• The Korean Journal of Nuclear Medicine
• /
• v.13 no.1_2
• /
• pp.7-14
• /
• 1979

Radionuclide cardiac angiography has distinct advantages in safety, patient comfort, cost and ease of performance. This method offers diagnostic accuracy equivalent to that of cardiac catheterization. By this method the qualitative and quantitative diagnosis of the cardiac shunts are available. Also for it is repeatable with ease and more physiologic, it has application in following pre- and post-operative shunt patients. We performed the radionuclide cardiac angiographies in 147 cases of heart diseases and 26 cases of normal group. 1. The detection of left-to-right shunt was possible in 22 of 24 patients, and 2 patients were not diagnosed due to small shunt amount. (Qp/Qs<1.3) In 21 patients of right-to-left shunt, all were diagnosed by radionuclide cardiac angiography. 2. With the pulmonary time-activity curve, $C_2/C_1$ ratio was calculated. In normal control group, a range of $C_2/C_1$ ratios of $21{\sim}38%$ was established with a mean value of $28.6{\pm}4.6%$. In patients with left-to-right shunts determined by catheterization data, the range of $C_2/C_1$ ratio was $33{\sim}90%$, with a mean value of $67.8{\pm}12.2%$. 3. In 8 cases of left-to-right shunt, $Q_p/Q_s$ ratios determined by radionuclide cardiac angiography were compaired with those of cardiac catheterization. The correlation coefficient was 0.907. (P<0.001) 4. Postoperative radionuclide cardiac angiographies were done in 21 cases. 3 of 13 patients with left-to-right shunts were found to have residual shunts. 8 patients with right-to-left shunts were confirmed to have no residual shunt.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.47 no.1
• /
• pp.17-34
• /
• 2023

This study aimed to develop a fitted torso pattern with an improved fit for inverted-triangular males in their twenties. For this study, six torso patterns were collected, compared and evaluated, and a fitted torso pattern was developed using virtual fittings. The research results are as follows. First, the fitted torso pattern received a good rating as a result of the virtual fitting evaluation: waist dart set 2 of the front; the amount of comfort is set at 5 cm around the chest, 4 cm around the waist and 10 cm around the hips. Second, the evaluation of virtual fitting of the development pattern showed that fit evaluation was 4.11/5 points, ease evaluation was 6.53/7 points, and that the stress map and airgap were suitable for the human body. Third, the actual fit evaluation of the development pattern was 4.25/5 points, 6.35/7 points for ease evaluation, and 4.81/5 points for motion evaluation. Fourth, there was no significant difference between the results of the virtual and actual fitting evaluation with the objectivity test. It is therefore possible to apply a pattern developed through a virtual fitting to an actual human body and to confirm the objectivity of the pattern.

• Fashion & Textile Research Journal
• /
• v.16 no.6
• /
• pp.921-926
• /
• 2014

The aim of this study is to develop upper bodice pattern for obese girls aged 10~12 by using 3D virtual garment simulation system. The criteria for subjects in this study were girls who had over 1.46 of the R$\ddot{o}$hrer Index. A total of 229 schoolgirls who met these criteria were enrolled. The results of this study are as follows: First, by using 3D virtual garment simulation, new upper bodice pattern considered obese-schoolgirls was development. The basic numerical formula were as follows ; bust girth B/2+4.5, armhole depth B/4-1, waist girth W/4+0.5+dart amount, front chest width B/6+2, back width B/6+2, neck width B/12-0.5 and neck depth B/12+0.5. Second, armhole darts were added to compensate the loose amount of front armhole and dart manipulation was used to ensure a better appearance on armhole in the design. The dart side line was modified concavely to help cover the protruding stomach. Curved lines on the armhole were significantly relieved using dart manipulation and the darts side line was modified concavely to reduce the tightness around the front waist darts. Third, according to the results of the new upper bodice pattern's appearance evaluation, it estimated more highly than existing pattern in silhouette and ease amount, confirming that new upper bodice pattern was appropriate for the obese-schoolgirls. This study is expected to serve as one of important basic data for ensuing studies that may utilize 3D virtual garment simulation system with 2D patterns.

• The Research Journal of the Costume Culture
• /
• v.23 no.4
• /
• pp.616-627
• /
• 2015

The purpose of this study was to develop slacks patterns for obese-schoolgirls aged 10~12 by using a 3D virtual garment simulation system. The criteria for subjects in this study were girls who had a BMI of over $25kg/m^2$. A total of 155 schoolgirls who met these criteria were enrolled. The results were as follows: First, by using 3D virtual garment simulation, a new slacks pattern considerate of obese-schoolgirls was developed. The basic numerical formulae were as follows: Front and back hip girth of H/4-0.5+1 and H/4+0.5+1.5, front waist girth of W/4+1+0.5, back waist girth of W/4+2+0.5, front crotch extension of H/16-0.5, back crotch extension of H/8-0.5, front dart amount of 1, and back dart amount of 2. Second, according to the new slacks pattern appearance evaluation, the new slacks pattern scored more highly than the existing pattern for silhouette and ease amount, confirming that the new slacks pattern is appropriate for obese-schoolgirls. Additionally, the new slacks pattern was evaluated allowing for the proper space length of the waist, abdomen and hips. This study is expected to serve as important basic data for ensuing studies that may utilize a 3D virtual garment simulation system with 2D patterns and for future 3D pattern production program development.

• The Journal of the Korea Contents Association
• /
• v.19 no.11
• /
• pp.80-91
• /
• 2019

This study investigated the factors affecting the satisfaction and the continuous behavior intention of university students on MOOC. Adopting a questionnaire, the study collected data from 177 students enrolled in K-MOOC classes as an extracurriculum in the university in metropolitan area. Results indicated the following. First, the university students' satisfaction and continuous use intention on K-MOOC are higher during the semester than in vacation. Second, the perceived ease of use, usefulness, and task-technology fit influence the users'satisfaction on K-MOOC. Meanwhile, the perceived ease of use, task-technology, and user satisfaction likewise influence the users'continuous behavior intention. Hence, the study proposes that the subject matter on K-MOOC and the amount of educational content be made diversified, and the period of K-MOOC be made similar with that of the regular semester. The platform should also be stabilized, and the adequacy in mobile environment be improved. To further activate K-MOOC utilization in the university, the depth of contents and interaction between professors and students also need to be considered.

• Fashion & Textile Research Journal
• /
• v.13 no.4
• /
• pp.600-613
• /
• 2011

The purpose of this study is to provide Torso pattern for Korean middle-aged women using 3D human body scan data. 155 women in their 40's or 50's were measured by Martin's anthropometry. Merging the data of 914 middle aged women provided by Korean agency for technology and standards, total of 1,069 subjects' data were analyzed. For data analysis, ANOVA, factor analysis and cluster analysis were done using SPSS PC+. And representative subject of each cluster was selected and they participated in 3D scanning and Torso pattern suggested for middle-aged women Torso pattern which investing the amount of ease according to each group for diffuse front interscye 30%, armscye circumference 30%, back interscye 40% using 3D human body scan data. The results of this study are as follows. Firstly, as a result of the factor analysis, the first factor was 'obesity index of body', The second factor was 'verticality size of body', The third factor was 'verticality length of upper bodice', The fourth factor was 'drop value to represent silhouette', and the fifth factor was 'physique of upper bodice'. And, middle-aged women type were classified 3 types according to the cluster analysis. Type 1(Y-type) was the long upper Torso with wide shoulder. Type 2(H-type) was flat-body type with comparatively thin upper bodice and thin lower bodice. And type 3(A-type) was the obese type with comparatively thin upper bodice and fat lower bodice. Secondly, using CAD program, point filtering was performed and approximated surface model was made. It used that generated surface smoothing corrected for abnormally extruded points and scattered points based on the curvature information. And 3D surfaces were flatted onto the plane by the internal tools of CAD program. Difference ratios of outline length and area between 3D curves and 2D plane were 0.42% and 0.54%, respectively. Third, wearing test by the sensory evaluation showed that distinct difference almost every category. The movement functionality test shows that, in all the tests which reveal significant differences, especially, 'comparison pattern A' experienced inconvenience to neck width and neck depth.

• Journal of the Korean Electrochemical Society
• /
• v.21 no.2
• /
• pp.39-46
• /
• 2018

Many studies on the electrochemical performance of Li secondary batteries have been obtained using coin-type cells due to the ease of assembly, low cost and ensuring reproducibility. The coin-type cell consists of a case, a gasket, a spacer disk, and a wave spring. These structural features require a greater amount of liquid electrolyte to assemble than other types of cells such as laminated cells and cylindrical cells. Nevertheless, little research has been conducted on the effect of excess liquid electrolytes on the electrochemical performances of Li secondary batteries. In this study, we investigate the effect of different amounts of electrolyte on the coin-type cells. The amount of electrolytes is adjusted to 30 and $100mg\;mAh^{-1}$. Cycle performances at room temperature ($25^{\circ}C$) and high temperature ($60^{\circ}C$) and high voltage are performed to investigate the electrochemical properties of the different amount of electrolytes. In the case of the unit cell including the electrolyte of $30mg\;mAh^{-1}$, the discharging capacity retention characteristic is excellent in comparison with the case of $100mg\;mAh^{-1}$ under the high temperature and high voltage condition. The former shows a larger increase in internal resistance than the latter, confirming that the amount of electrolyte significantly influences the discharge capacity retention characteristics of the battery.

• Journal of the East Asian Society of Dietary Life
• /
• v.13 no.6
• /
• pp.601-607
• /
• 2003

This study was attempted to investigate the physicochemical changes during soybean-leaf water kimchis fermentation by adding wheat flour in cooking water. Soybean-leaf water kimchis with five different levels of wheat flour in cooking water(0%;A, 5%;B 10%;c, 15%;D, 20%;E) were tested for rhological parameters, fine structural changes, sensory evaluations and chemical analysis. The composition of the soybean-leaf was moisture (80.9%), protein(6.8%), fat(0.6%), ash(2.1%) and alkalinity (+14.9). The amount of reducing sugars of sample A and other samples were 0.75% and 1.08∼1.4% in the initial fermentation stage, but decreased to 0.3 and 0.43∼0.50% in the later fermentation stage, respectively. The pH of sample A decreased from 5.17 to 4.72 during the initial fermentation. On sample B, C, D and E, pH's decreased rapidly during the initial fermentation, but they did not change much in the later fermentation stage. The pectin contents of all samples decreased during 2nd and 4th day of fermentation, then the change was slow. The amount of hemicellulose. cellulose and lignin in terms of the DNF and ADF were varied from 4 to 33%, but the contents of them did not greatly changed during the fermentation. The sensory evaluation showed that both B and C samples had the good score in sweety taste, roasted nutty taste, and the ease of swallowing measured as chewiness. From these results, the optimum soybean-leaf water kimchis can be prepared when 200g soybean-leaf, 1000$m\ell$ water, 15g garlic, 3% red pepper powder and 5 ∼0% wheat flour were fermented at 20$^{\circ}C$ for 2 days.

• The Journal of the Korea Contents Association
• /
• v.8 no.1
• /
• pp.27-38
• /
• 2008

Since the current mobile web market is already in its maturity, a research concerning the continued behavior of mobile Internet users should be carried out. The purpose of this research is to understand user's continued behaviors by theoretically constructing and empirically testing a continued model using real usage data. The model consists of four post-expectation factors (usefulness, ease of use, enjoyment, and perceived value) as well as user satisfaction, continuance intention, and the actual usage amount. To test the model, an on-line survey had been conducted, and we collected the actual usage data of survey respondents via the support of telecommunication companies. The study results indicate that post expectation variables were found to influence satisfaction, continuance intention, and actual usage amount of mobile web users. This paper ends with study limitations and implications on mobile web industry.

• Journal of the Korean Society of Costume
• /
• v.66 no.4
• /
• pp.146-165
• /
• 2016

The aim of the study is to propose ways to improve the break line fit of women's tailored collar vests by modifying the patternmaking process. The study explored the fit effects of experimental vests with a focus on 3 different breast sizes, A, B, and C cups. Women in the ages between 20 and 24 in South Korea were targeted. In order to carry out the objective, the study implemented separate girth measurements for the front and the back of the tailored collar vests, and also allocated different dart amounts on the lapel through the break line according to the different breast cup sizes. The study adopted a 5-point rating scale to perform evaluation of the different fit effects caused by the varying dart amounts given on the experimental vests' break lines. This evaluation was carried out by apparel pattern experts. The results derived from the study were as follows: first, the implementation of separate girth measurements provided originality to the study, as the application of different measurements for the waist back length and the neck shoulder point-to-breast point-to-waist line led to the front panels of the experimental vests having varying slack amounts. Second, break line dart was applied in three different amounts, 0.5, 1.0, and 1.5cm respectively according to A, B and C breast sizes, and as the dart amount increased, extra ease on the break lines was reduced. The dart was applied on the edge lines of the lapel and it was applied from a point which was 6cm above the breast point to the end of the princess line for all the breast cup sizes.