• 한국재난정보학회 논문집
• /
• 제10권1호
• /
• pp.123-140
• /
• 2014

회전쉘의 정적문제 및 동적문제에 대해서 선점법에 의한 공간영역의 이산화에 대한 유효성을 비교 검토하였고, 정식화에 있어서 이산화 후의 연립방정식 및 시간에 관한 연립상미분방정식의 계수행렬에 대한 영향을 검토하였다. 수치해석법에는 동적특성의 문제를 간단하고 효과적인 방법을 위하여 선점법을 제안하였으며, 수치해석예로서 평균2승잔차법과의 비교검토로 고정도의 해석을 위한 정확성을 검증하였다.

• 국제초고층학회논문집
• /
• 제5권3호
• /
• pp.155-165
• /
• 2016

A much higher level of seismic performance is needed for supertall buildings due to increased demands for their functional continuities and the recognized needs for their continuing emergence in metropolitan areas. This paper analyzes, compares, and contrasts responses recorded during the 2011 Tohoku-oki Earthquake of different supertall buildings featuring conventional and vibration-controlled engineering systems. The superior performance and advantage of the latter are pointed out, and the typical dynamic properties, response characteristics, and effects on the secondary system are discussed. Ongoing efforts to enhance vibration control performance are described, covering the development of specifications, use of performance curves and targeted displacement design, and methods to find appropriate locations of damper installation resulting in a minimized amount of dampers.

• 한국정밀공학회지
• /
• 제9권3호
• /
• pp.117-121
• /
• 1992

There have been many studies on chatter vibration in machining but there seems to be no regulations to decide the commencing point of chatter objectively. The development of an objective method which can estimate and detect chatter commencement is very much in need for automatic manufacturing systems, dynamic performance tests for machine tools, and so on. In this study, an approach for in-process monitoring and for deciding commencing point of the chatter vibration using the frequency band-energy method was proposed. From this method, in-process monitoring system for detection the chatter vibration was developed, and investigated its practical possibility. As a result, it is shown by experiments that the chatter vibtation can be detected accurately. Since the changing pattern of the signal energy in certain frequency band during chattering is seldom affected by the variation of cutting conditions, if adequate pre-measures are taken, this method can be widely used in most machining processes.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.945-952
• /
• 1994

In this paper, a mathematical model for a belt driven system is proposed to analyse the vibtation characteristics of the driving units with belts and the free and forced vibration analyses are carried out. The mathematical model for model for the belt-driven system includes belts,pulleys, spindle and bearings. Using the Hamilton principle, the 4 nonlinear governing equations and the 12 nonlinear boundary conditions are derived. To linearize and discretize the nonlinear govering equations and boundary conditions, the perturbation method and Galerkin method are used. Also, the free vibration analyses for the various parameters of the belt driven system, which are belt tension, belt length, material property of belt, belt speed and pulley mass are made. The forced vibration analyses of the system are made and the dynamic responses for the main parmeters are analysed with the belt driven system.

• 한국재난정보학회 논문집
• /
• 제10권1호
• /
• pp.1-14
• /
• 2014

본 연구에서는 탄성이론에 근거하여 3차원 spline 대판법을 이용하여 직교이방성판의 3차원 응력해석을 제시한다. 직교이방성판은 아라고나이트 결정과 시트카 스프러스로 구성되어 있다. 해석에 대한 수렴섬과 정밀도의 정확성을 수치해석 예를 들어 검증하고, 탄성이론에 근거하여 이산화된 수치해석법에 의해 결과을 비교 검토한다. 해석법에 따라 해의 수렴성과 정밀도를 구할 수 있으며, 두께폭 비, 종횡비와 아라고나이트 결정과 시트카 스프러스판의 수직응력분포에 대한 경계조건의 영향을 검토하고, 응력 분포의 특성에 미치는 직교이방성과 강한 이방성의 특징의 차를 비교 검토한다.