• Korean Security Journal
• /
• no.10
• /
• pp.53-77
• /
• 2005

This thesis analyzes the effectiveness of master's transformational and transactional leadership on organizational commitment as well as job satisfaction of private security, scrutinizes the difference in master's leadership according to social-demographic group. The sum of this thesis is as follows. To begin with, analyzed the difference of leadership style according to social-demographic characteristics of private security, it showed that monthly income is over 2.5 million won as well as people over 30 years old have higher transformational leadership than the others. That is, the older people's age is and the more someone gains his living, the higher he esteems and trusts his master who has charisma, personal concern and shows intellectual stimulus. And examined thoroughly the difference of organizational commitment as well as job satisfaction in accordance with social-demographic characteristics of private security, people who are 20-25 years old, are college graduates and employees who have worked for 2-3 years do well calculational commitment. It means that the younger he is and the lower academic background is, the higher calculational commitment is by the profit and loss which affects them. Secondly, inquired into consequence of leadership style on job satisfaction. Leadership of intellectual stimulus has negative effect on job satisfaction, whereas it has positive effect on conditional compensation. Exactly, if the master exhibits leadership that stimulate to improve an initiative, it reduces the job satisfaction. On the contrary, for the reason that his master indicates leadership that accompanies conditional compensation, job satisfaction tends to increase. Finally, judged from the effects of leadership style on organizational commitment, the charisma, the lower factor of transformational leadership affects to emotional commitment positively and then, it shows that employees tend to become attached to the organization and have a sense of oneness with it, if their master is able to show charismatic leadership. In conclusion, the private security companies pursue employees whose school career and payment is lower because of incidence in labor expense related with the profit and loss. Owing to it, employees are not satisfied with their job much. And also there is the change in increasing rate of job satisfaction according to business performance of the conditional compensation, i.e. a consideration, a promotion, etc., and the calculational commitment. Therefore, the university should try to focus on the researches for cultivate more professional manpower for business, the companies must try to make better deal, offer welfare for their employees to develop of the private security industry, to rise the job satisfaction of private security. And then, investigation to find private security's own level ought to be done by organic industry-academic cooperation of university and industries.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.1
• /
• pp.25-35
• /
• 2018

This study presents microstructural characteristics and strength properties of alkali-activated kaolin(K)-fly ash(FA) blends binders. The compressive strength, X-ray diffraction(XRD), thermogravimetric(TG) analysis and SEM/EDS were measured for hardened samples. The results were shown that all the samples had developed the compressive strength over time, regardless of replacement levels of K. It was found that when the amount of K increased, the strengths of samples decreased. In XRD result, no new crystalline phases were observed in all the hardened samples other than the crystalline components of raw FA and K, whereas TG analysis showed that N-A-S-H gel was formed as a reaction product in all the samples. Samples did not have the typical microstructure of dense, and there is little significant difference between the microstructures of the samples despite the differences in the strength testing results with replacement ratios of K. This study showed that the strength of sample was larger for lower Si/Al ratio of reaction product formed in sample. According to the correlation between Si/Al ratio and strength in this study, it is expected that if a chemical additive is used for lowering the Si/Al ratio of reaction product(i.e., increasing the $Al_2O_3$ solubility) in alkali-activated K-FA blends binders, strength improvement in K-FA blends binders could be achieved.

• Journal of Wetlands Research
• /
• v.22 no.2
• /
• pp.145-152
• /
• 2020

Highways are characterized by high non-point pollutant emissions due to high traffic volumes and sections that cause abrupt change in driving speed (i.e. rest stations, ticketing office, etc.). Most highways in Korea were constructed with layers that do not allow adequate infiltration. Moreover, non-point pollution reduction facilities were not commonly installed on domestic highways. This study was conducted to evaluate a facility treating highway runoff and develop a cost-effective design for infiltration facilities by using soil amendment techniques. Performing soil amendment increased the hydraulic retention time (HRT) and infiltration rate in the facility by approximately 30% and 20%, respectively. The facility's efficiency of removing non-point pollutants (Total Suspend Soiled (TSS), Chemical Oxygen Demand(COD), Biological Oxygen Demand(BOD), Total Nitrogen (TN) and Total Phosphorus, (TP) were also increased by 20%. Performing soil amendment on areas with low permeability can increase the infiltration rates by improving the storage volume capacity, HRT, and infiltration area. The application of infiltration facilities on areas with low permeability should comply with the guidelines presented in the Ministry of Environment's Standards for installation of non-point pollution reduction facilities. However, soil amendment may be necessary if the soil infiltration rate is less than 13 mm/hr.

• Korean Journal of Agricultural Science
• /
• v.35 no.2
• /
• pp.183-191
• /
• 2008

In order to make a functional jam containing garlic, sugar, acid and pectin were mixed with garlic and concentrated by heating the mixture under atmosphere or vacuum conditions. And changes of some physico-chemical properties of the garlic jam(i.e., color, textural properties, vitamin C) were investigated during storage at $30^{\circ}C$. It was found that lightness(L) was higher in sample of vacuum concentration than that in atmosphere concentration and redness(a) and yellowness(b) were higher in sample of atmosphere concentration. During the storage lightness was found to decrease for all samples with more drastic decrease in sample of atmosphere concentration where browning was more severely observed after 8 weeks of storage. In terms of textural properties, hardness, chewiness and gumminess were higher in sample of atmosphere concentration than that in vacuum concentration. And springiness and cohesiveness were higher in sample of vacuum concentration. Although sensory score for garlic jam found to be lower than that for the existing strawberry jam, the present garlic jam might have high marketability if considering its physiological value.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.2
• /
• pp.133-140
• /
• 2017

In this paper, we has proposed an automatic vehicle monitoring system based on computer vision technology. The real-time display system has displayed a system that can be performed in automatic monitoring and control while meeting the essential requirements of ITS. Another advantage has that for a powerful vehicle tracking, the main obstacle handing system, which has the shadow tracking of moving objects. In order to obtain all kinds of information from the tracked vehicle image, the vehicle must be clearly displayed on the surveillance screen. Over time, it's necessary to precisely control the vehicle, and a three-dimensional model-based approach has been also necessary. In general, each type of vehicle has represented by the skeleton of the object or wire frame model, and the trajectory of the vehicle can be measured with high precision in a 3D-based manner even if the system has not running in real time. In this paper, we has applied on segmentation method to vehicle, background, and shadow. The validity of the low level vehicle control tracker was also detected through speed tracking of the speeding car. In conclusion, we intended to improve the improved tracking method in the tracking control system and to develop the highway monitoring and control system.

• Korean Journal of Remote Sensing
• /
• v.36 no.6_2
• /
• pp.1615-1627
• /
• 2020

The purpose of this study is to compare and analyze the performance of KOMPSAT-3 Digital Surface Model (DSM) made in overseas testbed area. To that end, we collected the KOMPSAT-3 in-track stereo image taken in San Francisco, the U.S. The stereo geometry elements (B/H, converse angle, etc.) of the stereo image taken were all found to be in the stable range. By applying precise sensor modeling using Ground Control Point (GCP) and DSM automatic generation technique, DSM with 1 m resolution was produced. Reference materials for evaluation and calibration are ground points with accuracy within 0.01 m from Compass Data Inc., 1 m resolution Elevation 1-DSM produced by Airbus. The precision sensor modeling accuracy of KOMPSAT-3 was within 0.5 m (RMSE) in horizontal and vertical directions. When the difference map was written between the generated DSM and the reference DSM, the mean and standard deviation were 0.61 m and 5.25 m respectively, but in some areas, they showed a large difference of more than 100 m. These areas appeared mainly in closed areas where high-rise buildings were concentrated. If KOMPSAT-3 tri-stereo images are used and various post-processing techniques are developed, it will be possible to produce DSM with more improved quality.

• The KIPS Transactions:PartD
• /
• v.19D no.2
• /
• pp.161-186
• /
• 2012

Recently, the flash memory consistently increases the storage capacity while the price of the memory is being cheap. This makes the mass storage SSD(Solid State Drive) popular. The flash memory, however, has a lot of defects. In order that these defects should be complimented, it is needed to use the FTL(Flash Translation Layer) as a special layer. To operate restrictions of the hardware efficiently, the FTL that is essential to work plays a role of transferring from the logical sector number of file systems to the physical sector number of the flash memory. Especially, the poor performance is attributed to Erase-Before-Write among the flash memory's restrictions, and even if there are lots of studies based on the log block, a few problems still exists in order for the mass storage flash memory to be operated. If the FAST based on Log Block-Based Flash often is generated in the wide locality causing the random writing, the merge operation will be occur as the sectors is not used in the data block. In other words, the block thrashing which is not effective occurs and then, the flash memory's performance get worse. If the log-block makes the overwriting caused, the log-block is executed like a cache and this technique contributes to developing the flash memory performance improvement. This study for the improvement of the random writing demonstrates that the log block is operated like not only the cache but also the entire flash memory so that the merge operation and the erase operation are diminished as there are a distinct mapping table called as the offset mapping table for the operation. The new FTL is to be defined as the XAST(extensively-Associative Sector Translation). The XAST manages the offset mapping table with efficiency based on the spatial locality and temporal locality.

• The Korean Journal of Financial Management
• /
• v.22 no.2
• /
• pp.71-89
• /
• 2005

The purpose of this research is to examine X-efficiency of Korean local credit unions in 2001 by employing the stochastic frontier approach. This study uses the intermediation approach in order to define outputs and inputs of the credit unions. We define the outputs as the amounts of loans, and securities. The inputs are labor, deposit and physical capital. The price of labor is estimated by dividing the total wages by the number of employees. The price of deposit equals total interest divided by total deposit, and the price of physical capital is also computed to divide the total sales and administrative expenses by the physical capital. By the result of this study, the average efficiency score is 0.81. This fact indicates that credit unions can reduce their inputs by 19% for the given outputs. If results are arranged into quartiles based on the efficiency, inefficiency of top 25% credit unions is below 9%, and half of them is over 17%. In addition, e result shows that the efficiency is significantly influenced by region and size even if credit unions in Seoul and Daegu showed little difference in efficiency by size. Generally, medium size credit unions are more efficient than large size.

• Journal of Korea Trade
• /
• v.24 no.4
• /
• pp.49-70
• /
• 2020

Purpose - The UCP is recognized as the governing law for L/C transactions, but it covers only the general details of the transaction and does not cover all complex practices. In view of this limitation, this paper examines a negotiation transaction which is most actively utilized in L/C transactions via a thorough review of the UCP provisions, analyzes the problems of the negotiation clause in the UCP, and suggests appropriate countermeasures to deal with unnecessary litigation costs. By doing so, the parties involved in the negotiation transaction would be able to avoid financial costs such as having to pay for lawsuits. Design/methodology - The present study first differentiates the general types of L/Cs (e.g., sight payment L/C, deferred payment L/C, acceptance L/C, and negotiation L/C), explains and the Article 2 and Article 12(b) of the UCP 600 where the term 'negotiation' is used, digs into the drawbacks of 'negotiation' occurring under the UCP 600, and discusses solutions to the problems found by analyzing the drawbacks descriptively. Findings - After a review of the UCP provisions on negotiation in detail, several possible problems which may occur in practice were discovered. First, as the UCP stipulates, the negotiating bank will want to delay payment to the maximum extent possible and make payment on the banking day on which the issuing bank reimburses the amount. This may lead the beneficiary towards bankruptcy or put it in financial crisis. Second, when a fraudulent transaction occurs, the negotiating bank can neither request the issuing bank to reimburse nor can it exercise its recourse right against the beneficiary because it has obtained all the rights of the beneficiary by purchasing the documents. Third, there is a practice in which the beneficiary sells the documents to its transaction bank which is not the nominated bank if the nominated bank specified in the credit is located in a third country or the exporter has no relationship with the nominated bank in the credit. In this case, whether to accept this and reimburse the non-nominated negotiating bank entirely depends on the issuing bank's decision even though such practice frequently occurs in Korea. Originality/value - There has been little research effort pertaining to negotiation transactions in detail even though negotiation L/C transactions account for around 70% in world trade notwithstanding deferred payment L/Cs and acceptance L/Cs that are also negotiated in practice. Thus, if the negotiations clause under the UCP 600 provisions were reviewed and the drawbacks of the negotiation transactions most actively used in L/C transactions were identified and examined, specific countermeasures could ultimately help smoothen the operation of L/C transactions and prevent financial losses.

• Korean Journal of Radiology
• /
• v.24 no.8
• /
• pp.729-738
• /
• 2023

Objective: When multiple surveillance mammograms are performed within an annual interval, the current guidance for oneyear follow-up to determine breast cancer status results in shared follow-up periods in which a single breast cancer diagnosis can be attributed to multiple preceding examinations, posing a challenge for standardized performance assessment. We assessed the impact of using follow-up periods that eliminate the artifactual inflation of second breast cancer diagnoses. Materials and Methods: We evaluated surveillance mammograms from 2007-2016 in women with treated breast cancer linked with tumor registry and pathology outcomes. Second breast cancers included ductal carcinoma in situ or invasive breast cancer diagnosed during one-year follow-up. The cancer detection rate, interval cancer rate, sensitivity, and specificity were compared using different follow-up periods: standard one-year follow-up per the American College of Radiology versus follow-up that was shortened at the next surveillance mammogram if less than one year (truncated follow-up). Performance measures were calculated overall and by indication (screening, evaluation for breast problem, and short interval follow-up). Results: Of 117971 surveillance mammograms, 20% (n = 23533) were followed by another surveillance mammogram within one year. Standard follow-up identified 1597 mammograms that were associated with second breast cancers. With truncated follow-up, the breast cancer status of 179 mammograms (11.2%) was revised, resulting in 1418 mammograms associated with unique second breast cancers. The interval cancer rate decreased with truncated versus standard follow-up (3.6 versus 4.9 per 1000 mammograms, respectively), with a difference (95% confidence interval [CI]) of -1.3 (-1.6, -1.1). The overall sensitivity increased to 70.4% from 63.7%, for the truncated versus standard follow-up, with a difference (95% CI) of 6.6% (5.6%, 7.7%). The specificity remained stable at 98.1%. Conclusion: Truncated follow-up, if less than one year to the next surveillance mammogram, enabled second breast cancers to be associated with a single preceding mammogram and resulted in more accurate estimates of diagnostic performance for national benchmarks.