• Computers and Concrete
• /
• 제22권1호
• /
• pp.63-70
• /
• 2018

The steel fiber reinforced concrete (SFRC) shows better performance under dynamic loading than conventional concrete in virtue of its good ductility. In this paper, a series of quasi-static experiments were carried out on the SFRC with volume fractions from 0 to 6%. The compressive strength increases by 38% while the tension strength increases by 106% when the fraction is 6.0%. The contact explosion tests were also performed on the ${\Phi}40{\times}6cm$ circular SFRC slabs of different volume fractions with 20 g RDX charges placed on their surfaces. The volume of spalling pit decreases rapidly with the increase of steel fiber fraction with a decline of 80% when the fraction is 6%, which is same as the crack density. Based on the experimental results, the fitting formulae are given, which can be used to predict individually the change tendencies of the blast crater volume, the spalling pit volume and the crack density in slabs with the increase of the steel fiber fraction. The new formulae of the thickness of damage region are established, whose predictions agree well with our test results and others. This is of great practical significance for experimental investigations and engineering applications.

• 한국세라믹학회지
• /
• 제44권4호
• /
• pp.194-197
• /
• 2007

Polyacrylonitrile (PAN)/$Fe_2O_3$ nanocomposite membranes with a thickness of 0.02 mm were electrospun by adding 0 to 5 wt% of $Fe_2O_3$ into PAN. The surface tension, density, kinematic viscosity and dynamic viscosity of the PAN solution were determined to be $33.8{\pm}1mN/m$, 0.9794 g/ml, $1548.6mm^2/sec$ and 1516.7 cP, respectively. The average diameters of PAN fibers containing 0, 1 2, 3, and 4 wt% $Fe_2O_3$ particles were 300, 260, 210, 130, and 90 nm, respectively. Fourier-transform infrared spectroscopy results showed that the addition of $Fe_2O_3$ nanoparticles to the PAN mat reduced the absorption peak intensity at $2242cm^{-1}$ ($C{\equiv}N$ bond) while it caused a sharp increase in the peak intensity at $2356cm^{-1}$(C=O bond). Thus, it appears that an appropriate amount of $Fe_2O_3$ nanoparticles in the PAN backbone leads to an improvement of the performance of the $CO_2$ gas sensor, most likely due to the change of functional groups in the membrane.

• 폴리머
• /
• 제25권1호
• /
• pp.56-62
• /
• 2001

Polyethylene terephthalate(PET) 필름 시편을 약 0.5~500 mm/min의 속도까지 단계적으로 연신시켰을 때, 플라스틱 변형이 일어나는 동안에 투명 및 불투명 밴드들이 존재하는 넥킹영역이 형성되었다. 상기 시편의 응력-변형 곡선을 살펴보면, 응력 진동이 뚜렷하게 발생하였음을 확인할 수 있었다. 한편, 열처리된 시편의 응력-변형 곡선을 살펴보면, 응력 진동이 발생하지 않았음을 확인할 수 있었다. 시편들의 미세구조는 광학 현미경을 통하여 동적으로 관찰하였고, 시편들의 열적 특성은 시차 주사 열량기를 사용하여 10 ${\circ}C$/min의 승온 속도에서 측정하였다. 또한, 시편들의 배향화 및 결정화 정도는 단색-핀홀법을 이용하여 측정하였고, 시편들의 탄성계수는 동적 기계 분석기를 통하여 -150~70 ${\circ}C$의 온도 범위에서 1 Hz의 주파수 대에서 측정하였다. PET 펠렛을 전기로에서 약 83${\circ}C$에서 30분 동안 열처리하여 투명한 PET 제품을 제작하였다.

• 한국실내디자인학회논문집
• /
• 제19권3호
• /
• pp.30-37
• /
• 2010

Dutch artist, Theo van Doesburg had shown short but strong experimental aesthetics in his works through De Stijl movement. He played a leading role for editing De Stijl magazine and performed various formative works such as painting, sculpture, and architecture. In 1923 he opened the first De Stijl exhibition cooperated with Cornelis van Eesteren. In this architecture exhibition he showed rich formal spirits of counter-construction in his major design works, that is Maison Particuliere and Maison D'artiste among three houses projects. Formal characteristics of counter-construction can be summed up under two categories, time and space. Analytical results are as follows; First, the characteristics of counter-construction related to time category include two types of two mode. One is linear aspect of time based on the viewer's movement. The other aspect is simultaneity caused by synoptical effect. These could be proved by the analysis of arrangement of color planes. Secondly, the spatial aspects of counter-construction are produced through two different ways of formal strategies. Van Doesburg arranged cubes in very irregular pattern. This treatment induces ambiguous void and creates feeling of subject's space. And, through deleting, shifting, and extending he could make dynamic spatial effect by interpenetration between in and out. This fluid space thus introduces movements of one's gaze and circulation. He denied traditional classical values which had ruled the western aesthetical discipline for centuries and believed that mankind can reach the realm of universal equilibrium by contrast and tension created by counter-construction. In this vein Theo van Doesburg was an avant-garde artist of Hegelian thoughts who adopted the dialectical method without following the formal characteristics from ancestors.

• 한국철도학회논문집
• /
• 제18권3호
• /
• pp.241-251
• /
• 2015

유도상 아스팔트 콘크리트 궤도(이하, 유도상 AC궤도)는 아스팔트 콘크리트 노반(이하, AC노반)의 존재에 의해 유도상 궤도에 비해 열차하중 분산효과에 의한 강화노반 두께 감소가 가능하며 누적 소성 변위도 작을 뿐만 아니라 유지관리 측면에서도 유리한 궤도 구조이기 때문에 국외에서 적용 사례가 증가하고 있다. 그러므로 유도상 AC궤도의 국내 도입을 검토하기 위해 선행 연구를 통해 수행한 AC노반 유무에 따른 거동 특성을 분석하여 현재 설계기준에 명시된 유도상 궤도의 단면과 유사한 성능을 보이는 유도상 AC궤도의 단면을 분석한 바 있으며, 실대형 정 동적 열차하중 재하 실험 결과와의 비교를 통해 해석 결과의 신뢰성을 검증하였다. 본 연구에서는 선행 연구를 바탕으로 AC노반의 두께를 일정하게 하고 강화노반 두께를 변화시켰을 때에 획득된 AC노반 하면에서의 변형률을 이용하여 설계 수명을 산정하였고 각각의 단면에 대한 확률론적 LCC분석을 통해 기대 설계 수명을 만족하면서 기존 유도상 궤도와 비교하여 동등 또는 동등이상의 성능을 갖는 유도상 AC궤도의 설계 단면을 제시하였다.

• PNF and Movement
• /
• 제18권2호
• /
• pp.183-194
• /
• 2020

Purpose: Functional ankle instability (FAI) causes tension in the joints, ligaments, and tendons, and the impact on visual and vestibular organs leads to imbalance. This study compared the effects of a traditional balance training program to virtual reality training to improve FAI. Methods: Twenty-four participants with FAI (CAIT score < 24) were assigned to a virtual reality training group (n = 13) and a traditional balance training group (n = 11). Both groups pursued their respective training program for four weeks. After a ten-minute warm-up, participants completed a 30-minute training session, three times per week. The traditional balance training group underwent static and dynamic training using a balance board and a stability trainer pad while the virtual reality group underwent balance training using a virtual reality program. Biorescue was used to measure changes in the speed and length of center of pressure (COP) for single-leg stance pre- and post-training. Results: The speed and length of COP improved significantly in both groups after training as compared to before (p < 0.05). However, there were no significant differences in these outcomes between the virtual reality training group and the traditional balance training group (p>0.05). Conclusion: The study findings confirm the effectiveness of both virtual reality training and traditional balance training in reducing ankle instability, with no difference in treatment effects.

• 대한기계학회논문집A
• /
• 제29권10호
• /
• pp.1407-1415
• /
• 2005

Strength change of an over-aged A12024 material was studied after being subjected to stages of severe plastic deformation by ECAP (Equal Channel Angular Pressing). Various kinds of strength value were measured using the conventional tensile test, Rockwell and Vickers hardness and the SP (small punch) test Due to limitation of the specimen size, tension test in transverse direction could not be conducted. Hence, SP test was employed for assessing the strength in transverse direction. Based on TEM observation the measured strength characteristics were explained based on the relation between microstructure, dislocation and strength. As the number of ECAP pass increases, the strength of A12024 was also increased. However, considerable change of strength, which is generally predicted, was not observed in this study. For the strength in transverse direction even decrease of the strength was observed after 6 passes of ECAP. It was argued that this decrease was due to dynamic recovery of dislocation density during or after ECAP processes at $150^{\circ}C$. The strength assessment equation proposed by the authors in the previous paper was shown to be very accurate. This argument was supported by comparing the results of conventional tensile test with those of SP test. It was also pointed that the Rockwell har(3ness value seemed to be able to represent the strength in the transverse direction.

• 콘크리트학회논문집
• /
• 제23권6호
• /
• pp.799-808
• /
• 2011

이 논문에서는 다방향성 GFRP 플레이트의 인장특성치에 대한 명확한 분석을 위해 FRP 보강근과 같은 정착장치를 이용한 시험 방법을 제안하였다. 등방성 또는 직교섬유로 강화된 FRP 플레이트의 인장시험은 ISO 규준으로 표준화 되어 있으며 역학적 특성치 분석을 위한 시험 방법의 연구도 진행되었으나 다방향성 GFRP 플레이트에 적용시 인장강도 특성치를 명확하게 확인하기 힘든 방법으로 나타났다. 국내에서 사용하는 시험 방법의 경우 일방향성 FRP 플레이트에 적용하는 ASTM 기준을 계속 사용하고 있으며 시험 결과 인장특성이 크게 나타나는 결과를 보였다. 따라서 이 연구에서는 국내외 규준을 분석하여 모든 규준에서 공통으로 제시하고 있는 방법을 기준으로 GFRP 인장시험을 실시하였으며 정착장치 길이와 시험 방법을 새롭게 제안하여 결과를 비교 분석하였다. 또한, 시험체 정착장치의 적절한 길이 비를 수치해석을 통해 도출하여 다방향성 GFRP 플레이트의 새로운 인장 시험 방법을 제시하였다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제8권4호
• /
• pp.330-343
• /
• 2016

This paper presents results of an experimental investigation of vortex-induced vibration (VIV) of a flexibly mounted and rigid cylinder with two-degrees-of-freedom with respect to varying ratio of in-line natural frequency to cross-flow natural frequency, $f^*$, at a fixed low mass ratio. Combined in-line and cross-flow motion was observed in a sub-critical Reynolds number range. Three-dimensional displacement meter and tension meter were used to measure dynamic responses of the model. To validate the results and the experiment system, x and y response amplitudes and ratio of oscillation frequency to cross-flow natural frequency were compared with other experimental results. It has been found that the higher harmonics, such as third and more vibration components, can occur on a certain part of steel catenary riser under a condition of dual resonance mode. In the present work, however, due to the limitation of a size of circulating water channel, the whole test of a whole configuration of the riser at an adequate scale for VIV phenomenon was not able to be conducted. Instead, we have modeled a rigid cylinder and assumed that the cylinder is a part of steel catenary riser where the higher harmonic motions could occur. Through the experiment, we have found that even though the cylinder was assumed to be rigid, the occurrence of the higher harmonic motions was observed in a small reduced velocity ($V_r$) range, where the influence of the in-line response is relatively large. The transition of the vortex shedding mode from one to another was examined by using time history of x and y directional displacement over all experimental cases. We also observed the influence of in-line restoring force power spectral density with $f^*$.

• 청정기술
• /
• 제14권3호
• /
• pp.193-203
• /
• 2008

피혁 제조 공정에서 계면활성제는 세정목적, 분산성 그리고 고착성 등을 부여하기 위해 사용되고 있다. 그러나 기존의 피혁 공정에서 사용되고 있는 계면활성제는 친수성기가 다량 포함되어 있어 향후 피혁 시장에서 요구될 것으로 기대되는 내오염성, 내수성, 내구성 통의 고기능성 특성을 재현하는데 문제점이 있다. 본 연구에서는 기존의 탄화수소 계열의 계면활성제의 문제점을 보완하기 위해서, 탄소-불소의 강한 결합에너지로 인한 표면장력 감소, 분산력 증대, 세정효과, 크롬 흡착력 증대 등의 특성을 나타내는 불소계 계면활성제를 제조하였다. 불소계 계면활성제의 사용으로 피혁 제조 공정의 분산성 증대, 침투력 상승 및 결합력을 향상시켜 크롬 흡착률 증가, 탄닝 폐수 배액의 크롬 함량 감소, 생물학적 산소 요구량, 화학적 산소 요구량의 함량 감소 및 물리적 특성이 향상되는 것을 확인하였다.