• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1998년도 추계학술대회
• /
• pp.295-296
• /
• 1998

With xeroradiography appearance, DR (Digital Radiography) system have been studying for X-ray detection using photoreceptor. Also detection method for receptor charge change have been developing variably. We use photoreceptor material of a-Se(Amorphous Selenium) with high DQE, high SNR(Signal to Noise Ratio) and high transformation efficiency of X-ray signals into electrical signals. After a-Se receptor is uniformly charged by using Arc discharge, X-ray is exposed. Then a-Se receptor produce subtle charge variation and MOSFET detect charge variations. The detected signal pass A/D converter and signal processing by PC. As results, the initial voltage is 8V. It has wide dynamic range needed digital radiography system. In this study, we obtained data with changing kVp(tube potential voltage) and fixed 8mAs(tube current by exposure time) in X-ray system. However MOSFET detector for X-ray signal is not tested X-ray mAs variations. But if MOSFET detector is tested X-ray mAs variation and exactly calibrated multichannel is made and noise-reduction is done, suitable DR system readout method will be done.

• 한국통신학회논문지
• /
• 제28권5B호
• /
• pp.414-426
• /
• 2003

정책기반 네트워크 관리 구조는 정책을 전송하기 위해 COPS(Common Open Policy Service)와 이의 모델인 COPS-PR (Policy Provisioning)을 사용한다. COPS-PR은 여러 네트워크 관리 영역에서 효율적으로 활용될 수 있는 매커니즘을 가지고 있다. COPS-PR은 정책을 저장하고 디바이스정보를 저장하기 위해 PIB(Policy Information Base)를 사용한다. PIB는 PRC(Provising Class)와 PRI(Provisions Instances)로 구성되어 있다. PIB는 정책을 통해 디바이스를 제어하기 위한 기능이 미리 구현되어 있다. PIB에 PRI를 추가시킴으로써 정책을 수행시킬 수 있다. 하지만 미리 구현되어 있는 기능에 한정되어 사용하기 때문에 새로운 기능에 대해선 정책을 적용할 수 없는 단점을 가지고 있다. 본 논문에서 제안하는 구조는 기존 PIB에 단점을 보완하기 위해 XML로 변환된 PIB를 사용한다. XML 기반 PIB는 동적으로 새로운 기능의 추가가 가능하며, 정책을 통해 이를 수행시킬 수 있는 구조이다. 또한 본 구조에서는 정책 기술 시에도 XML을 이용하였다. 정책 기술시 XML을 이용하면 서로 다른 정책기술 언어를 사용하는 이 기종의 관리 시스템간에 정책 교환 시 XSLT(eXtensible Stylesheet Language Transformation)을 이용하여 쉽게 변환될 수 있다. 본 논문에서는 동적 확장을 고려한 XML기반 네트워크 관리 구조를 제안하고, 이를 구현하여 기존 시스템과의 차별성을 평가하였다.

• Journal of Power Electronics
• /
• 제16권3호
• /
• pp.1110-1121
• /
• 2016

The mathematical model of a three phase PWM converter under the stationary αβ reference frame is deduced and constructed based on a Proportional-Resonant (PR) regulator, which can replace trigonometric function calculation, Park transformation, real-time detection of a Phase Locked Loop and feed-forward decoupling with the proposed accurate calculation of the inductance voltage vector. To avoid the parallel resonance of the LCL topology, the active damping method of the proportional capacitor-current feedback is employed. As to current vector error elimination, an optimized PR controller of the inner current loop is proposed with the zero-pole matching (ZPM) and cancellation method to configure the regulator. The impacts on system's characteristics and stability margin caused by the PR controller and control parameter variations in the inner-current loop are analyzed, and the correlations among active damping feedback coefficient, sampling and transport delay, and system robustness have been established. An equivalent model of the inner current loop is studied via the pole-zero locus along with the pole placement method and frequency response characteristics. Then, the parameter values of the control system are chosen according to their decisive roles and performance indicators. Finally, simulation and experimental results obtained while adopting the proposed method illustrated its feasibility and effectiveness, and the inner current loop achieved zero static error tracking with a good dynamic response and steady-state performance.

• 한국지역지리학회지
• /
• 제18권3호
• /
• pp.283-297
• /
• 2012

본 연구의 목적은 클러스터 생애주기 분석을 기반으로 서울디지털산업단지의 진화 경로와 역동성을 분석하는 것이다. 1960년대 중반부터 1990년대 후반까지 업체수와 고용자수 변화를 중심으로 구로공단의 발생-성장-유지-쇠퇴의 생애주기를 구분하고 시기별 특성을 분석하였다. 1990년대 후반 이후 업체수와 고용자수가 급증하였고, 소규모 기술집약 중소기업과 지식기반 서비스기업이 서울디지털산업단지의 성장과 구조재편을 주도하였다. 이것은 지식산업센터(아파트형공장) 증가로 가능했으며, 2000년대 중반 이후에는 지식기반 클러스터로의 변환의 생애주기 모습을 보여준다.

• 한국자동차공학회논문집
• /
• 제2권6호
• /
• pp.94-101
• /
• 1994

About vibration model of Six-degrees-of-freedom(DOF), in mass load, examined results for knowing dynamic interference and response variation is as follows; In case of putting mass load upon the object, experimented results on two-degrees-of-freedom of the translation-1 direction and the rotation-1 direction at open-loop-control system, about 0.19 arcsed in input of the translation-$0.1{\mu}m$ and $0.022{\mu}m$ on input of the rotation-0.5 arcsec, the justicse of motion equation is acknowledged as confirming the appearance of the interference-$0.022{\mu}m$. In establishing calculation of transformation matrix by using analogue circuit, as simulating results that used incomplete differentiation, interference is $1.7{\times}10^{-3}$ arcsec on input of the translation-$0.1{\mu}m$ and $1.4{\times}10^{4}{\mu}m$ on input of the rotation-0.5 arcsec in open-loop-control system. Also it is $4.2{\times}10^{-4}$ arcsec on input of the translation-$0.1{\mu}m$ and $5.6{\times}10^{-5}{\mu}m$ on input of the rotation-0.5 arcesc in closed-loop-control system. As closed-loop-control system is better than open-loop-control system, equivalent accordance is confirmed on original response. Finally, fundamental validity of this theory is acknowledged.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1996년도 추계학술대회
• /
• pp.74-79
• /
• 1996

This paper describes a methodology for the development of models of discrete event system(DES). The methodology is based on transformation of continuous state space into discrete one to homomorphically represent dynamics of continuous processes in discrete events. This paper proposes a formal structure which can couple DES models within a framework. The structure employs the DEVS formalism for the DES models. The proposed formal structure has been applied to develop a DEVS model for the human cardiovascular system. For this, the cardiac cycle is partitioned into a set of phases based on events identified through VisSim simulation in the CS of the electrical analog model. VisSim is the simulation tool of visual environment for developing continuous, discrete, and hybrid system models and performing dynamic simulation. For each phase, a CS of the electrical analog model for the cardiovascular system has been simulated by VisSim 2.0. To validate this model, first develop the DEVS model, then simulate the model in the DEVSIM++ environment. It has same simulation results for the data obtained from the CS simulation using VisSim. The comparison shows that the DEVS model represents dynamics of the human heart system at each phase of cardiac cycle.

• 정보처리학회논문지D
• /
• 제11D권2호
• /
• pp.281-292
• /
• 2004

공간 질의에 대한 선택율 추정은 가장 효율적인 실행 계획을 찾는데 이용되는 매우 중요한 과정이다. 공간 도메인이 큰 경우, 기존 연구의 요약정보는 상대적으로 적은 정보로 선택율을 추정하기 때문에 좋은 선택율을 유지하기 어렵다. 따라서, 이 논문에서는 작은 저장공간에 공간요약정보를 압축하는 새로운 기법인 MW 히스토그램을 제안한다. 이 히스토그램은 MinSkew 분할 알고리즘과 웨이블릿 변환이 결합되어 적은 저장공간에서도 타당한 선택율과 압축효과를 얻을 수 있고, 동적 갱신에 대해 효율적으로 대처할 수 있는 구조를 가진다. 실험 결과를 통하여, 버켓 수가 0.3M/6인 MW 히스토그램이 5%-20% 질의에서 평균적으로 좋은 성능을 보이고 있어, MW 히스토그램이 적은 저장공간에서 더 좋은 선택율을 얻을 수 있음을 확인시켜주었다.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제23권1호
• /
• pp.37-46
• /
• 2017

Purpose: There is little information about China's medical service system and health care facilities in Korean medical architecture papers, which is inconvenient for scholars engaged in medical building research and comparison. Futhermore, the transformation of the notion of health and the ascension of the service needs show the lack of medical function, and then make functions of hospital construction are always in the state of dynamic renewal. Therefore, the purpose of this study is to analyze the Chinese medical service system and general hospital related laws and regulations for future research to provide effective analysis of data, and find shortcomings. Methods: This study was conducted by a research on law and regulation of China's medical service system and general Hospital. Results: At present hospital construction in China is in the period of rapid development and it exposes the layout of medical health facilities is not reasonable and the service does not reach the designated position and so on. Overall, it requires more detailed guidelines to enhance the quality of medical health services. Implications: It is expected that the research of this paper will provide effective reference for future research on Chinese medical architecture system and medical facilities, and can promote and perfect the construction of Chinese medical architecture theory system.

• Nuclear Engineering and Technology
• /
• 제50권2호
• /
• pp.218-222
• /
• 2018

An oxide-dispersion-strengthened (ODS) layer was formed on Zircaloy-4 tubes by a laser beam scanning process to increase mechanical strength. Laser beam was used to scan the yttrium oxide ($Y_2O_3$)-coated Zircaloy-4 tube to induce the penetration of $Y_2O_3$ particles into Zircaloy-4. Laser surface treatment resulted in the formation of an ODS layer as well as microstructural phase transformation at the surface of the tube. The mechanical strength of Zircaloy-4 increased with the formation of the ODS layer. The ring-tensile strength of Zircaloy-4 increased from 790 to 870 MPa at room temperature, from 500 to 575 MPa at $380^{\circ}C$, and from 385 to 470 MPa at $500^{\circ}C$. Strengthening became more effective as the test temperature increased. It was noted that brittle fracture occurred at room temperature, which was not observed at elevated temperatures. Resistance to dynamic high-temperature bursting improved. The burst temperature increased from 760 to $830^{\circ}C$ at a heating rate of $5^{\circ}C/s$ and internal pressure of 8.3 MPa. The burst opening was also smaller than those in fresh Zircaloy-4 tubes. This method is expected to enhance the safety of Zr fuel cladding tubes owing to the improvement of their mechanical properties.

• 대한금속재료학회지
• /
• 제47권12호
• /
• pp.834-841
• /
• 2009

A study on the welding of electrogalvanized TRIP (Transformation-Induced Plasticity) steels was done to compare the life of the electrode and the alloying phenomena on the electrode tip surface using singlephase AC and inverter-DC resistance welding processes. A longer life of the electrode (>200 welds) was achieved using the inverter-DC welding process. The tensile shear strength was higher in the electrode life test when welded with the inverter DC welding machine it maintained a higher value even when the welding nugget diameter was smaller than specified. When spot-welding was conducted using the single-phase AC welding process, a higher wear rate of the electrode was observed compared to that with the inverter-DC process. An alloying layer used to determine the rate of electrode growth showed differences in the metallurgical features of the surface alloying and Zn penetration depending on whether the single-phase AC process or the inverter-DC welding process was used. Moreover, changes in the dynamic resistance during the electrode life test were correlated with the electrode wear (or growth) rate.