• Fibers and Polymers
• /
• 제6권2호
• /
• pp.146-150
• /
• 2005

In this paper, friction of air-jet textured yams is investigated. Using a friction measuring apparatus fabricated inhouse, dynamic friction forces of the yams under yarn-to-metal (YM) and yam-to-yam (YY) rubbing modes are measured. The influence of processing variables of air-jet texturing viz., overfeed, air pressure, dry/wet texturing and normal/core-and-effect texturing on dynamic friction is analysed. The results indicate that friction force increases with increasing rubbing speeds and yam input tension. YM dynamic friction decreases initially and then starts to increase at higher overfeeds. YY dynamic friction increases with increasing overfeed. YM dynamic friction decreases with an increase in air pressure while an opposite trend is observed for YY friction. Wet textured yams have higher friction than dry textured yams. Core wetted coreand-effect textured yams have higher friction than normal textured yams.

• Transactions on Control, Automation and Systems Engineering
• /
• 제4권4호
• /
• pp.296-304
• /
• 2002

A position tracking control schemes on the precise mechanical system in presence of nonlinear dynamic friction is proposed. A nonlinear dynamic friction is regarded as the bristle friction model to compensate effects of friction. The conventional sliding mode controller often has been used as a non-model-based friction controller, but it has a poor tracking performance in high-precision position tracking application since it completely cannot compensate the friction effect below a certain precision level. Thus to improve the precise position tracking performance, we propose the sliding mode control method combined with the friction-model-based observer having tunable structure of the transient response. Then this control scheme has a good transient response as well as the high precise tracking performance compared with the conventional sliding mode control without observer and the control system with similar type of observer. The experiments on the bali-screw drive table with the nonlinear dynamic friction show the feasibility of the proposed control scheme.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.208.2-212
• /
• 1997

In a model based friction comensation for a frictional system,the performance of the system is inflenceed by the selection of the friction model. Especially, when a real plant have dynamic friction characteritics, the compensation of friction with a static friction model may deteriorate the perfomance. For the system we constlucted an adaptiv parameter estimation and friction compensation with a newly introduced dynamic friction model proposed by Canudas et.[1]. The model depicts varios frictional phenomena,such as Stibeck effect,frictional memory, Stick-slip motion. Parmeter identification algorithm are followed conventional RLSM adaptive rule. The stability for the closed system was proved by the Lyapunov stability. The result say that if a real system have dynamic friction property,the friction compensation with the dynamic friction model will improve the perfomance moreover static friction model based compensation may lead to the system unstable.

• 한국정밀공학회지
• /
• 제19권6호
• /
• pp.51-61
• /
• 2002

A tracking control scheme on the XY ball-screw drive system in the presence of nonlinear dynamic friction is proposed. A nonlinear dynamic friction is regarded as the Lund-Grenoble friction model to compensate effects of friction. The conventional VSC method that often has been used as a non-model-based friction controller has poor tracking performance in high-precision position tracking application since it cannot compensate the friction effect below a certain precision level completely. Thus to improve the precise position tracking performance, we propose the integral type VSC method combined with the friction-model-based observer. Then this control scheme has the high precise tracking performance compared with the non-model-baked VSC method and the PID control method with a similar observer. This fact is shown through the experiment on the XY ball-screw drive system with the nonlinear dynamic friction.

• 한국지반공학회논문집
• /
• 제17권6호
• /
• pp.207-213
• /
• 2001

조밀한 건조조립토와 건설재료(콘크리트재)사이의 경계에서의 동마찰계수를 구하기 위하여 진동대를 사용하여 동적직접전단시험을 실시하였다. 조밀한 건조조립토와 건설재료사이의 동마찰계수는 본 연구에서 고려한 미끄러짐 속도의 범위안에서는 크게 변하지 않음을 알 수 있었다. 그리고 동마찰계수는 조립토의 평균입경이 증가함에 따라 감소하였고, 이에 대한 관계식을 제안하였다. 또한 이 계수를 같은 조립토에 대하여 실시한 평면변형률시험으로 얻어진 내부마찰각으로부터의 마찰계수와 비교하였다.

• 한국소음진동공학회논문집
• /
• 제18권11호
• /
• pp.1111-1117
• /
• 2008

During the dynamic analysis of a system, the Coulomb friction law is emploved to calculate the friction force. Since the static friction coefficient is only employed during the zero relative velocity, it is impractical to employ the coefficient during the dynamic analysis. To calculate the static friction force, therefore, some friction models have been developed. In this study, the integration stability and the accuracy of the models are investigated with some numerical examples. The effect of time step size during the numerical integration is also investigated. The numerical study shows that the friction model employed for most commercial codes is not as good as the one proposed in this study.

• 전자공학회논문지
• /
• 제51권1호
• /
• pp.202-208
• /
• 2014

로봇 시스템에 작용하는 마찰력은 비선형 형태이며 특히 저속에서의 정밀 제어를 어렵게 만든다. 본 논문에서는 로봇 연구에서 자주 활용되고 있는 벤치마크 로봇 시스템의 단축 모델에 대한 동적 마찰 보상 문제를 다룬다. 마찰 모델은 동적 특성 및 다양한 효과를 나타낼 수 있도록 비선형 동적 모델인 LuGre 모델을 고려한다. 본 논문에서 제안하는 제어기는 두 부분으로 구성된다. 동적 마찰의 추정 및 보상을 위해 Dual 관측기 기반의 적응 제어기를 사용한다. 마찰 추정 오차 및 나머지 외란을 보상하기 위해 PI 관측기를 추가로 설계한다. 모의실험을 통해 비선형 동적 마찰이 벤치마크 로봇 시스템의 제어 성능에 미치는 영향을 확인하고 제안된 제어기를 사용함으로써 동적 마찰에 대한 제어 성능이 향상됨을 보인다.

• Tribology and Lubricants
• /
• 제14권3호
• /
• pp.65-73
• /
• 1998

A dynamic analysis and friction loss of non-variable swash plate compressor are studied theoretically. Rotating swash plate and reciprocating pistons are modelled kinematically, and forces and torques acting on rotor-bearing system are analyzed. Then, friction losses on 4 roller bearings, 10 sliding parts between swash plate and shoes, and 10 lubricating surfaces between cylinders and pistons are calculated. On each frictional element of sliding surfaces and roller bearings, the same friction loss is obtained, respectively.

• 한국소음진동공학회논문집
• /
• 제12권11호
• /
• pp.904-913
• /
• 2002

In this study, a dynamic analysis of the reciprocating compression mechanism considering viscous friction force of a piston used in small refrigeration compressors is performed. The length of cylinder in this class of compressors is shortening to diminish the frictional losses of the piston-cylinder system. So, the contacting length between piston and cylinder liner is in variable with the rotating crank angle around the BDC of the reciprocating piston. In the problem formulation of the compression mechanism dynamics, the change in bearing length of the piston and all corresponding viscous forces and moments are considered in order to determine the trajectories of piston and crankshaft. The piston orbits for viscous friction model and Coulomb friction model were used to compare the effect of the friction forces of piston on the dynamic trajectories of piston. To investigate the effect of friction force acting on the piston for the dynamic characteristics of crankshaft, comparison of the crankshaft loci is given in both viscous model and Coulomb model. Results show that the viscous friction force of piston must be considered in calculating for the accurate dynamic characteristics of the reciprocating compression mechanism.

• 한국정밀공학회지
• /
• 제25권12호
• /
• pp.89-99
• /
• 2008

In this paper, the position tracking control problem of the servo system with nonlinear dynamic friction is issued. The nonlinear dynamic friction contains a directly immeasurable friction state variable and the uncertainty caused by incomplete parameter modeling and its variations. In order to provide the efficient solution to these control problems, we propose the composite control scheme, which consists of the robust friction state observer, the FNN approximator and the approximation error estimator with sliding mode control. In first, the sliding mode controller and the robust friction state observer is designed to estimate the unknown internal state of the LuGre friction model. Next, the FNN estimator is adopted to approximate the unknown lumped friction uncertainty. Finally, the adaptive approximation error estimator is designed to compensate the approximation error of the FNN estimator. Some simulations and experiments on the servo system assembled with ball-screw and DC servo motor are presented. Results show the remarkable performance of the proposed control scheme. The robust friction state observer can successfully identify immeasurable friction state and the FNN estimator and adaptive approximation error estimator give the robustness to the proposed control scheme against the uncertainty of the friction parameters.