• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 추계 학술논문 발표대회
• /
• pp.80-81
• /
• 2013

There is the increasing number of constructing soil or structure on the soft ground during public works. Usually cement or slag cement has been the traditional material for surface soil stabilization method. Recently, early strength development properties of hardening agent is required for driving abilities of execution equipment and shortening of the construction time. Therefore, the purpose of this study is to develop the early compressive strength hardening agent for surface soil stabilization. The study was confirmed performance and availability of hardening agent using early strength type cement and industrial by-product minerals through early strength development properties in accordance with water cement ratio, content of hardening agent for soft soil.

• 한국구조물진단유지관리공학회 논문집
• /
• 제18권1호
• /
• pp.84-92
• /
• 2014

본 연구는 조강시멘트와 경화촉진제를 사용하여 조기강도 발현의 메커니즘을 분석하는 것이 목적이다. 연구결과 경화촉진제는 시멘트와의 수화반응시 $Ca(OH)_2$의 촉진시키는 것을 TG/DTA 실험을 통하여 검정하였다. 압축강도 측정결과 경화촉진제의 사용량이 증가 할수록 초기압축강도가 증가하는 것을 알 수 있었다. 또한 미소수화열 측정결과 경화촉진제는 시멘트의 성분중 $C_3S$의 수화반응을 촉진시키는 것으로 나타났다. XRD분석결과 재령별 수화생성물을 확인할 수 있었으며 경화촉진제의 사용량이 증가할수록 수화물들의 피크점이 높게 나타나는 것을 알 수 있었다. SEM찰영을 한 결과 촉진제의 첨가량에 따라 $Ca(OH)_2$의 생성과 재령에 따라 C-S-H의 형상을 관찰할 수 있었다. 따라서 본 연구에서 사용된 경화촉진제는 초기강도발현 시키는 것에 대해 효과적인 것을 확인 할 수 있었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.266-267
• /
• 2014

In order to develop concrete generating compressive strength of 10MPa~15MPa aging for 6hours in the room temperature curing, Hardening accelerator containing Ca²⁺ mixed with rapid hardening portland cement containing C₃S in quantity. The result was that the more addictive contents of Hardening accelerator is, the more greatly early compressive strength was improved. That's because the composition of Ca(OH)₂ was mass-produced at early-ages.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 춘계 학술논문 발표대회
• /
• pp.56-58
• /
• 2013

In order to develop concrete generating compressive strength of 15MPa~30MPa aging for 6~12 hours in the room temperature curing, Hardening accelerator containing Ca²⁺ mixed with rapid hardening portland cement containing C₃S in quantity. The result was that the more addictive contents of Hardening accelerator is, the more greatly early compressive strength was improved. That s because the composition of Ca(OH)₂ was mass-produced at early-ages.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.413-416
• /
• 2005

The super early hardening cement is widely used for reducing construction period. But there are some problems with handling the cement because the loss of workability is so big to control. In this study, the fluidity properties of super early hardening cement paste was evaluated at early age of hydration by using gel-time determination method. 4 types of set controlling agent were selected and combinations of them were used for gel-time test. As a result, the gel-time of super early hardening cement paste was extended up to 20 minutes by using the combinations of several types set controlling agent.

• The Korean Journal of Ceramics
• /
• 제3권4호
• /
• pp.235-238
• /
• 1997

Basic properties of new cement pastes based on the system $CaO-Al_2O_3-P_O_5-H_2O$were studied Phosphoric acid solutions and calcium dialuminate clinkers synthesized by the hydration-burning method were used for liquid and powder components of the paste, respectively Variation in the compositions of the paste was achieved by changing the liquid/powder ratio and the concentration of phosphoric acid solution. The hardening rate of the paste was so largely affected by the amount of phosphoric acid that hardening was inhibited with the low-concentrated solution but was explosively accelerated with the high-concentrated solution. The phosphoric acid solutions of concentration of 45~50% and the liquid/powder ratio of 0.5~1.5 were favoured for the high early-strength cement paste with the reasonable hardening rate and high strength. The binding phase of hardened paste was the dense amorphous gel of the system $CaO-Al_2O_3-P_O_5-H_2O$. in which the unreacted calcium dialuminate grains were embeded.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 추계 학술논문 발표대회
• /
• pp.221-222
• /
• 2012

This study is to high early concrete development which reveals 14 MPa within 12 hours in order to reduce the mold time of dismantlement and not do the steam curing of the precast concrete product. About (40~50) min could shorten the final setting time if the coagulation test result cement amount 100 kg/m3 was increased. In the case of the compressive strength, it was exposed to be satisfied the target value with the cement amount 500 kg/m3 combination according to the hardening accelerator addition.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.135-136
• /
• 2014

In this study, the experimental study on the early age compressive strength of cement mortar using anti freezer and hardening accelerator at low temperature was conducted. For this study, all of materials for experiment were kept in a low temperature for 24 hours before mortar mixing. After mortar curing at low temperature, compressive strength was measured at the early ages. Furthermore, properties of hardened cement material was analysed using TG-DTA and MIP.

• 한국건축시공학회지
• /
• 제13권4호
• /
• pp.407-415
• /
• 2013

본 연구에서는 초 조강 콘크리트 개발에 앞서서 본 연구에서 사용되는 경화촉진제에 대한 역학적 성능평가 및 미세분석을 통하여 시멘트 페이스트 내에서 경화촉진제의 성능을 검증하는 것이 목적이다. 따라서 상온양생 하에 $C_3S$를 다량 함유한 조강시멘트와 경화촉진제를 사용하는 콘크리트 재료기술에 초점을 맞추어 실험적인 연구를 수행하였다. 연구결과 경화촉진제는 시멘트와의 수화반응시 Ca이온의 포화도를 높여 초기에 $Ca(OH)_2$를 생성 시키는 것을 시차열 분석법으로 검정 하였다. 또한 $C_3S$의 수화생성물이 모세관 공극을 채워 공극률 또한 빠른 시간내에 감소되는 것을 확인 할 수 있었으며 미소수화열측정시험기로 실험을 한 결과 경화촉진제를 1, 3% 혼입하였을 경우에는 조강시멘트에 비해 1차 피크점이 사라지기 전 이미 2차 피크점을 향해 수화속도가 증가하는 것을 알 수 있었다. 이는 촉진제를 첨가함에 따라 시멘트성분 중 $C_3S$의 수화속도를 촉진 시킨 결과로 판단 할 수 있다. 수화 생성물을 육안으로 관찰하기 위해서 SEM찰영을 한 결과 촉진제의 첨가량에 따라 $Ca(OH)_2$의 생성과 재령에 따라 C-S-H의 형상을 관찰할 수 있었다. 따라서 본 연구에서 사용된 경화촉진제는 초기강도발현 시키는 것에 대해 효과적인 것을 확인 할 수 있었다.

• Architectural research
• /
• 제14권4호
• /
• pp.153-161
• /
• 2012

This paper presents an integrated procedure to predict the temperature and moisture distributions in hardening concrete considering the effects of temperature and aging. The degree of hydration is employed as a fundamental parameter to evaluate hydro-thermal-mechanical properties of hardening concrete. The temperature history and temperature distribution in hardening concrete is evaluated by combining cement hydration model with three-dimensional finite element thermal analysis. On the other hand, the influences of both self-desiccation and moisture diffusion on variation of relative humidity are considered. The self-desiccation is evaluated by using a semi-empirical expression with desorption isotherm and degree of hydration. The moisture diffusivity is expressed as a function of degree of hydration and current relative humidity. The proposed procedure is verified with experimental results and can be used to evaluate the early-age crack of hardening concrete.