• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.154-154
• /
• 2006

Samsung Electro Mechanics ink jet has developed ultra high resolution alignment system. The alignment system has been developed for repeatable printing of conductive ink. The resolution of alignment system is 0.5um and the velocity of printing working plate is 1.5m/s. So far repeated printing results included sintering process have over 30um of drop mislocation data. In order to improve line thickness and conductivity of metal line, we need to develop the higher mechanical accurate align system. On the demand, this developed align system has under $1{\sim}2{\mu}m$ mispositioning performance and can measure of mechanical accuracy of inkjet printer, as well as the straightness of jetted drop from inkjet head. There is no kinds limit of substrate and ink to use SEM alignment system. By using this alignment system, we progress two experiment of reiterate printing drop and making conductive line on the glass and photo paper. Optical microscope and 3D profiler has been used for measurement of printed ink.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.47 no.2
• /
• pp.311-322
• /
• 2023

In this study, the properties of various material combinations were evaluated and an ideal material for fabricating protection pads for women's army combat uniforms was determined. Eight specimens were used for the evaluation: two types of materials, namely thermoplastic polyurethane for 3D printing, T and ethylene-vinyl acetate, E; two infill densities, namely 10%, 10 and 30%, 30; two types of pad designs, i.e., without holes, A and with holes, B; 2×2×2=8 and control E. The tensile strength, flexural strength, impact absorption, and weight of these specimens were evaluated. Results revealed that E was the most flexible material; however, its tensile strength and impact absorption were very low. Protection pads made from T (T-10A, T-10B, T-30A, and T-30B) had excellent tensile strength and impact absorption; however, they had low performance in ease of movement. Alternatively, protection pad with holes and an infill density of 30% produced using a combination of T and E had a high initial tensile modulus and exhibited excellent impact absorption. Moreover, it was flexible and light, which satisfies the standards and conditions required by protection pads. However, if T-E-10A and T-E-30B exhibited low impact absorption, as required, they can be regarded as appropriate materials for protection pads.

• The Research Journal of the Costume Culture
• /
• v.18 no.5
• /
• pp.1003-1016
• /
• 2010

The purpose of this study is to reorganize any rusty image including natural modeling characteristic presented from the natural phenomenon to certain patterns in order to create the fashion design that are valued in the expansion of independently expressional area and modeling art. As a method for research, the author analyzed the concept and characteristic for rust with a base of theoretical background by the documental research and realistic consideration, analyzed its modeling characteristic through domestic and overseas pictures, and e-documents as data, inspected the modeling activities of various categories that various images were adapted related to rust, looked into the concept of Digital Textile Printing and its producing procedure as an expressional method, and analyzed the examples of modern dress and its ornament making use of Digital Textile Printing. The conclusions of this study are as below. First, the rust occurred due to the natural phenomenon is the bond with different material like metal, each unique modeling characteristic occurs and harmony of various patterns has abundant aesthetic value. Second, the author could endowed sensible characteristic and speciality with works and could produce creative fashion design that painting, abstractive pattern and harmony of unique sense of colors are significant by using the image of rust, Third, to emphasize natural feeling of rust, the author could develop creative design that simple silhouette and impressive pattern look significant by reorganizing and applying rust according to repetition, increment, rhythm, contract, emphasis and harmony. Fourth, Digital Textile Printing method is used to induce visual effect by the expression of feels of rust, and the author could express the natural patterns, delicate expression for the feels of a material and unique design of emotion.

• Journal of Fashion Business
• /
• v.15 no.5
• /
• pp.43-54
• /
• 2011

Digital Textile Printing(DTP) is appropriate for quick response system(QRS) and is closely connected with high value added fashion industry. Fashion products of high price are mainly silk and cotton. For high quality DTP products, it is important to optimize the parameters of media, pre and after-treatment, ink, printer, etc. DTP for these two fiber materials is also accompanied certainly with steaming as after-treatment process for coloration. Role of steam is like water in exhaustion dyeing. Steam can diffuse dye or ink in printing paste to fiber. Quality of DTP products depend on after-treatment processes such as steaming, washing, drying. Current production amount of DTP is smaller than one of conventional textile printing. However conventional after-treatment system has been using so far. This is mismatched with DTP in terms of process efficiency, spot work of small lot, quality control. In this study, continuous after-treatment system has been suitably designed for DTP that washing and drying are available after steaming. So, It is possible to improve efficiency of DTP process. Especially, the effects of after-treatment process, such as temperature of heat drum, steaming time on printability, color difference, color fastness were examined. Two types of samples(cotton knit and silk fabrics) were used. The results were obtained as follows : First, there is no a wide difference between the K/S values of cotton and silk treated with continuous after-treatment system and those of sample treated with conventional printing after-treatment method. So it is more effective to use the continuous after-treatment system than conventional printing after-treatment system in case of the daily throughput of 1,000 yards below. Second, after continuous after-treatment for DTP, K/S values were increased and lightness($L^*$) values were decreased. ${\Delta}E$ values were below 2.3. Third, DTP samples treated with continuous after-treatment system were tested for fastness(washing, light, rubbing). Grades of fastness(washing, light, rubbing) were above 3 grade.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.583-584
• /
• 2008

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2009.03a
• /
• pp.191-192
• /
• 2009

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.81-82
• /
• 2010

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.251-252
• /
• 2010

• The Research Journal of the Costume Culture
• /
• v.14 no.5
• /
• pp.828-839
• /
• 2006

These days, by the accelerated developments of science and industries and the menaces of war and terror, humans have come to have instinct to recur and nostalgia to nature and thereby many art works and designs with natural objectives have begun to be produced. Also the design in 21st century requires creative products based on cultural speciality of the countries. As the examples, we may easily find the images of the countries from visual expressions or products when we get in touch with the products of so called advanced countries in design i. e. U.S.A. Japan, Germany, France, Italy, countries of Scandinavian peninsular. This study, in such stream of the times, was to express our culture's own originality on clothing design with butterfly that is one of natural thing as the material but limited the boundary to realistic butterflies in folk drawings of the times of Chosun. As for the technique of expression, used digital textile printing for best expression of the fine lines, realistic shapes and peculiar colors of the butterflies in Chosun folk drawings and used diverse materials as materials for printing for diversity of the designs. Thereby this thesis is purposed to grope the products with superior competitiveness in the world market by presenting the realistic butterflies in Chosun folk drawings as motives with cultural value native to Korea and applying them to clothing designs.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1219-1225
• /
• 2003

According to the increase of lifetime and efficiency, the interest in the pLED has dramatically increased recently because pLED can be applied to large-size and flexible displays. The core process in the manufacture of pLED is the printing process of red, green and blue light emitting polymers (LEP), and inkjet printing method is one of the promising technology to print red, green and blue LEP on glass substrates. In this work, we developed a multi-head inkjet patterning system with 3 heads for each color. The developed inkjet patterning system is composed of the precise positioning system, head controller circuit, real-time ink drop evaluation system, maintenance system, and stable ink supply system. Finally, we investigated the stability and reliability of the system by printing red, green and blue LEP on the dummy substrate.