• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.12 s.117
• /
• pp.1244-1251
• /
• 2006

The objective of this paper is to get excitation forces of the engine at each of the brackets for the prediction of the vehicle interior noise by the powertrain. A powertrain geometry model is produced by CATIA and its FE model is made by MSC/Patran. A vibration mode analysis and a running mode analysis are experimentally implemented. After getting a satisfied MAC value by doing a correlation about a measured mode analysis value and analyzed value through MSC/Nastran software, all components are assembled through MSC/ADAMS software which is a dynamic analysis tool. We can predict the vibration of brackets which is the last points to occur the force of the engine combustion by analyzing the combustion force produced by engine mechanism.

• 한국태양에너지학회:학술대회논문집
• /
• 2008.11a
• /
• pp.103-111
• /
• 2008

One of the most popular internal combustion engines is the engine in the transportation device. Power is a parameter that shows the capabilities of an object that gives energy, for example the internal combustion engine. Power in this engine is measured by a device called dynamometer. The CFD (Computational Fluid Dynamic) fluent software was simulated several impeller variables to absorb power of engine. With that result, we knew the biggest dynamometer absorber power, cheapest and easy to be made. The hydraulic dynamometer is selected type of dynamometer as the result of design process. The basic principle of a hydraulic dynamometer is the same as centrifugal pump but it has low pump efficiency. The results of the test are maximum power and torque of the tested engine and the operation area of the selected hydraulic dynamometer.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.503-506
• /
• 1996

An integrated Robot control system for SCARA robot is developed. The system consists of an off-line programming(OLP), software and a robot controller using four digital signal processor(TMS32OC50). The OLP has functions of teaching task, dynamic simulator, three dimensional animation, and trajectory planning. To develop robust dynamic control algorithm, a new sliding mode control algorithm for the robot is proposed. The trajectory tracking performance of these algorithm is evaluated by implementing to SCARA robot(SM5 type) using DSP controller which has conventional PI-FF control algorithm. To make SCARA robot operate according to off-line teaching, an interface between OLP and robot controller in the integrated system is designed. To demonstrate performance of the integrated system, the proposed control algorithm is applied to the system.

• Research in Mathematical Education
• /
• v.17 no.4
• /
• pp.279-290
• /
• 2013

Presently, there has been growing interests in using mathematics' history in teaching mathematics [Katz, V. & Tzanakis, C. (Eds.) (2011). Recent Developments on Introducing a Historical Dimension in Mathematics Education. Washington, DC: Mathematical Association of America]. Thus, this article introduces some work of scholars from ancient East Indian culture like Bhaskara (AD 1114-1185) and Arabic culture such as Ibn Qurrah (AD 9th c) that are related to Pythagoras Theorem. In addition, some Babylonian creative works related to Pythagorean triples found in a tablet known as 'Plimpton 322', and an application of the Pythagorean Theorem found in another tablet named 'Yale Tablet' are presented. Applications of computer animation of dissection Motion Operations concept in 2D and 3D using dynamic software like Geometer's-Sketchpad and Cabri-II-and-3D. Nowadays, creative minds are attracted by the recent stampede in the advances of technological applications in visual literacy; consequently, innovative environments that would help young students, gifted or not, acquiring meaningful conceptual understanding would immerge.

• Journal of Korea Multimedia Society
• /
• v.19 no.7
• /
• pp.1188-1196
• /
• 2016

Integration systems help users consume services more effectively. However, previous integration systems can only enable predefined service cooperation to satisfy users, which is difficult to achieve user-centric service composition in dynamic environments. Therefore, in this paper, a dynamic service integration system is proposed to automatically combine services based on usage history. With this system, services can be dynamically composed to meet users' needs and information can be flexibly transited among heterogeneous services.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.1053-1058
• /
• 2003

Piezoelectric under water acoustic transducer is a kind of device for under water detection working as not only an actuator but also a sensor. The technique that can predict acoustical characteristics of transducer is important for robust design of transducer in harsh underwater environment. This paper represents the development of software for analyzing dynamic characteristics of piezoelectric acoustic transducers based on finite element method. Modal and transient analysis modulo for acoustic transducers are developed TWO dimensional model for Tonpilz transducer is used for the test of the developed nodal and transient analysis modules. and comparison is made with a commercial code, ANSYS.

• 유체기계공업학회:학술대회논문집
• /
• 2004.12a
• /
• pp.665-672
• /
• 2004

Chemical cleaning of boiler pipelines is necessary before the commissioning of thermal power plant after many years of construction. Fluid-Dynamic study for the chemical cleaning of boiler piplelines in Young-Heung thermal power plant is carried out. First, flow velocity necessary to sustain and exhaust solid particles in the vertical pipelines is calculated. Second, the flowrate necessary to make the calculated velocities in each vertical pipelines is calculated. Third, all the pipelines are analyzed with the Piping Systems Fluid Flow software to calculated the pressure loss in the pipelines. Finally, the operating point of the applied pump is calculated with the help of the same software.

• Proceedings of the KSR Conference
• /
• 1999.05a
• /
• pp.151-158
• /
• 1999

In this study, we developed the simulation program of an overhead catenary-pantograph system, The overhead catenary is modeled with point mass and the pantograph is replaced with 3 d. o. f. model which is composed of mass, spring and damper. Using the developed program, we analyzed the static structure of the overhead catenary and the dynamic characteristics of an overhead catenary-pantograph system such as uplift displacement of contact wire and contact force. we compared the analysis results with the results of GASENDO software developed at RTRI in Japan. The behaviors of uplift displacement of contact wire and contact force were similar with the results of GASENDO software.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.3
• /
• pp.261-273
• /
• 2016

Reconfigurable finite impulse response (FIR) filters whose filter coefficients and filter order change dynamically during run-time play an important role in the software defined radio (SDR) systems, multi-channel filters, and digital up/down converters. However, there are not many reports on such reconfigurable designs which can support dynamic variation of filter order and filter coefficients. The purpose of this paper is to provide an architectural solution for the FIR filters to support run-time variation of the filter order and filter coefficients. First, two straightforward designs, namely, (i) single-MAC based design and (ii) full-parallel design are presented. For large variation of the filter order, two designs based on (iii) folded structure and (iv) fast FIR algorithm are presented. Finally, we propose (v) high throughput design which provides significant advantage in terms of hardware and/or time complexities over the other designs. We compare complexities of all the five structures, and provide the synthesis results for verification.

• The Journal of Information Systems
• /
• v.14 no.3
• /
• pp.48-52
• /
• 2005

The Mobile agent-based distributed systems become obtaining significant popularity as a potential vehicle to allow software components to be executed on heterogeneous environments despite mobility of users and computations. However, as these systems generally force mobile agents to use only common functionalities provided in every execution environment, the agents may not access environment-specific resources. In this paper, we propose a new framework using Aspect Oriented Programming technique to accommodate a variety of static resources as well as dynamic ones whose amount is continually changed at runtime even in the same execution environment. Unlike previous works, this framework divides roles of software developers into three groups to relieve application programmers from the complex and error prone parts of implementing dynamic adaptation and allowing each developer to only concentrate on his own part. Also, the framework enables policy decision makers to apply various adaptation policies to dynamically changing environments for adjusting mobile agents to the change of their resources.