• Korean Journal of Ichthyology
• /
• v.4 no.1
• /
• pp.1-13
• /
• 1992

The gobiid fish, Luciogobius guttalus Gill has an anguilliform with some blackish and reddish brown color in life. It grows up to 90mm in total length. The specimens have been collected from several localities in the southern parts of Korea and Hokkaido, Japan. During the ebb tide, the fish was found in high level of intertidal zone exposed to the air among pebbles in the hollows and slopes of rocks. There are also some other small gobiid fishes comprising 3 species of relative gobies and 1 species of blennioid fish. A total of 5 egg masses were collected from the coast of Haeundae in April to May 1990. Each egg mass was deposited in one layer on the underside of a stone embedded in pebbles and guarded by the male parent. The eggs are club-shaped ranging from 2.71 to 2.80mm in long axis and from 0.65 to 0.74mm in short axis. The eggs were hatched in 98 hours after incubatied at the temperature varying from 19.5 to $25.5^{\circ}C$The newly hatched larvae were from 3.85 to 4.00mm in total length with 35~36 myomeres. In eleven days after hatching, total length reached 5.50mm. The part of the fin-fold of the future dorsal and anal fins became high. In sixteen days after hatching, the lavae averaged 6.20mm in total length and the caudal notochord flex at $45^{\circ}$. The larvae reached the juvenile stage in 48~50 days after hatching and attained 12.80~14.00mm in total length, and all fin-rays was formed. Ossification of the cranium took place at 5.50mm of mean total length in parasphenoid and basioccipital. Ossification of the visceral skeleton occurred in areas where active movements of bones are required, notalbly in the parts of feeding and respiration. Vertebrae began to develop from the anterior end to ossify posteriorly. Neural and haemal spines of vertebrae ossified always prior to the corresponding centra. When larvae reached to about 6.60mm in mean total length (17~18 days after hatching), jaw bones were more repidly ossified than vertebrae and cranium. Ossification of all bones nearly completed when the larvae reached to 13.40mm in mean total length (47~50 days after hatching).

• Journal of muscle and joint health
• /
• v.5 no.2
• /
• pp.238-252
• /
• 1998

Reumatic arthritis is a disease with joint pain being one of the key symptoms. The patient suffers from the pain, stiff sensation and edema due to the inflammation taking Place In one or more joints. Accompanying these problems are fatigue, unusual exhaustion, fever, tachycardia and weakness. Inaddition, joints are often deformed and muscles shrink along with the progress of edema, coupled with depression and psychological instability resulting from the loss of the mobile function and limitations on the daily life. Some patients become fed up with the long and hard flight with the disease and just give up, which aggravates the symptoms. Others come to the hospital only when the conditions have become serious. We need to prevent these and guide the patients in the right direction. Against this backdrop, this study aims to look into the relations between the knowledge on the part of the patients together with their feeling of self-efficacy and the compliance. The results are expected to help the patients improve their life, In addition to providing useful materials for setting up appropriate plan for nursing intervention. The study was conducted by distributing questionnaire to 88 patients selected from the out-patient department of a university hospital in Inchon, from April 6 to 27, 1998. The following tools were used the yardstick of self-efficacy, developed in 1997 by the Society for the Health of Rheumatism Patients, was used for measuring the levels of knowledge and the feeling of self-efficacy. The degree of compliance was measured by the data collected from documents in addition to the results of the analysis of the interviews with the patients. The reliability of the tools was confirmed. In the analysis, the general characteristics were expressed in figures and percentages. The levels of knowledge, feeling of self-efficacy, and compliance were expressed in the average values and standard deviations. The relations among the variables following the general characteristics were analysed by the t-test and one-way ANOVA. The Pearson correction coefficient was used for the analysis of factors. Multiple-loop analysis was used to identify the variables affecting the compliance. The following are the results of this study. 1. Among the 88 patients, 18 were men and the remaining 70 were women, with a ratio 1 : 3.87. Regarding the age groups, 23 were between 50 and 59 years old, with those between 50 and 69 accounting for 51.1% of the total. High school graduates or higher amounted to 58%. Religious patients was 67% or 59 persons. Fifty nine percent were unemployed, and 58.3% (49 persons) had two children or fewer. The period of suffering from rheumatism varied between 2 months and IS years, with 70% less than years. 2. The average figure In relation to the of knowledge was 17.63 points over 30 or 58. 76%, which means a medium level. 3. The average figure of the feeling of self-efficacy was 60.06 points. 4. The level of compliance was 3.26, which was above average. 5. The relation between the feeling of self-efficacy and compliance showed an "r" value of 0.37, which was significant. It means that the higher the feeling, the greater the compliance points. 6. The analysis of the knowledge level revealed that the difference is found only between the college graduates and junior-high graduates or lower. 7. The feeling of self-efficacy varied along with the age and education level. 8. The general characteristics of patients as discussed above did not show significant difference with the compliance. 9. Regarding the elements influencing the compliance, the number of children, period of suffering, income, age, feering of self-efficacy, knowledge, and compliance had 54% of significance. In conclusion, rheumatism victims can lead a better life if they are appropriately educated, based on efficient training program from the early days of the disease ; if they become able to manage themselves thanks to the training ; and if they are helped by a program focusing on the increase of the feeling of self-efficacy aimed at changing patient's behavior.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.5 no.2
• /
• pp.127-135
• /
• 1985

The effects of morphological development and environmental temperature on synthesis and accumulation behavior of cell-wall constituents were studied in maize cv. Blizzard and sorghum cv. Sioux and Pioneer 931 at Muenchen Technical University from 1979 to 1981. Various growth stages of maize and sorghum plants were grown on field and phytotron at 4 temperature regimes of 30/25, 25/20, 28/18 and 18/8 degree C and mid-summer sunlight over 13-hour days. The results are summarized as follow: 1. Cell-wall constituents in sorghum and maize plants were shown to have a great synthesis rates at early growth stage from growing point differentiation to final leaf visible. The highest concentration of cell wall contents were found at heading stage with 52-54% and 64-68% of neutral detergence fiber, and 30% and 45% of acid detergence fiber foe maize and sorghum, respectively. 2. The structural carbohydrates, cellulose and hemicellulose, were found as a main components of cell-wall constituents. Cellulose were mainly accumulated in stalks, while hemicellulose were an important cell wall components in leaves and panicle. 3. Synthesis rates of cell-wall constituents and non-strnctural carbohydrates were associated with increasing of temperature. Reserved carbohydrates such as fructosan, mono - and dissaccharose in plant were, however, declined when the temperature exceeded 30 deg C, during the accumulation of cellulose, hemicellulose and lignin were increased continuously. 4. Cell-wall constituents lowered digestibility and net energy accumulation in sorghum and maize plants. In a in vitro and in vivo trial, it was found a negative correlation between digestion dry matter and cell wall constituents, especially cellulose and lignin.

• Korean Journal of Ecology and Environment
• /
• v.52 no.4
• /
• pp.293-305
• /
• 2019

In this study we investigated the effect of a floating photovoltaic (FPV) system in Cheongpung Lake on water quality. The FPV with a tilt angle of 33° covered ca. 0.04% of surface area (97 ㎢) of Chungju Lake. The water qualities of the whole lake before and after installation of FPV were first compared. DO, BOD, TOC, and Chl-a of the whole lake were increased, while conductivity decreased after installation period at the significance level of 0.05. This change was probably due to the increased influx of nutrients by 40% resulting from increased precipitation during the same period. We also measured water quality parameters on May and Nov. 2017 at the FPV center (FPVC) and nearby control sites, and compared water quality. The result showed that the FPVC and nearby sites were not significantly different (p>0.05), demonstrating that the FPV does not cause a decline of water quality. The water temperature, light intensity, and phytoplankton community were also measured. The water temperature was not different between the sites, while the light intensity decreased to 27~50%. Despite reduced light intensity at FPVC, the phytoplankton standing crops and the number of species were not significantly different (p>0.05). However, in the early November samples, standing crops was significantly higher in FPVC than control with periphytic diatoms belonging to Aulacoseira genus being dominant. This may be due to the temporal water body behavior or local retention of current by FPV system. This study may provide a measure of future installation of a FPV system.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2005.09a
• /
• pp.125-153
• /
• 2005

It has been widely known that the seismic piezo-cone penetration test (SCPTU) is one of the most useful techniques for investigating the geotechnical characteristics including dynamic soil properties. As the practical applications in Korea, SCPTU was carried out at two sites in Busan and four sites in Incheon, which are mainly composed of alluvial or marine soil deposits. From the SCPTU waveform data obtained from the testing sites, the first arrival times of shear waves were and the corresponding time differences with depth were determined using the cross-over method, and the shear wave velocity profiles (VS) were derived based on the refracted ray path method based on Snell's law and similar to the trend of cone tip resistance (qt) profiles. In Incheon area, the testing depths of SCPTU were deeper than those of conventional down-hole seismic tests. Moreover, for the application of the conventional CPTU to earthquake engineering practices, the correlations between VS and CPTU data were deduced based on the SCPTU results. For the empirical evaluation of VS for all soils together with clays and sands which are classified unambiguously in this study by the soil behavior type classification Index (IC), the authors suggested the VS-CPTU data correlations expressed as a function of four parameters, qt, fs, $\sigma$, v0 and Bq, determined by multiple statistical regression modeling. Despite the incompatible strain levels of the down-hole seismic test during SCPTU and the conventional CPTU, it is shown that the VS-CPTU data correlations for all soils clays and sands suggested in this study is applicable to the preliminary estimation of VS for the Korean deposits and is more reliable than the previous correlations proposed by other researchers.

• Clinical and Experimental Pediatrics
• /
• v.49 no.5
• /
• pp.507-512
• /
• 2006

Purpose : Early detection and intervention of hearing impairment is believed to improve speech and language development and behavior of children. The aim of this preliminary study was to determine the prevalence of hearing impairments, and to identify the association of risk factors relating to refer response in high risk neonates who were screened using distortion product otoacoustic emissions (DPOAE). Methods : The subjects included 871 neonates who were admitted to the neonatal intensive care unit of the Pediatric Department in Soonchunhyang University Bucheon Hospital from May, 2001 to December, 2004. They were screened using DPOAE. Based on DPOAE, we divided the neonates in two groups : 'Pass' and 'Refer'. The differences in risk factors between the pass group and the refer group were analyzed. Results : The incidence of the refer group was 12.1 percent(106 out of 871). The bilateral refer rate was 5.4 percent(47 out of 871). And the unilateral refer rate was 6.7 percent(59 out of 871). Gender, birth place, family history of hearing loss, small/large for gestational age, obstetrical factor, hyperbilirubinemia and use of gentamicin were not statistically related to the refer rate. Statistically related to refer rate were birth weight, resuscitated neonates, Apgar score, craniofacial anomaly, mechanical ventilator application, sepsis, using of vancomycin(P<0.05). The prevalence of hearing impairment (${\geq}60dB$) in this study was 2 percent(18 out of 871). Conclusion : This study showed a higher prevalence of hearing impairment in high-risk neonates. Thus neonatal hearing screening should be carried out in high-risk neonates.

• Archives of design research
• /
• v.18 no.2 s.60
• /
• pp.243-254
• /
• 2005

Great Britain and the United States and Finland are having an interest in long policy subject about child design education through early design education. And they approaches and practices it systematically. The research about the design learning program instance of advanced nation of primary school's design education for various objective is necessary for use with the fundamental reference data for an elementary design education. And so, This research presented the program instance investigation and analysis result of British primary school's design education. U.K is teaching an primary design education from two subjects of Art & Design and Design and Technology which is a legal subject with national curriculum. The analysis result of design relation unit learning program of two subjects is: Design relation unit learning programs of 'Design and Technology' subject's 20 unit which except 4 food relation unit is largely scientific engineering contents that include utility function contents in part. The reason is as behavior styles based on Design process solve problems scientifically & rationally. Design relation 6 units in subject of Art & Design which except the units which relates with the pure fine arts and architecture in 19 units is aesthetic-symbolic and utility-functional contents largely. And so, the result was analyzed about relation of scientific-engineering content of 'Arts & Design' subject is insufficient comparing with 'Design and Technology' subject Specially, I think that the design relation's unit learning program instances of 'Design and Technology' subject of the British primary school which have been presented by this research paper is a possibility becoming one reference model for a program development. And so I expects that this research could be applied in the program development for the primary design education of primary teacher & education agency.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.5-5
• /
• 2011

The research and development of hybrid electric vehicle (HEV), plug-in hybrid electric vehicle (PHEV) and electric vehicle (EV) are intensified due to the energy crisis and environmental concerns. In order to meet the challenging requirements of powering HEV, PHEV and EV, the current lithium battery technology needs to be significantly improved in terms of the cost, safety, power and energy density, as well as the calendar and cycle life. One new technology being developed is the utilization of composite cathode by mixing two different types of insertion compounds [e.g., spinel $LiMn_2O_4$ and layered $LiMO_2$ (M=Ni, Co, and Mn)]. Recently, some studies on mixing two different types of cathode materials to make a composite cathode have been reported, which were aimed at reducing cost and improving self-discharge. Numata et al. reported that when stored in a sealed can together with electrolyte at $80^{\circ}C$ for 10 days, the concentrations of both HF and $Mn^{2+}$ were lower in the can containing $LiMn_2O_4$ blended with $LiNi_{0.8}Co_{0.2}O_2$ than that containing $LiMn_2O_4$ only. That reports clearly showed that this blending technique can prevent the decline in capacity caused by cycling or storage at elevated temperatures. However, not much work has been reported on the charge-discharge characteristics and related structural phase transitions for these composite cathodes. In this presentation, we will report our in situ x-ray diffraction studies on this mixed composite cathode material during charge-discharge cycling. The mixed cathodes were incorporated into in situ XRD cells with a Li foil anode, a Celgard separator, and a 1M $LiPF_6$ electrolyte in a 1 : 1 EC : DMC solvent (LP 30 from EM Industries, Inc.). For in situ XRD cell, Mylar windows were used as has been described in detail elsewhere. All of these in situ XRD spectra were collected on beam line X18A at National Synchrotron Light Source (NSLS) at Brookhaven National Laboratory using two different detectors. One is a conventional scintillation detector with data collection at 0.02 degree in two theta angle for each step. The other is a wide angle position sensitive detector (PSD). The wavelengths used were 1.1950 ${\AA}$ for the scintillation detector and 0.9999 A for the PSD. The newly installed PSD at beam line X18A of NSLS can collect XRD patterns as short as a few minutes covering $90^{\circ}$ of two theta angles simultaneously with good signal to noise ratio. It significantly reduced the data collection time for each scan, giving us a great advantage in studying the phase transition in real time. The two theta angles of all the XRD spectra presented in this paper have been recalculated and converted to corresponding angles for ${\lambda}=1.54\;{\AA}$, which is the wavelength of conventional x-ray tube source with Cu-$k{\alpha}$ radiation, for easy comparison with data in other literatures. The structural changes of the composite cathode made by mixing spinel $LiMn_2O_4$ and layered $Li-Ni_{1/3}Co_{1/3}Mn_{1/3}O_2$ in 1 : 1 wt% in both Li-half and Li-ion cells during charge/discharge are studied by in situ XRD. During the first charge up to ~5.2 V vs. $Li/Li^+$, the in situ XRD spectra for the composite cathode in the Li-half cell track the structural changes of each component. At the early stage of charge, the lithium extraction takes place in the $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component only. When the cell voltage reaches at ~4.0 V vs. $Li/Li^+$, lithium extraction from the spinel $LiMn_2O_4$ component starts and becomes the major contributor for the cell capacity due to the higher rate capability of $LiMn_2O_4$. When the voltage passed 4.3 V, the major structural changes are from the $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component, while the $LiMn_2O_4$ component is almost unchanged. In the Li-ion cell using a MCMB anode and a composite cathode cycled between 2.5 V and 4.2 V, the structural changes are dominated by the spinel $LiMn_2O_4$ component, with much less changes in the layered $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component, comparing with the Li-half cell results. These results give us valuable information about the structural changes relating to the contributions of each individual component to the cell capacity at certain charge/discharge state, which are helpful in designing and optimizing the composite cathode using spinel- and layered-type materials for Li-ion battery research. More detailed discussion will be presented at the meeting.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.1
• /
• pp.75-88
• /
• 2005

Ameloblastoma is the most commonly occurring odontogenic tumor in oral cavity. Although most are benign epithelial neoplasm, they are generally considered to be locally aggressive and destructive, exhibiting a high rate of recurrence. The biological behavior of this neoplasm is a slowly growing, locally invasive tumor without metastasis, therefore malignant neoplasm, changed its histological appearance to carcinoma or showed distant metastasis, is only defined clinically. In this study, we identified the differentially expressed genes(DEGs) in stages under benign or malignant ameloblastoma compared with normal patient using ordered differential display(ODD) reverse transcription(RT)-PCR and $GeneFishing^{TM}$ technology. ODD RT-PCR is rather effective when the investigation of samples containing very small amounts of total RNA must be accomplished. ODD RT-PCR used the means of amplification with anchored T-primer and adaptor specific primer. bearing definite two bases at their 3' ends and so this method could display differential 3'-expressed sequence taqs(ESTs) patterns without using full-length cDNAs. Compared with standard differential display, ODD RT-PCR is more simple and have enough sensitivity to search for molecular markers by comparing gene expression profiles, However, this method required much effort and skill to perform. $GeneFishing^{TM}$ modified from DD-PCR is an improved method for detecting differentially expressed genes in two or more related samples. This two step RT-PCR method uses a constant reverse primer(anchor ACP-T) to prime the RT reaction and arbitrary primer pairs(annealing control primers, ACPs) during PCR. Because of high annealing specificity of ACPs than ODD RT-PCR, the application of $GeneFishing^{TM}$ to DEG discovery generates reproducible, authentic, and long(100bp to 2kb) PCR products that are detectable on agarose gels. Consequently, various DEGs observed differential expression levels on agarose gels were isolated from normal, benign, and malignant tissues using these methods. The expression patterns of the some isolated DEGs through ODD RT-PCR and $GeneFishing^{TM}$ were confirmed by Northern blot analysis and RT-PCR. The results showed that these identified DEGs were implicated in ameloblastoma neoplasm processes. Therefore, the identified DEGs will be further studied in order to be applied in candidate selection for marker as an early diagnosis during ameloblastoma neoplasm processes.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.4
• /
• pp.750-756
• /
• 2008

Supernumerary teeth are frequently found in the anterior portion of the maxilla and develop as a result of abnormal proliferation of the dental lamina during tooth germ formation, caused by genetic or environmental factors. They may result in various complications, such as eruption interference, displacement, rotation of adjacent teeth, diastema, eruption into the nasal cavity, and development of dentigerous cyst. The optimal time for surgical extraction of supernumerary teeth has been a controversial issue. Someone prefer early surgical extraction because supernumerary teeth can cause eruption interference and displacement of adjacent teeth, eventually altering occlusion. Others prefer to delay surgical extraction until $8{\sim}10$ years of age in consideration of root maturation of the adjacent teeth and also patient's behavior. When surgical extraction of supernumerary teeth is postponed, there is possibility that impacted supernumerary teeth in the inverted or horizontal position move toward the nasal cavity, hard palate, or premolar area. When such intraosseous tooth migration is combined with the vertical growth of the maxilla, surgical approach becomes even harder. Therefore, possibility of intraosseous tooth migration should be considered as an important factor when deciding appropriate time for surgical extraction. We are presenting cases of mesiodens which showed intraosseous migration during $6{\sim}7$ years of follow-up period since the first diagnosis had been made at the $2{\sim}3$ years of age.