• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.288-291
• /
• 2014

MRE(Magneto-rheological Elastomer) is a material which shows reversible and various modulus in magnetic field. Comparing to conventional rubber vibration isolator, MREs are able to absorb broader frequency range of vibration. These characteristic phenomena result from the orientation of magnetic particle (i.e., chain-like formation) in rubber matrix. In this study, Silicon was used as a matrix in order to manufacture MREs. Magnetic reactive powder(MRP), having rapid magnetic reaction, was selected as a magnetic particle to give magnetic field reactive modulus. The mechanical properties of manufactured MREs were measured with the application of magnetic field. The analysis of MR effect was carried out by FFT analyzer with various induced magnetic field. As the addition of CIP and induced magnetic field intensity increased, increment of MR effect was observed.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.7
• /
• pp.1-8
• /
• 2008

Low Density Parity Check codes(LDPC) are recently focused on communication systems due to its good performance. The standard of WiBro has also included LDPC codes as a channel coding. The weak point of implementation for LDPC encoder is that conventional binary Matrix Vector Multiplier has many clock cycles which limit throughput. In this paper, we propose semi-parallel architecture by using cyclic shift registers and exclusive-OR without conventional Matrix Vector Multipliers over the standard parity check matrices with Circulant Permutation Matrices(CPM). Furthermore, multi-rate encoder is designed by using proposed architecture. Our encoder with multi-rate for IEEE 802.16e LDPC has lower clock cycles and higher throughput.

• Journal of the Korean Home Economics Association
• /
• v.47 no.8
• /
• pp.13-24
• /
• 2009

This study investigated college students' time management behavior and time satisfaction according to the use of the time-matrix. Data were collected from 400 college students in Seoul by a self-administered questionnaire. Collected data were subjected to descriptive and comparative statistical analyses using the software SPSS(version 12.0). The conclusions of this study were as follows; 1. The use of time-matrix was categorized into 4 task groups: (1) not urgent but important, (2) urgent but notimportant, (3) neither urgent nor important, (4) urgent and important. 2. Time-management-behavior of planning was categorized into 3 components: standard setting, reality overlapping and implementing into 3 components(i.e., checking, adjusting, facilitating condition). 3. In all domains except overlapping, 'not urgent but importance' was the most popular managerial behavior. 4. However, 'neither urgent nor important' was voted the most popular in terms of managerial satisfaction. This study provides useful knowledge on managerial time-use categorization. Furthermore also contributes towards the knowledge base of time-managerial behaviors and dispels stereotypical-thinking that only bing busy all the time using is an indication of good time management behavior. Finally, this study advocates use of the time-matrix to achieve efficient time management.

• International Journal of Railway
• /
• v.7 no.3
• /
• pp.85-89
• /
• 2014

The use of pozzolanic materials in concrete mixtures can enhance the mechanical properties and durability of concrete. By reactions with pozzolanic materials and calcium hydroxide in cement matrix, calcium-silicate-hydrate (C-S-H) increases and calcium hydroxide decreases in cement matrix of concrete. Consequently, the volume of solid materials increases. The pozzolanic particles also fill spaces between clinker grains, thereby resulting in a denser cement matrix and interfacial transition zone between cement matrix and aggregates; this lowers the permeability and increases the compressive strength of concrete. Moreover, the total contents of alkali in concrete are reduced by replacing cements with pozzolanic materials; this prevents cracks due to alkali-aggregate reaction (AAR). In this study, nanosilica is incorporated in cement pastes. The differences of microstructural compositions between the hydrated cements with and without nanosilica are examined using nanoindentation, XRDA and $^{29}Si$ MAS NMR. The results can be used for a basic research to enhance durability of concrete slab tracks and concrete railway sleepers.

• Asia pacific journal of information systems
• /
• v.34 no.1
• /
• pp.49-90
• /
• 2024

Intradisciplinary research refers to research that integrates ideas often associated with different research domains in a discipline. Such cross-fertilization leverages abundant diversity present in the IS discipline to tackle increasingly complex IS problems and grand challenges. Despite its importance and recent attention, a concerted, sustained effort toward intradisciplinary research is lagging. A fundamental issue we see is a lack of an elaborate IS research map that effectively shows similarities and differences among research domains and demonstrates types of ideas that may travel and integrate into different domains. We thus aim to propose an elaborate IS research map and compile research elements that can be tried and combined across research domains. To do so, we utilize two IS classics (i.e., IT views and IS phenomena), identify their complementarity, and interweave the two disparate ways of portraying the IS research field. The resultant view-phenomenon (VP) matrix specifies research domains based on two consistent, comprehensive criteria and helps researchers discern similarities and differences among research domains more effectively. The VP matrix also sheds light on a variety of research elements that can flow across research domains. The VP matrix along with the research elements together facilitate intradisciplinary efforts and, more broadly, help the IS discipline to prosper. The VP matrix is particularly helpful for doctoral students and young scholars.

• 한국전기화학회:학술대회논문집
• /
• 2002.07a
• /
• pp.223-226
• /
• 2002

• Journal of the Korean Statistical Society
• /
• v.7 no.2
• /
• pp.101-104
• /
• 1978

This paper considers the problem of estimating $\hat{\beta}$ in the case errors occur in observing the values of q-variables $X_1, X_2, ..., X_q$. The approximated estimator $\hat{\beta}(e)$ is obtained and its expected value, bias and covariance matrix are studied.

• Journal of Biosystems Engineering
• /
• v.27 no.6
• /
• pp.529-536
• /
• 2002

The performance of stilting engine, in particular, its energy conversion efficiencies are critically influenced by the regenerator characteristics. The regenerator characteristics are influenced by effectiveness, void fraction. heat transfer loss and fluid friction loss in the regenerator matrix. These factors were influenced by the surface geometry and material properties of the regenerator matrix. The regenerator design goals arc good heat transfer and low pressure drop of working Bas across the regenerator. Various data for designing a wire screen matrix have been given by Kays and London(1984). The mesh number of their experiment. however, was confined below the No. 60. which seems rather small for the Stirling engine applications. In this paper. in order to provide a basic data for the design of regenerator matrix, characteristics of heat transfer and flow friction loss were investigated by a packed mettled of matrix in oscillating flow as the same condition of operation in a Stirling engine. Seven kinds of sing1e wire screen meshes were used as the regenerator matrices. The results are summarized as follows; 1. While the working fluid flew slowly in the regenerator. the temperature difference was great at the both hot-blow(the working fluid flows from healer to cooler) and cold-blow(the working fluid flows from cooler to healer). On the other hand. while the working fluid flew fast. the temperature difference was not distinguished. 2. The No.150 wire screen used as the regenerator matrix showed excellent performance than tile others. 3. Phase angle variation and filling rate affected heat transfer or regenerator matrices. 4. Temperature difference between the inlet and outlet of the regenerator is very hish in degree of 120 phase angle.

• Journal of Distribution Science
• /
• v.14 no.1
• /
• pp.67-74
• /
• 2016

Purpose - In this paper, the degree of similarity and dissimilarity between pairs of 50 major cities in China can be shown on the basis of three evaluation variables(internet businessman index, internet shopping index and e-commerce development index). Dissimilarity distance matrix is used to analyze both similarity and dissimilarity between each fifty city in China by calculating dissimilarity as distance. Higher value signifies higher degree of dissimilarity between two cities. Cluster analysis is exploited to classify 50 cities into a number of different groups such that similar cities are placed in the same group. In addition, multidimensional scaling(MDS) technique can obtain visual representation for exploring the pattern of proximities among 50 major cities in China based on three development performance attributes. Research design, data, and methodology - This research is performed by the 2013 report provided with AliResearch in China(1/1/2013~11/30/2013) and utilized multivariate methods such as dissimilarity distance matrix, cluster analysis and MDS by using CLUSTER, KMEANS, PROXIMITIES and ALSCAL procedures in SPSS 21.0. Results - This research applies two types of cluster analysis and MDS on three development performances based on the 2013 report of Aliresearch. As a result, it is confirmed that grouping is possible by categorizing the types into four clusters which share similar characteristics. MDS is exploited to carry out positioning of both grouped locations of cluster and 50 major cities belonging to each cluster. Since all the values corresponding to Shenzhen, Guangzhou and Hangzhou(which belong to cluster 1 among 50 major cities) are very large, these cities are superior to other cities in all three evaluation attributes. Twelve cities(Beijing, ShangHai, Jinghua, ZhuHai, XiaMen, SuZhou, NanJing, DongWan, ZhangShan, JiaXing, NingBo and FoShan), which belong to cluster 3, are inferior to those of cluster 1 in terms of all three attributes, but they can be expected to be the next e-commerce revolution. The rest of major cities, in particular, which belong to cluster 4 are relatively inferior in all three attributes, so that this automatically evokes creative innovation, which leads to e-commerce development as a whole in China. In terms of internet businessman index, on the other hand, Tainan, Taizhong, and Gaoxiong(which belong to cluster 2) are situated superior to others. However, these three cities are inferior to others in an internet shopping index sense. The rest of major cities, in particular, which belong to cluster 4 are relatively inferior in all three evaluation attributes, so that this automatically evokes innovation and entrepreneurship, which leads to e-commerce development as a whole in China. Conclusions - This study suggests the implications to help e-governmental officers and companies make strategies in both Korea and China. This is expected to give some useful information in understanding the recent situation of e-commerce in China, by looking over development performances of 50 major cities. Therefore, we should develop marketing, branding and communication relevant to online Chinese consumers. One of these efforts will be incentives like loyalty points and coupons that can encourage consumers and building in-house logistics networks.

• Journal of Nutrition and Health
• /
• v.51 no.5
• /
• pp.379-385
• /
• 2018

Purpose: Zinc (Zn) is an essential trace element for bone mineralization and osteoblast function. We examined the effects of Zn deficiency on osteoblast differentiation and mineralization in MC3T3-E1 cells. Methods: Osteoblastic MC3T3-E1 cells were cultured at concentration of 1 to $15{\mu}M$ $ZnCl_2$ (Zn- or Zn+) for 5, 15 and 25 days up to the calcification period. Extracellular matrix mineralization was detected by staining Ca and P deposits using Alizarin Red and von Kossa stain respectively, and alkaline phosphatase (ALP) activity was detected by ALP staining and colorimetric method. Results: Extracellular matrix mineralization was decreased in Zn deficiency over 5, 15, and 25 days. Similarly, staining of ALP activity as the sign of an osteoblast differentiation, was also decreased by Zn deficiency over the same period. Interestingly, the gene expression of bone-related markers (ALP, PTHR; parathyroid hormone receptor, OPN; osteopontin, OC; osteocalcin and COLI; collagen type I), and bone-specific transcription factor Runx2 were downregulated by Zn deficiency for 5 or 15 days, however, this was restored at 25 days. Conclusion: Our data suggests that Zn deficiency inhibits osteoblast differentiation by retarding bone marker gene expression and also inhibits bone mineralization by decreasing Ca/P deposition as well as ALP activity.