• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.10
• /
• pp.3750-3770
• /
• 2021

This study investigates open-source dynamic XSS filters used as security devices in web applications to account for the effectiveness of filters in protecting against XSS attacks. The experiment involves twelve representative filters, which are examined individually by placing them into the final output function of a custom-built single-input-form web application. To assess the effectiveness of the filters in their tasks of sanitizing XSS payloads and in preserving benign payloads, a black-box testing method is applied using an automated XSS testing framework. The result in working with malicious and benign payloads shows an important trade-off in the filters' tasks. Because the filters that only check for dangerous or safe elements, they seem to neglect to validate their values. As some safe values are mistreated as dangerous elements, their benign payload function is lost in the way. For the filters to be more effective, it is suggested that they should be able to validate the respective values of malicious and benign payloads; thus, minimizing the trade-off. This particular assessment of XSS filters provides important insight regarding the filters that can be used to mitigate threats, including the possible configurations to improve them in handling both malicious and benign payloads.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.6
• /
• pp.413-419
• /
• 2003

The objective of this paper is to survey and put in perspective the existing methods of dynamic filter development. This includes theories and practices for linear and nonlinear filters, multiple model filters, and data association methods for tracking in multitarget environment. The presentation of this paper is motivated by recent surge of interest in the area of designing feedback control systems with reduced number of sensors, detection and identification of abrupt changes, and multitarget tracking in clutter. It is hoped to be useful in view of the need to take a grasp of existing techniques before using them in practice and developing new techniques.

• IE interfaces
• /
• v.10 no.1
• /
• pp.47-55
• /
• 1997

This paper deals with an assembly process of the TFT glasses and the color filters in LCD manufacturing. Two specific problems are presented and solved. One is a matching problem to find the best matches between a set of TFT glasses and a set of color filters, which result in the maximum number of good LCD assemblies. A simple mathematical model is constructed for this problem and an optimal solution can be obtained using an existing algorithm. The other is a main problem that requires a determination of an economic lot size of the color filters which are going to be assembled with a given set of TFT glasses. A Bayesian dynamic forecasting model is developed to predict the defective patterns of color filters. Based on the predicted defective rate of color filters, the minimum lot size of the color filters can be determined to minimize the probability of losing good TFT glasses and color filters.

• Journal of Power Electronics
• /
• v.9 no.3
• /
• pp.430-437
• /
• 2009

This paper presents the dynamic characteristics of buck and buck-boost dc-dc converters with digital filters. At first, the PID, the minimum phase FIR filter and the IIR filter controls are discussed in the buck dc-dc converter. Comparisons of the dynamic characteristics between the buck and buck-boost converters are then discussed. As a result, it is clarified that the superior dynamic characteristics are realized in the IIR filter method. In the buck converter, the undershoot is less than 2% and the transient time is less than 0.4ms. On the other hand, in the buck-boost converter, the undershoot is about 3%. However, the transient time is approximately over 4ms because the output capacitance is too large to suppress the output voltage ripple in this type of converter.

• Progress in Medical Physics
• /
• v.9 no.2
• /
• pp.77-88
• /
• 1998

Wedge shaped isodoses are desired in a number of clinical situations. Hard wedge filters have provided nominal angled isodoses with dosimetric consequences of beam hardening, increased peripheral dosing, nonidealized gradients at deep depths along with the practical consequendes of filter handling and placement problems. Dynamic wedging uses a combination of a moving collimator and changing monitor dose to achieve angled isodoses. The segmented treatment tables(STT) that monitor unit setting by every distance of moving collimator, was induced by numerical formular. The characteristics of dynamic wedge by STT compared with real dosimetry. Methods and Materials : The accelerator CLINAC 2100C/D at Yonsei Cancer Center has two photon energies (6MV and 10MV), currently with dynamic wedge angles of 15$^{\circ}$, 30$^{\circ}$, 45$^{\circ}$ and 60$^{\circ}$. The segmented treatment tables(STT) that drive the collimator in concert with a changing monitor unit are unique for field sizes ranging from 4.0cm to 20.0cm in 0.5cm steps. Transmission wedge factors were measured for each STT with an standard ion chamber. Isodose profiles, isodose curves, percentage depth dose for dynamic wedge filters were measured with film dosimetry. Dynamic wedge angle by STT was well coincident with film dosimetry. Percent depth doses were found to be closer to open field but more shallow than hard wedge filter. The wedge transmission factor were decreased by increased the wedge angle and more higher than hard wedge filters. Dynamic wedging probided more consistent gradients across the field compared with hard wedge filters. Dynamic wedging has practical and dosimetric advantages over hard filters for rapid setup and keeping from table collisions. Dynamic wedge filters are positive replacement for hard filters and introduction of dynamic conformal radiotherapy and intensity modulation radiotherapy in a future.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.1
• /
• pp.123-132
• /
• 1987

In this paper, we studied on the design of elliptic digital filters using the bilinear z transformation method, and proposed a design procedure satisfying prescribed specifications. The magnitude characteristics of digital filters are compared with its of analog filiters by computer simulation. Finaly we considered the quantization effects of digital filters. In cascader realization of fixed-point digital filters under dynamic range constraints, the outpout noise for IIR digital filters depends on the pole-zero pairing and ordering of the second order sections. Therfore an optmization procedure to finding a good ordering and pairing is very desirable. Thus, we proposed a sub-optimization procedure for finding "near optimal" solution.

• Journal of the Optical Society of Korea
• /
• v.18 no.3
• /
• pp.244-250
• /
• 2014

Due to the difficulty in measuring very low out-of-band cutoff depths of solar blind UV filters, we propose a cutoff depth adjustable measurement system (CDAM) to test deep cutoff filters with a large dynamic range. The CDAM utilizing the substitution method is elaborately composed of several parts, including narrow-band LED light sources, standard reflective neutral attenuators with known attenuation coefficients, and a photomultiplier (PMT). This paper also presents an attenuator combination method ensuring that the PMT works within its linear response range. In addition, numerical simulation testifies to the method, and experiment shows that the CDAM system can achieve an extension of dynamic range from 0-6 OD to 0-10 OD, which is sufficient for the measurement of out-of-band cutoff depths of solar blind UV filters. Above all, the CDAM system, being easily implemented, of wide dynamic range, and highly precise, could be widely used in the measurement of filter cutoff depth.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.1
• /
• pp.78-85
• /
• 1999

In this paper we propose a method to improve the performance of the mel-cepstrum that is widely used in speech recognition. Typically, the met-cepstrum is obtained by critical band filters that have fixed center spacing and bandwidth. However different filter characteristics produce a different mel-cepstrum, resulting in a different performance. In this paper we analyze triangular-shaped and rectangular-shaped filters. By changing the characteristics of filters such as center frequency and bandwidth, we analyze the performance of the met-cepstrum. Then utilizing the simplex method, we propose a method to optimize the critical band filters. Using the dynamic time warping, we performed speaker independent recognition experiments with Korean digit words pronounced by 10 males and 10 females. Experiments show that the rectangular-shaped filters show good performance and the mel-cepstrum obtained by the optimized filters shows better performance than filters that have fixed center spacing and bandwidth.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.10 no.5
• /
• pp.250-257
• /
• 1985

High order filters are usually realized by cascading second order stages. In this paper, a simple method of pole-zero pairing in the high order band-pass and band-reject filter realization of the elliptic functions is proposed for the enhancement of overall dynamic range. Futrhermore, the optimum sequence of the various biquads of high-pass notch, low-pass notch and symmetrical notch etc., is developed for the elliptic band-pass and band-reject filters.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.3
• /
• pp.261-273
• /
• 2016

Reconfigurable finite impulse response (FIR) filters whose filter coefficients and filter order change dynamically during run-time play an important role in the software defined radio (SDR) systems, multi-channel filters, and digital up/down converters. However, there are not many reports on such reconfigurable designs which can support dynamic variation of filter order and filter coefficients. The purpose of this paper is to provide an architectural solution for the FIR filters to support run-time variation of the filter order and filter coefficients. First, two straightforward designs, namely, (i) single-MAC based design and (ii) full-parallel design are presented. For large variation of the filter order, two designs based on (iii) folded structure and (iv) fast FIR algorithm are presented. Finally, we propose (v) high throughput design which provides significant advantage in terms of hardware and/or time complexities over the other designs. We compare complexities of all the five structures, and provide the synthesis results for verification.