service in a SOAP (Simple Object access Protocol) message, and register thorn to the UDDI(Universal Description Discovery and Integration) server of service registry, service requester retrivel the specified kinds of services and call them to service provider. Recently most context-aware technologies for ubiquitous home network are mainly putting emphasis on RFID/USN and location-based technology. Because of this, service-oriented architecture researches have not been made enough. Under the environment of an OSGi service platform, various context-aware services are dynamically mapping from various sensors, new services are being offered for the asking of users, and existing services are changing. Accordingly, the data sharing between services provided, management of service life cycle, and the facilitation of service distribution are needed. Taking into considering all these factors, this study has suggested an Context-Aware SOA based eclipse SOA Tools Platform using OSGi platform that can transaction throughtput of more than 546 TPS of distributional Little's Law from ATAM(Architecture Tradeoff Analysis Method) while remaining stable other condition.

• The KIPS Transactions:PartA
• /
• v.16A no.2
• /
• pp.125-134
• /
• 2009

This paper proposes a change management system of sensor network applications based on version synchronization that supports to effectively manage defect correction of applications, change of functions for applications or improvement of applications without suspending the sensor network. The proposed change management system consists of the NADE which is an application development environment, the Node Management Server, and the Node Agent. NADE is an Eclipse-based development environment for developing applications which are installed into nodes. NADE is also connected with CVSNT which is a version management tool and performs application version management using the CVSNT. Node Management Server manages nodes to maintain latest versions of applications by synchronizing versions of applications which are performed on the nodes with the versions of applications which are developed in the NADE. Node Agent which is loaded into the node periodically sends the version information of the application to the server, and stores and updates the version information of the application. Through the proposed change management system, applications of nodes are automatically updated when versions of applications are changed by correcting defects, changing functions or improving applications. Therefore, the user can effectively manage the execution of sensor network system without suspending or delaying the sensor network. Also, visibility of change management for sensor network applications will be improved.