• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.651-654
• /
• 2006

The inline manufacturing equipment using a combination of the belt source and LPS source which is innovatively designed is introduced for the largesize AMOLED. The features of the inline system include 60sec TACT time, 19 numbers of chambers, non-substrate bending and easy application to very thin TFT substrates for the $4^{th}$ - $8^{th}$ Generation AMOLEDs.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.144-148
• /
• 1989

We solve the inverse kinematics problems in robotics by employing a neural network. In the practical situation. it is not easy to obtain the exact inverse kinematics solution, since there are many unforeseen errors such as the shift of a robot base the link's bending, et c. Hence difficulties follow in the trajectory planning. With the neural network, it is possible to train the robot motion so that the robot follows the desired trajectory without errors even under the situation where the unexpected errors are involved. In this work, Back-Propagation rule is used as a learning method.

• EDISON SW 활용 경진대회 논문집
• /
• 제4회(2015년)
• /
• pp.488-490
• /
• 2015

In this paper, the selfie stick which can involved in small bag is designed to make easier and smaller. Model the diameter of the selfie to achieve light weight for the fixed length using FreeCAD. After modeling, check durability using 'Netgen' and 'Calculix'.

• 한국의상디자인학회지
• /
• 제12권3호
• /
• pp.93-103
• /
• 2010

The results of comparison and analysis of dynamical features according to Jacquard structure are as follows. Regarding elongation(E) value in tensile property, the value in the direction of course was found to be larger in all Jacquard structure, except floating Jacquard, than the direction of wale. It could be found that, as to bending strength(B) in Bending Property, the value of bending strength in the direction of course smaller in all the textile(structure) except floating than the direction of wale, so that the ability of curve formation is excellent. And in case of floating Jacquard, it showed the smallest value in the direction of course and wale, so that it was interpreted as Jacquard having a soft feel. Blister Jacquard showed the highest value in both directions of course and wale, so that it was evaluated as Jacquard having the hardest touch. With regard to shearing character(G) and shearing hysteresis(2HG) in Shearing Property, Jacquard indicated the lowest value, so it was evaluated as the textile(structure) having high drape the transformation of whose fabric is easy. In addition, normal Jacquard, transfer Jacquard, blister Jacquard showed a high value, so that it could be known they are Jacquards having stiff touch. The study implies that normal Jacquard, bird's eye Jacquard, etc., which well stretch in the direction of a course like tubular Jacquard course, is better to make the margin a little shorter than the basic margin, and Jacquard that well stretches in the direction of wale like ladder's back Jacquard and floating Jacquard is better to make the margin longer and the length shorter than the basic margin.

• Geomechanics and Engineering
• /
• 제30권2호
• /
• pp.139-151
• /
• 2022

The mechanical properties of expansive soil are very unstable, highly sensitive to water, and thus easy to cause major engineering accidents. In this paper, the expansive soil foundation pit project of the East Huada Square in the eastern suburb of Chengdu was studied, the moisture content of the expansive soil was considered as an important factor that affecting the mechanics properties of expansive soil and the stability of the non-equal-length double-row piles in the foundation pit support. Three groups of direct shear tests were carried out and the quantitative relationships between the moisture content and shear strength τ, cohesion c, internal friction angle φ were obtained. The effect of cohesion and internal friction angle on the maximum displacement and the maximum bending moment of piles were analyzed by the finite element software MIDAS/GTS (Geotechnical and Tunnel Analysis System). Results show that the higher the moisture content, the smaller the matrix suction, and the smaller the shear strength; the cohesion and the internal friction angle are exponentially related to the moisture content, and both are negatively correlated. The maximum displacement and the maximum bending moment of the non-equal length double-row piles decrease with the increase of the cohesion and the internal friction angle. When the cohesion is greater than 33 kPa or the internal friction angle is greater than 25.5°, the maximum displacement and maximum bending moment of the piles are relatively small, however, once crossing the points (the corresponding moisture content value is 24.4%), the maximum displacement and the maximum bending moment will increase significantly. Therefore, in order to ensure the stability and safety of the foundation pit support structure of the East Huada Square, the moisture content of the expansive soil should not exceed 24.4%.

• 한국의류학회지
• /
• 제20권6호
• /
• pp.1039-1047
• /
• 1996

The purpose of this study is to examine and to evaluate the properties of pile materials to produce velvet fabrics which have excellent handle. In order to perform this purpose, the mechanical properties, hand value (H.V.), total hand value (T.H.V.), total appearance value (T.A.V.) of acetate, cuprammonium rayon, cotton materials for velvet as the typical commercial Pile fabric were measured and analyzed by KES-F system. The important results obtained by this study are as follows. 1 For acetate pile, elogational deformation was easy and bending rigidity of weft was high and elastic recovery was excellent compared with the other materials. 2. Cuprammonium rayon velvet was shown that pile bending rigidity and hysterisis were low. Cotton velvet was shown that compressional energy was high and compressinal elasticity was exellent. 3. In the case that specimens were applied by men's winter suit program, H.V was shown that Koshi of acetate velvet was similar to that of cotton. Numeri of cuprammonium rayon velvet was higher than the others and Fukurami values for all of the three fabrics were similar. 4. But in case that specimens were applied by women's winter suit program Koshi of cuprammonium rayon velvet was lower. But Numeri of that was higher than the others and Fukurami for all of the three fabrics were similar and Sofutosa of cotton velvet was lower than the others. T.H.V. of the acetate velvet was the highest in men's winter suit program while cuprammonium rayon velvet was the highest in women's winter suit program T.A.V. of acetate velvet was highest.

• 한국산업융합학회 논문집
• /
• 제5권1호
• /
• pp.45-52
• /
• 2002

In this study, an exact solution of governing differential equation for the bending problem of partially loaded orthotropic rectangular plates is presented and also its computer program is developed. The method requires that two opposite edges be clamped or simply supported, or one edge clamped and the other simply supported. Any combination of boundary conditions could exist along the other edges. The plate could he subjected to uniform, partially uniform, and line loads. The solution for the deflection of rectangular plate is expressed as a Levy type single Fourier series and the loads arc expressed as a corresponding series. The advantage of the solution is that it overcomes the limitations of the previous Navier's and Levy's methods (limitation of boundary condition and loading conditions of plate), it is easy to program on a computer and it becomes fast to solve the bending problem with computer program. Calculations are presented for isotropic and orthotropic plates with different loading and boundary conditions. Comparisons are made for the isotropic plate with various boundary conditions between the result of this paper and the result of Navier, Levy and Szilard. The deflections were in excellent agreement.

• Steel and Composite Structures
• /
• 제35권5호
• /
• pp.701-715
• /
• 2020

Steel storage racks are lightweight structures, made of thin-walled cold-formed members, whose behaviour is remarkably influenced by local, distortional and overall buckling phenomena, frequently mutually combined. In addition, the need of an easy and rapid erection and reconfiguration of the skeleton frame usually entails the presence of regular perforations along the length of the vertical elements (uprights). Holes and slots strongly influence their behaviour, whose prediction is however of paramount importance to guarantee an efficient design and a safe use of racks. This paper focuses on the behaviour of isolated uprights subjected to both axial load and bending moments, differing for the cross-section geometry and for the regular perforation systems. According to the European standards for routine design, four alternatives to evaluate the bending moment-axial load resisting domains are shortly discussed and critically compared in terms of member load carrying capacity.

• 한국산업융합학회 논문집
• /
• 제21권4호
• /
• pp.159-165
• /
• 2018

In electric agricultural machine a reduction gear is needed to convert the high speed rotation motion generated by DC motor to lower speed rotation motion used by the vehicle. The reduction gear consists of several spur gears. Spur gears are the most easily visualized gears that transmit motion between two parallel shafts and easy to produce. The modelling and simulation of spur gears in DC motor reduction gear is important to predict the actual motion behaviour. A pair of spur gear tooth in action is generally subjected to two types of cyclic stress: contact stress and bending stress. The stress may not attain their maximum values at the same point of contact fatigue. These types of failure can be minimized by analysis of the problem during the design stage and creating proper tooth surface profile with proper manufacturing methods. To improve its life expectation in this study modal and stress analysis of reduction gear is simulated using ANSYS workbench based on finite element method (FEM). The modal analysis was done to understand reduction gear deformation behaviour when vibration occurs. FEM static stress analysis is also simulated on reduction gear to simulate the gear teeth bending stress and contact stress behaviour.

• Steel and Composite Structures
• /
• 제15권4호
• /
• pp.379-397
• /
• 2013

Conoidal shells are doubly curved stiff surfaces which are easy to cast and fabricate due to their singly ruled property. Application of laminated composites in fabrication of conoidal shells reduces gravity forces and mass induced forces compared to the isotropic constructions due to the high strength to weight ratio of the material. These light weight shells are preferred in the industry to cover large column free open spaces. To ensure design reliability under service conditions, detailed knowledge about different behavioral aspects of conoidal shell is necessary. Hence, in this paper, static bending, free and forced vibration responses of composite conoidal shells are studied. Lagrange's equation of motion is used in conjunction with Hamilton's principle to derive governing equations of the shell. A finite element code using eight noded curved quadratic isoparametric elements is developed to get the solutions. Uniformly distributed load for static bending analysis and three different load time histories for solution of forced vibration problems are considered. Eight different stacking sequences of graphite-epoxy composite and two different boundary conditions are taken up in the present study. The study shows that relative performances of different shell combinations in terms of static behaviour cannot provide an idea about how they will relatively behave under dynamic loads and also the fact that the points of occurrence of maximum static and dynamic displacement may not be same on a shell surface.