• The Journal of the Acoustical Society of Korea
• /
• v.16 no.2E
• /
• pp.21-26
• /
• 1997

We propose to use transverse waves instead of longitudinal waves in a scanning tomographic acoustic microscope (STAM) and new type of multiple-transducer with the functions of muliple-angle and multiple-frequency tomography. Proposed multiple-transducer scheme has three insonification angles and three resonance frequencies in order to operate in the transverse wave mode and multiple-angle and multiple frequency tomography for the STAM. In order to evaluate the performance of proposed transducer scheme we have simulated tomographic reconstruction with back-and-forth propagation(BFP) algorithm. Simulation results showed proposed multiple-transducer scheme is capable of obtaining good resolution with transverse wave mode and multiple-frequency tomography. It is also showed that proposed scheme is an efficient rotation scheme by proportion to the number of projections.

• Smart Structures and Systems
• /
• v.13 no.4
• /
• pp.517-546
• /
• 2014

This paper proposes a refined electro-mechanical beam formulation. Lagrange-type polynomials are used to interpolate the unknowns over the beam cross section. Three- (L3), four- (L4), and nine-point(L9) polynomials are considered which lead to linear, bi-linear, and quadratic displacement field approximations over the beam cross-section. Finite elements are obtained by employing the principle of virtual displacements in conjunction with the Carrera Unified Formulation (CUF). The finite element matrices and vectors are expressed in terms of fundamental nuclei whose forms do not depend on the assumptions made. Additional refined beam models are implemented by introducing further discretizations, over the beam cross-section. Some assessments from bibliography have been solved in order to validate the electro-mechanical formulation. The investigations conducted show that the present formulation is able to detect the electro-mechanical interaction.

• Korean Journal of Rural Living Science
• /
• v.7 no.2
• /
• pp.129-138
• /
• 1996

This study attempted to explore the characteristics of conflicts in marriage life, and to analyze their impacts on global marital satisfaction perceived by wives in rural areas. The survey data was gathered from 151 rural wives. The degrees of three types of conflicts were shown to be low. while in terms of the degree of seriousness, environmental, interpersonal and intrapersonal are in descending order. Especially the degree of the environmental types of conflicts were significantly different across the family life cycle. In order to analyze the relationships between the types of conflicts and the marital satisfaction, logistic regression were performed. It was found that the environmental type of conflict was negatively associated with the likelihood of satisfaction in the marriage life. On the other hand, one of the control variables, the degree of satisfaction on the husband's job, i.e., farming, was positively associated with it.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1993.11a
• /
• pp.31-36
• /
• 1993

Three different methods were employed to measure the degree of aerial oxidation in coal and the resulting oxidation/weathering indices were applied to obtain kinetic parameters of aerial oxidation processes, The index (i.e., slurry pH, Free Swelling Index, weight gain) values were subjected to kinetic analysis based on power-law Arrhenius type reaction model. The results show that activation energy of the aerial oxidation in 20-29$0^{\circ}C$ is in the range of 12-16 ㎉/㏖ and the agreement among three techniques is remarkable. The first order kinetic model is suitable in describing low temperature aerial oxidation process, except in the FSI case where the zero order expression is the best one.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.11
• /
• pp.3896-3915
• /
• 2014

The Reverse k Nearest Neighbor (RkNN) query is valuable for finding objects influenced by a specific object and is widely used in both scientific and commercial systems. However, the influence level of each object is unknown, information that is critical for some applications (e.g. target marketing). In this paper, we propose a new query type, Ordered Reverse k Nearest Neighbor (ORkNN), and make efforts to adapt it in an on-demand scenario. An Order-k Voronoi diagram based approach is used to answer ORkNN queries. In particular, for different values of k, we pre-construct only one Voronoi diagram. Algorithms on both the server and the clients are presented. We also present experimental results that suggest our proposed algorithms may have practical applications.

• Journal of Pharmaceutical Investigation
• /
• v.21 no.4
• /
• pp.237-245
• /
• 1991

Matrix type silicone rubber devices were designed for long-term implantable drug delivery system. Release controlling agents (RCA), i.e., polypropylene glycol, polyethylene glycol, were employed to control drug release from the devices. The release rate of drug from RCA dispersed silicone matrices was mainly dependent on hydrophilicity-hydrophobicity of drug and RCA. In the case of hydrophilic drug, the release from the RCA dispersed matrix was regulated by swelling kinetics. Especially when the relatively hydrophobic polypropylene glycol was used, swelling control mechanism induced zero-order release kinetics. Whereas, the release of hydrophobic drug was resulted from partition mechanism. The effect of RCA was to increase drug diffusivity.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.5
• /
• pp.1537-1543
• /
• 2014

This paper presents a new DC/AC multilevel converter. This configuration uses single DC sources. The proposed converter has two stages. The first stage is a DC/DC converter that can produce several DC-links in the output. The DC/DC converter is one type of boost converter and uses single inductor. The second stage is a multilevel inverter with several capacitor links. In this paper, one single input multi output DC-DC converter is used in order to voltage balancing on multilevel converter. In addition, as compare to traditional multilevel inverter, presented DC/AC multilevel converter has less on-state voltage drop and conduction losses. Finally, in order to verify the theoretical issues, simulation and experimental results are presented.

• Geomechanics and Engineering
• /
• v.19 no.4
• /
• pp.295-305
• /
• 2019

The present paper is concerned with the investigation of disturbances in orthotropic thermoelastic medium by using fractional order heat conduction equation with three phase lags due to thermomechanical sources. Laplace and Fourier transform techniques are used to solve the problem. The expressions for displacement components, stress components and temperature change are derived in transformed domain and further in physical domain using numerical inversion techniques. The effect of fractional parameter based on its conductivity i.e., ($0<{\alpha}<1$ for weak, ${\alpha}=1$ for normal, $1<{\alpha}{\leq}2$ for strong conductivity) is depicted graphically on various components.

• Bulletin of the Korean Mathematical Society
• /
• v.59 no.4
• /
• pp.827-841
• /
• 2022

In this paper, we study the uniqueness of two finite order transcendental meromorphic solutions f(z) and g(z) of the following complex difference equation A₁(z)f(z + 1) + A₀(z)f(z) = F(z)e^𝛼(z) when they share 0, ∞ CM, where A₁(z), A₀(z), F(z) are non-zero polynomials, 𝛼(z) is a polynomial. Our result generalizes and complements some known results given recently by Cui and Chen, Li and Chen. Examples for the precision of our result are also supplied.

• Journal of Sericultural and Entomological Science
• /
• v.17 no.1
• /
• pp.1-26
• /
• 1975

These studies were attempted to find out the optimum silk reeling system by use of automatic silk reeling machine to increase raw silk yield and reeling efficiency with various silk reelable cocoons. The obtained results are as follows; 1. The mean silk reelability ratio(X)of the Korean cocoons during the last ten years was 61 per cent, beside 64.7 per cent in autumn cocoon and 57.3 per cent in spring cocoon. However, the ratio variation of autumn cocoons was larger than that of spring cocoons. 2. A positive correlation between cocoon filament breaks during its process and silk reelability levels was shown to be significant. The cocoons of both poor and good reelability evidenced "J" shape distribution on the filament break graph by the order of reeling cocoon end. Many bave breaks were found at the inner shell of the cocoons, or in case of poor reelability cocoons. 3. The morphology of broken cocoon ends during the process was classified into A, B, C, D, E and F types, The occurrence of B type was majority, but that of F type was minority among them. 4. In case of the cocoon cooking, H-type ion-exchanged soft water was better for good reelability cocoons, Na and H-type ion exchanged neutral soft water for those of fair reelability, and alkaline (Na-type) soft water for those of poor reelability, respectively. 5. The modification of cooking water by mixing the above different types of water (50％ Na-type and 50％ H-type passed by standard natural water; 75％ Na-type and 25％ H-type passed by hard natural water; 25％ Na-type and 75％ H-type passed by soluble natural water) made higher yield of raw silk with tess breaks of thread. 6, In case cocoon ends groping water included sodium hexametaphosphate as much as 800 ppm. the groping efficiency and raw silk yield of cocoon was improved. The effect was pronounced in case of poor reelability cordons. 7. The most reasonable cocoon cooking and silk reeling condition for automatic silk reeling process were observed to be rather incomplete cook with good reelability cocoons and optimum cook with poor reelability cocoons succeeded by the reeling bath temperature of 45$^{\circ}C$, 8. The reasonable silk reeling velocities were observed to be about 150m per min. for good reelability cocoons, 120m per min. for fair reelability ones and 90 to 120m per min. for poor reelability ones. 9. In order to improve the raw silk yield of cocoons and reeling efficiency, the cocoon stand-by-ratio for reeling should be kept at the level of 40 per cent for good reelability cocoons or at 60 per cent for poor reelability ones beside necessary end found cocoon condition.