• Journal of the Korean Wood Science and Technology
• /
• 제16권3호
• /
• pp.48-64
• /
• 1988

This study was carried out to investigate the free vibrational properties of traditional and replaceable species for sounding board, using piezoelectrical accelerometer and signal analyzer. In the study, the frequency equations of free-free beam carrying a concentrated mass in the transverse vibration and of free-mass beam in the longitudinal vibration were used. The results obtained were as follows. 1. Average values of dynamic modulus of rigidity of Korean commercial species measured were as follows. Paulownia tomatosa (Thunb.) Steudel: $5.590\times10^9\;dyne/cm^2$ Tilia amurensis Rupr.: $5.414\times10^9\;dyne/cm^2$ Macckia amurensis Rupr.: $10.044\times10^9\;dyne/cm^2$ Fraxinus mandshurica Rupr.: $8.876\times10^9\;dyne/cm^2$ Ulmus davidiana var.japonica Nakai: $8.677\times10^9\;dyne/cm^2$ Pinus rigida Miller: $6.33\times10^9\;dyne/cm^2$ Fraxinus rhynchophylla Hance: $4.666\times10^9\;dyne/cm^2$ 2. The ratio of dynamic transverse Young's modulus to dynamic modulus of rigidity, $E_T/G_{LT}$, was 24.922 for Fraxinus rhynchophylla Hance, which was the highest, 7.317 for Paulownia tomentosa (Thunb.) Steudel, which was the lowest among Korean commercial species measured. 3. The value of longitudinal dynamic Young's modulus was about 3.7% and 19.8%, respectively, higher than those of transverse dynamic and static Young's modulus. The value of transverse dynamic Young's modulus was about 15.5% higher than that of static Young's modulus. 4. Predicted value of MOR in terms of correlation coefficient by transverse dynamic Young's modulus was slightly higher than that of static Young's modulus, but no significance was found out. 5. Transverse dynamic Youne's modulus was $(2.002\pm0.288)\times10^{11}\;dyne/cm^2$ for Fraxinus mandshurlca Rupr., which was the highest, $(0.601\pm0.100)\times10^{11}\;dyne/cm^2$ for Paulownia tomentosa (Thunb.) Steudel, which was the lowest among Korean commercial species measured. The sound velocity of sitka spruce was 5,685 m/sec, which was the highest. 6. Internal friction of Paulownia tomentosa (Thunb.) Steudel was shown the lowest value among Korean commercial species, $(8.795\pm1.795)\times10^{-3}$, but was higher than that of sitka spruce, $(7.331\pm0.991)\times10^{-3}$. Internal friction was shown negative correlation with density and dynamic Young's modulus, respectively. 7. K value was affected largely by internal friction and was the highest, $2.225\times10^8$ for Paulownia tomentosa (Thunb.) Steudel and was the lowest, $0.550\times10^8$ for Fraxinus rhynchophylla Hance. K value of Paulownia tomentosa (Thunb.) Steudel was higher than that of sitka spruce and K values of melapi and cottonwood, which have been considered to be replaceable species with sitka spruce in the piano industry, were lower than those of Paulownia tomentosa (Thunb.) Steudel and mill amurensis Rupr.

• Journal of the Korean Wood Science and Technology
• /
• 제35권5호
• /
• pp.76-86
• /
• 2007

This study was conducted to investigate the effects of formaldehyde to urea (F/U) mole ratio on thermomechanical curing of UF resin adhesives with different F/U mole ratios. Thermomechanical curing of these UF resin adhesives was characterized using parameters of dynamic mechanical analysis (DMA) such as the gel temperature, maximum storage modulus, and peak temperatures of storage and loss modulus. As the F/U mole ratio decreased, the gel temperature of UF resin adhesives increased. The maximum storage modulus as an indicator of the rigidity of UF resin adhesives decreased with decreasing F/U mole ratio. The peak temperature of tan $\delta$ increased with decreasing F/U mole ratio, indicating that the vitrification occurred faster for high F/U mole ratio of UF resin adhesives than for the one of lower F/U mole ratio. These results partially explained the reason why UF resin adhesives with lower F/U mole ratio resulted in relatively poor adhesion performance when they were applied.

• 한국도로학회논문집
• /
• 제17권4호
• /
• pp.77-87
• /
• 2015

PURPOSES: It is theoretically well known all over the world, that porous hot mixed asphalt (HMA) with hydrated Lime improves moisture and rutting resistance, and reduces pothole occurrence frequency, as well as the life cycle cost (LCC). METHODS : Addictive in the two different formations of the liquid anti-stripping Agent and powder Hydrated-Lime was applied in this investigation in order to obtain relatively clear results according to their types and conditions. Firstly, the moisture conditions were set, and applied to the porous HMA mixtures with hydrated lime (anti-stripping agent). Next, it was followed by a non-destructive test with the application of three freeze-thaw cycles, which were individually carried out thrice to compare the results of the dynamic moduli. Lastly, the hydrated lime effect related to moisture sensibility to porous HMA has been verified through the analysis of the modulus results regarding the change rate of dynamic modulus per n-cycle. RESULTS: It is clear from this investigation, that the dynamic modulus is inversely proportional to the change in temperature, as the graph representing the rigidity of the thermorheologically simple (TRS) material showed gradual decline of the dynamic modulus with the increase in temperature. CONCLUSIONS: The porous HMA mixture with the anti-stripping agent (hydrated Lime) has been found to be more moisture resistant to freezing and thawing than the normal porous HMA mixture. It is clear that the hydrated lime helps the HMA mixture to improve its fatigue resistance.

• 콘크리트학회지
• /
• 제9권6호
• /
• pp.185-193
• /
• 1997

본 연구는 각종 제진재료를 이용하여 진동을 억제할 수 있는 콘크리트를 개발하여 각종 건설공사에서 흔히 발생할 수 있는 진동공해문제를 억제하고자 하며 아울러 폐기물의 재활용차원에서 폐자재를 이용하여 유용한 제진콘크리트를 개발하고자 하는데 그 목적이 있다. 우선, 제진재료를 이용한 압축강도 (200kg/$\textrm{cm}^2$)이상의 콘크리트 배합비를 찾기 위하여 24배치의 예비실험을 수행하였으며, 선정된 적정배합비에 따른 제진재료를 이용한9개의 진동시험체보를 제작하여 보의 구조적 및 재료적 동적특성 즉 1차 공명진동수와 동적 휨강성 및 감쇠비를 측정하여 제진효과를 조사하였다. 그리고 압축강도에 의한 각 시험체의 균열모멘트를 추정하여 재하하중과 균열모멘트비(M/Mcr)에 따른 하중단계별 동적특성값을 살펴보았다. 제진재료로서는 라텍스(Latex), 고무분말(Rubber Powder)그리고 플라스틱 레진( Plastic Resin)등을 사용하였고, 재료적, 구조적 진동감쇠효과를 파악하고자 KS F2437규정과 진동파의 속도법을 사용하였으며, 감쇠비 측정은 Frequency Spectrum 곡선에 대한 Polynomial Curvefitting 방법과 기하학적 해석방법을 이용하여 각각의 결과를 비교.분석하였다.

• Geomechanics and Engineering
• /
• 제13권4호
• /
• pp.601-619
• /
• 2017

Cantilever retaining wall movements generally depend on the intensity and duration of ground motion, the response of the soil underlying the wall, the response of the backfill, the structural rigidity, and soil-structure interaction (SSI). This paper investigates the effect of material properties on seismic response of backfill-cantilever retaining wall-soil/foundation interaction system considering SSI. The material properties varied include the modulus of elasticity, Poisson's ratio, and mass density of the wall material. A series of nonlinear time history analyses with variation of material properties of the cantilever retaining wall are carried out by using the suggested finite element model (FEM). The backfill and foundation soil are modelled as an elastoplastic medium obeying the Drucker-Prager yield criterion, and the backfill-wall interface behavior is taken into consideration by using interface elements between the wall and soil to allow for de-bonding. The viscous boundary model is used in three dimensions to consider radiational effect of the seismic waves through the soil medium. In the seismic analyses, North-South component of the ground motion recorded during August 17, 1999 Kocaeli Earthquake in Yarimca station is used. Dynamic equations of motions are solved by using Newmark's direct step-by-step integration method. The response quantities incorporate the lateral displacements of the wall relative to the moving base and the stresses in the wall in all directions. The results show that while the modulus of elasticity has a considerable effect on seismic behavior of cantilever retaining wall, the Poisson's ratio and mass density of the wall material have negligible effects on seismic response.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2004년도 정기총회 및 제6최 특별 심포지움
• /
• pp.25-48
• /
• 2004

구조물의 시간경과에 따른 변형 및 성능저하 현상은 인위적 요인 및 시간경과에 따른 지반상태의 변화 혹은 지반 변위요인의 누적에 의해 발생한다. 본 연구에서는 경상남도 경주시에 위치한 첨성대를 연구대상으로 설정하였다. 첨성대는 약 1,300여 년 전 건립된 석축구조물로서 지반침하로 약간 기울어져 있으며, 일부 석재 사이의 틈이 벌어져 있는 상태이다. 본질적인 대책수립을 위하여 본 연구에서는 이러한 목적을 위하여 3차원 레이저스캐닝시스템에 의한 (형상)역공학적 연구, 물리탐사에 의한 지반공학적 특성 연구 및 고유진동수 측정에 의한 첨성대의 동적특성 등의 다음과 같은 연구들을 수행하였다. 첫째, 정밀측량에 의한 첨성대의 정밀한 변형량 측정 및 지속적인 변위측정을 위하여 3차원 레이저 스캐닝에 의한 첨성대의 3차원 공간위치정보를 취득하여 형상역공학에 의한 3차원 벡터이미지 형상구현 및 첨성대의 크기, 변위량, 변위방향 등 여러 가지 제원을 구하고자 하였다. 둘째, 다양한 비파괴적 물리탐사 방법들을 적용하여 첨성대 및 주변 지반의 물성분포 및 지반특성을 파악하고자 하였다. 한편, 다양한 물리탐사를 통하여 향후 유사한 조사에 있어서 적절한 물리탐사 방법을 제시하고자 하였다. 셋째, 경주 첨성대의 1/10 모형에 대한 동적특성실험 및 실물에 대한 고유진동수 측정을 통해 첨성대의 구조적 특성을 연구하여 첨성대의 구조특성 및 상태판단 및 동적특성 파악에 의한 내진성능을 판단하고자 하였다.

• Steel and Composite Structures
• /
• 제39권1호
• /
• pp.95-107
• /
• 2021

In this work, the dynamic response of functionally graded beams on variable elastic foundations is studied using a novel higher-order shear deformation theory (HSDT). Unlike the conventional HSDT, the present one has a new displacement field which introduces undetermined integral variables. The FG beams were assumed to be supported on Winkler-Pasternak type foundations in which the Winkler modulus is supposed to be variable in the length of the beam. The variable rigidity of the elastic foundation is assumed to be linear, parabolic and sinusoidal along the length of the beam. The material properties of the FG porous beam vary according to a power law distribution in terms of the volume fraction of the constituents. The equations of motion are determined using the virtual working principle. For the analytical solution, Navier method is used to solve the governing equations for simply supported porous FG beams. Numerical results of the present theory for the free vibration of FG beams resting on elastic foundations are presented and compared to existing solutions in the literature. A parametric study will be detailed to investigate the effects of several parameters such as gradient index, thickness ratio, porosity factor and foundation parameters on the frequency response of porous FG beams.

• Computers and Concrete
• /
• 제14권3호
• /
• pp.299-313
• /
• 2014

Effects of polypropylene (PP) fibers, steel fibers (SF) and hybrid on the properties of highstrength fiber reinforced self-consolidating concrete (HSFR-SCC) under different volume contents are investigated in this study. Comprehensive laboratory tests were conducted in order to evaluate both fresh and hardened properties of HSFR-SCC. Test results indicated that the fiber types and fiber contents greatly influenced concrete workability but it is possible to achieve self consolidating properties while adding the fiber types in concrete mixtures. Compressive strength, dynamic modulus of elasticity, and rigidity of concrete were affected by the addition as well as volume fraction of PP fibers. However, the properties of concrete were improved by the incorporation of SF. Splitting tensile and flexural strengths of concrete became increasingly less influenced by the inclusion of PP fibers and increasingly more influenced by the addition of SF. Besides, the inclusion of PP fibers resulted in the better efficiency in the improvement of toughness than SF. Furthermore, the inclusion of fibers did not have significant effect on the durability of the concrete. Results of electrical resistivity, chloride ion penetration and ultrasonic pulse velocity tests confirmed that HSFR-SCC had enough endurance against deterioration, lower chloride ion penetrability and minimum reinforcement corrosion rate.

• 대한토목학회논문집
• /
• 제13권3호
• /
• pp.59-67
• /
• 1993

부분구조법(部分構造法)으로 프리스트레스드 콘크리트 원자로격납건물(原子爐格納建物)의 지진에 대한 확률위험도분석이나 내진 안전여유평가시 상부구조에 관한 입력자료(入力資料)가 되는 구조물(構造物)의 고유전동수와 구조물 상부에서의 최대가 속도값의 구조변수(構造變數)에 대한 변동성이 연구되었다. 본 연구는 먼저 구조모델의 고유진동수에 가장 큰 영향을 미치는 구조변수를 결정하기 위하여 각 구조변수(構造變數)의 상대적(相對的) 민감도(敏感度)를 분석(分析)하였고, 각 변수의 결정에 포함될 수 있는 불확실성(不確實性)의 정도를 고려하여 Monte Carlo 수치모형실험을 수행하였다. 최대 가속도값의 변화는 직접적분(直接積分)에 의한 시간이력곡선법으로 분석되었다. 연구결과로 첫번째모드의 고유 진동수와 건물 정상부의 최대가속도값은 각 변수중 탄생계수의 영향을 가장 크게 받으며, 결정론적 방법으로 구한 값과 비교할 때 확률론적 방법으로 구한 값(평균+표준편차)은 (+)12% 정도 변함을 알 수 있다. 또한 휨강성의 불확실성을 고려하면 동적응답은 (-)4%~(+)14% 정도 달라진다.

• 지질공학
• /
• 제8권2호
• /
• pp.131-143
• /
• 1998

본 연구는 충청남도 논산군 벌곡면 일대 즉 벌곡면 도산리와 수락리에 발달한 지하수 충진지역을 대상으로 하였다. 조사 지역의 수계는 남북 방향으로 발달되어 있으며, 지질은 가장 고기에 해당하는 옥천계 창리층(Och)이 중앙부에 위치하며, 본 지역의 서쪽의 경상계 유천층군에 대비되는 응회암(Kslt)은 동쪽의 화강암(Kqb)과 북쪽의 석영반암(Kgf)에 의하여 관입 되었다. 각 지역에서 측정된 약 3000개의 절리면을 경사 방향과 각도를 구면투영하여 통계학적으로 우세한 방향을 찾아본 결과 화강암의 경우는 dipdirection/dip이 228~257/73~88, 010~150/70~85 두방향이, 창리층의 경우는 134~164/40~90, 214~249/55~89, 응회암은 291~332/75~82, 235~241/73~71의 방향이 우세하였다. 그러나 북부에 소규모로 분포하는 석영반암은 뚜렷한 방향성을 나타내지 않았다. 기반암에서의 P파 전달속도를 측정하여 최대치와 최소치를 비교한 결과 석영반암은 $5000(240)~2380(360^{\circ})m/s$로, 화강암은 $3846(210^{\circ})~1408(150^{\circ})m/s$ 응회암은 $5000(360^{\circ})~2323(150^{\circ})m/s$, 창리층 지역에서는 $6667(180^{\circ})~2000(030^{\circ})m/s$로 나타났다. 암석의 공학적 성질은 시료를 26면체의 시편으로 제작한후 각 방향별 동탄성계수 즉 뽀아송의 비, 강성률, 영률, 체적탄성률을 산출하여 야외에서 측정된 자료와 비교 분석 하였다.