• 대한가정학회지
• /
• 제40권10호
• /
• pp.177-189
• /
• 2002

The purpose of this study was to develop a suitable jacket pattern for elderly women. The subjects were two women of the ages of 65-70, who had different bust size. To reflect the ready made pattern drafting systems, 4 industrial patterns were selected. After analyzing the problems of these patterns, a new jacket pattern was proposed. The results were as follows : 1) The amount of appropriate ease in fitted jacket for elderly women was about 10cm at the bust circumference, 10∼12cm at the hip circumference and the height of sleeve cap was AH/3+0.5cm. 2) Considering an enlargement of waist and abdomen, difference between front and back size was 2cm on the bust line, 6-8cm on the waist and hip line. 3) Because of the shape of concavity of back-waist, center back line in the pattern was folded by 0.5cm from center back waist toward side seam for manipulation. 4) The new jacket pattern was compared with the existing pattern through the wearing test by sensory evaluation. It showed that the fit and comfort of experimental pattern was superior to those of the existing pattern.

• 한국의류학회지
• /
• 제25권10호
• /
• pp.1754-1762
• /
• 2001

본 연구의 목적은 적합성과 기능성이 고려된 체형별 남성 상의 원형 패턴을 개발하는데 있다. 피험자는 인체계측자료와 측면체형 사진에 의해 선정하고, 체형은 굴신체형, 표준체형, 반신체형으로 분류하였다. 체형별 실험 원형 패턴의 평가를 위하여 기존원형을 선정하였으며, 연구 결과는 다음과 같다; 1. 착의평가 결과 표준체형은 대부분의 항목에서 적합하였으나, 굴신체형과 반신체형에서는 많은 차이가 있었다. 이러한 차이는 앞길이와 등길이 뿐만 아니라 여유량과 윗 가슴둘레에 서 나타난다. 앞품과 뒤품은 외관에 의해 많은 영향을 받으며, 증가된 옆품은 앞품과 뒤품의 부족분을 보충하는 역할을 하였다. 따라서 실험패턴은 기존패턴보다 각 체형에 더욱 적합하며, 체형 적합성과 동작기능성이 고려된 의복 제작을 위한 패턴설계는 인체의 구조와 동작연구에 의해 가능하였다. 2. 기본원형 패턴 설계를 위한 필요치수는 목뒤높이, 등길이, 앞길이, 윗 가슴둘레, 앞품과 뒤품이며, 체형분류의 기준은 윗 가슴둘레, 앞품, 뒤품, 앞길이, 등길이이다. 이와 같은 결과를 근거로 가슴둘레 선은 [(B/2+B/10), 뒤진동깊이는 [(B/10+목뒤높이/10)]로 설정하고, 앞내림은 1.5cm로 하였다.

• Journal of Power Electronics
• /
• 제17권4호
• /
• pp.1097-1108
• /
• 2017

Accurate calculation of the conduction and switching losses of a power electronic converter is required to achieve the efficiency of the converter. Such calculation is also useful for computing the junction temperature of the switches. A few models have been developed in the articles for calculating the switching energy losses during switching transitions for the given values of switched voltage and switched current. In this study, these models are comprehensively reviewed and investigated for the first time for ease of comparison among them. These models are used for calculating the average amount of switching power losses. However, some points and details should be considered in utilizing these models when switched current or switched voltage presents time-variant and alternative quantity. Therefore, an applicable technique is proposed in details to use these models under the above-mentioned conditions. A proper switching loss model and the presented technique are used to establish a new and fast method for obtaining the average switching power losses in any type of power electronic converters. The accuracy of the proposed method is evaluated by comprehensive simulation studies and experimental results.

• 한국의류학회지
• /
• 제42권6호
• /
• pp.943-961
• /
• 2018

This study was to develop an ergonomic Korean male military winter jackets (inner and outer) pattern. First, we developed a prototype pattern and sample jackets based on a previous investigation for fitness and motion suitability of Korean male military winter jackets and evaluated fitness and motion suitability by a wearing test. The evaluation results were positive with an over 3.0 (5.0 Likert scale) for both the inner and outer jacket. However, a relatively low score was shown in the sleeve length and collar front height at the inner jacket and shown in hem circumference, neck circumference, elbow and front neck at the outer jacket. Next, we developed the secondary pattern and sample jacket reflecting the prototype evaluation result and executed expert evaluation. The result showed that the ease amount was appropriate (except for the collar back height) and the appearance was good. Finally, we developed a final pattern that showed good results after evaluation at a Korean military army base.

• 복식문화연구
• /
• 제7권6호
• /
• pp.140-158
• /
• 1999

The purposes of this study are to examine the characters of the lower body shape in the middle aged women and to make slacks pattern on the base of four difference body shapes. The lower body shapes were classified into 4 types on the basis of their lateral view silhouettes. The slacks patterns were based on the lower body shape characters and resulted in followings. In “Type 1” of the right body shape with the standard protrusion of abdomen and hips, little difference from conventional patterns was seen in experiment pattern, in which the front waist girth was W/4+0.5㎝+0.5㎝+fold(2.5㎝) and the back waist girth W/4+0.5㎝-0.5㎝+dart(3.5㎝). The front hip girth was defined as H/4+2.0㎝+0.5㎝ and the back hip girth as H/4+2.0㎝-0.5㎝ due to its increased ease amount produced by abdominal fat deposition. In the experimental pattern of “Type 2” with prominent hips, the front and back differences of the waist girth and the hip girth and the hip girth were defined as 1.0㎝ and 2.0㎝ separately. Accordingly, the front waist girth was W/4+0.5㎝+1.0㎝+fold(2.0㎝), the back waist girth W/4+0.5㎝-0.1㎝+dart(6.5㎝), the front hip girth H/4+2.0㎝+1.0㎝ and the back hip girth H/4+2.0㎝-1.0㎝. In “Type 3” with the prominent abdomen and the flat hips, the front waist girth was set up as W/4+0.5㎝+0.5㎝+fold(4.5㎝) for the increased front fold amount and the back waist girth was W/4+0.5㎝+0.5㎝+dart(3.0㎝). The front hip girth was made as H/4+2.5㎝+0.5㎝ and the back hip girth H/4+2.5㎝-0.5㎝. In “Type 4” with prominent abdomen and hips, considered were ① the increased front fold amount due to the abdominal protrusion, ② the increased back dart amount and the decreased back dart length owing to the hips prominent and ③ the front and back differences of waist and hip girth for the lateral view silhouette. Therefore the front waist girth was defined as W/4+0.5㎝+2.0㎝+fold(5.0㎝), the back waist girth as W/4+0.5㎝-2.0㎝+dart(4.0㎝), the front hip girth as H/4+2.0㎝+1.0㎝ and the back hip girth as H/4+2.0㎝-1.0㎝. The sensory evaluation of appearance and comfort was appeared more suitable on the experiment pattern than on the conventional pattern.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1997년도 추계학술대회논문집
• /
• pp.40-55
• /
• 1997

The purpose of this study are to examine the characters of the lower half body shape in the middle aged women and to make slacks patttern on the base of four difference body shapes as follows. The lower half body shapes were classified into 4 types on the basis of their lateral view silhouette, whose characters were summarized as followings. (1) "Type 1" meant the right body shape with the standard protrusion of abdomen and hips. (2) "Type 2" showed the body shape with prominent hips, which had the flat abdominal silhouette and the greatly curved hips silhouette. (3) "Type 3" was the body shape with the prominent abdomen and the flat hips, in which the frontal view silhouette of the abdomen was greatly curved and the rear view silhouette of hips is less curved. (4) "Type 4" was characterized with prominent abdomen and hips. The slaks patterns were based on the lower half body shape characters and resulted in followings. (1) In the type 1, little difference from conventional patterns was seen in experiment pattern, in which the front waist girth was W/4{\times}0.5cm+0.5cm+fold(2.5cm) and the back waist girth W/4+0.5cm-0.5cm+dart(3.5cm). The front hip girth was defined as H/4+2.0cm+0.5cm and the back hip girth as H/4+2.0cm-0.5cm due to its increased ease amount produced by abdominal fat deposition. (2) In the type 2 experimental pattern, the front and back differences of the waist girth and the hip girth were defined as 1.0cm and 2.0cm separately. Accordingly, the front waist girth was W/4+0.5cm+ 1.0cm+fold(2.0cm), the back waist girth W/4+0.5cm-1.0cm+dart(6.5cm), the front hip girth H/4+2.0cm+1.0cm and the back hip girth H/4+2.0cm-1.0cm. (3) In type 3, the front waist girth was set up as W/4+0.5cm+0.5cm+fold (4.5cm) for the increased front fold amount and the back waist girth was W/4+0.5cm+0.5cm+dart(3.0cm). The front hip girth was made as H/4+2.5cm+0.5cm and the back hip girth H/4+2.5cm-0.5cm. (4) In type 4, considered were $\circled1$ the increased fornt fold amount due to the abdonimal protrusion, $\circled2$ the increased back dart amount and the decreased back dart length owing to the hips prominent and $\circled3$ the front and back differences of waist and hip girth for the lateral view silhouette. Therefore the front waist girth was defined as W/4+0.5cm+2.0cm+flod (5.0cm), the back waist girth as W/4+0.5cm-20.cm+dart(4.0cm), the front hip girth as H/4+2.0cm+1.0cm and the back hip girth as H/4+2.0cm-1.0cm. The sensory evaluation of appearance and comfort was appeared more suitable on the experiment pattern than on the conventional pattern.

• 지적과 국토정보
• /
• 제50권2호
• /
• pp.117-132
• /
• 2020

본 연구에서는 재조사사업이 완료된 세종시 사업지구의 민원 발생 사례를 중심으로 경계 결정방법과 조정금의 전반적인 실태를 분석·평가한 후 지적재조사 조정금 개선방안을 연구하였다. 지적재조사 사업의 조정금 개선방안은 크게 경계조정과 면적허용범위에 따른 개선방안과 제도적인 개선으로 구분하여 제시하였다. 세종시의 경계조정 현황을 분석한 결과 지적재조사 경계조정은 여러 방법으로 경계를 조정하고 있었으며, 이 중에서도 조정이 간단하고 필지를 정형화하는 방법과 도로를 신설하여 맹지 해소를 중심으로 조정이 많이 되고 있음을 알 수 있었다. 이와 같이 경계설정 시 현실경계나 합의경계보다는 소유자와 충분한 협의와 토지소유자의 개인적인 의사를 최대한 반영한 조정경계를 적극적으로 권장하여 효율적이고 합리적인 조정경계를 설정하는 것이 조정금에 관한 분쟁을 최소화할 것으로 판단되었다. 면적허용범위에 따른 개선방안으로는 지적재조사의 결과를 수치데이터로 정확하게 기록 보전하고, 조정금 산정시 공간정보관리법의 면적허용범위 규정 이내일 경우 조정금을 완화 또는 면제해주는 방안의 검토가 필요하다. 마지막으로 조정금과 관련하여 지적재조사 특별법에 토지 소유자에게 본인의 토지를 대상으로 저금리 장기 대출하는 방안을 마련해주어야 하며, 제삼자가 공정하고 객관적으로 가치판단에 의해 산정한 감정평가를 통한 조정금 산정이 필요할 것으로 판단되었다.

• 국토계획
• /
• 제54권3호
• /
• pp.27-48
• /
• 2019

The government has implemented housing welfare policy to ease low-income households' housing-cost burden and improve their quality of life. However, public housing residents and housing choice voucher recipients still show a high level of housing-cost burden. In this regard, this study aims to provide policy implications for current housing welfare policy by analyzing and comparing the factors that determine both subsidized and unsubsidized households' housing-cost burden. For the empirical analysis, this study uses "2017 Korea Housing Survey" and divides groups into public housing residents, housing choice voucher recipients, and unsubsidized low-income renters. We compared the level of housing-cost burden by employing t-test and chi-squared analyses and the factors affecting the housing-cost burden by employing logistic regression analyses between the three groups. According to the empirical analysis, the housing cost is the most burdensome for the housing choice voucher recipients group, followed by the unsubsidized low-income renters and public housing residents. In addition, the factors affecting housing-cost burden are different between the three groups. In case of public housing residents, housing characteristics usually affect the housing-cost burden. For housing choice voucher recipients and unsubsidized low-income renters, both housing and household characteristics influence the housing-cost burden. Looking at the detailed factors, except for the housing tenure and regional average rents that are common factors for all groups, the amount of deposit is an important factor for public housing residents, and household employment status is an important factor for both housing choice voucher recipients and unsubsidized low-income renters. The policy implications of this study are as follows: First, it is necessary to review the blind spot of the current housing welfare policy. Second, a comprehensive review of the housing choice voucher program is required. Third, it is necessary to make policy efforts to ease the level of housing-cost burden for renters. Fourth, a program is needed for those public housing residents who need a deposit support. Fifth, there should be further assistance with public housing for the poorest people.

• Asia Marketing Journal
• /
• 제14권1호
• /
• pp.25-51
• /
• 2012

정보기술의 활용이 마케팅 전략의 중요한 부분으로 부각되는 시장 환경에서 본 논문에서는 패스트푸드 레스토랑에서 주문시 Self Service Technology(SST)를 사용 할 때 기술준비도와 소비자 준비도에 따른 사용동기, 태도, 사용의도의 차이를 검증하고자 하였다. Parasuraman이 TRI를 개발한 이후 SST와 TRI를 접목한 연구가 이루어져 왔지만 여전히 부족한 실정이다. 소비자 준비도 역시 SST사용에 대한 소비자의 동기와 태도 및 의도와 직접적인 영향을 미칠 수 있지만 이에 대한 연구는 이루어지지 않았다. 이에 본 연구에서는 패스트푸드 레스토랑에서 터치스크린 SST를 도입함에 있어 소비자의 기술준비도와 소비자 준비도가 Dabholkar & Bagozzi(1994)가 제안한 SST 핵심태도모델에 미치는 영향을 고찰하였다. 이때 모든 소비자와 상황적 요인에 따른 차이를 파악하고자 자아의식, 상호작용욕구, 기술에 대한 두려움 등의 소비자특성과 지각된 대기시간, 지각된 과밀 등의 상황적 요인에 따른 조절 효과를 검증하였다. AMOS 18.0프로그램을 사용하여 구조방정식 모델로 분석하였고 연구 결과 기술준비도 중 낙관성은 사용용이성과 재미 동기에 유의한 영향을 미치는 것으로 나타났다. 혁신성은 사용용이성과 성과에 유의한 영향을 미치는 것으로 나타났다. 역할의 명확성, 능력 및 자아 효능감으로 구성된 소비자준비도는 사용용이성, 성과와 재미 등 모든 SST사용동기 요소에 기술준비도보다 강하고 유의한 영향을 미치는 것으로 나타났다. 마지막으로 SST 핵심태도모델 내의 SST 사용 동기, 사용 태도 및 사용의도 간의 관계에서 소비자 특성과 상황적 요인의 조절효과를 검증한 결과 지각된 과밀을 제외한 모든 변수들이 조절효과를 지니는 것으로 나타났다. 이러한 연구 결과를 바탕으로 터치스크린 SST를 도입하려는 기업에 실무적 제언을 하였다.

• 한국의류산업학회지
• /
• 제14권4호
• /
• pp.607-613
• /
• 2012

This study develops a Hanbok Jeogori pattern for middle-aged women with a 3D virtual-twin and virtual-garment simulation system. The including criteria for subjects in this study was a focus on women in their 50s, and a total of 345 females satisfying them were enrolled for 3D virtual model. Comparative Jeogori pattern, Baik & Choi's(2004) pattern, was selected for the development of Jeogori pattern. The results were: first, a new Jeogori pattern considerate of middle-aged women was developed. The basic numerical formula were: Front and back bust girth B/4+1.5, armhole depth B/4, sleeve width B/4, goedae width B/10-1.5 and git width 5.5. Second, according to the results of the new Jeogori patterns appearance evaluation, the new Jeogori pattern scored higher than the existing pattern in silhouette and ease amount, this confirmed that the new Jeogori pattern is appropriate for middle-aged women. Virtual models of production through data from 3D body scan, pattern draft, and virtual garment digital program were applied to a prototypic design method to enhance the fitness of ready-made Hanbok garments. This study serves as important basic data for ensuing studies that may utilize 3D Virtual Garment Simulation System with 2D patterns and for the future 3D Pattern Production Program development of Hanbok patterns.