• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2009.06a
• /
• pp.187-187
• /
• 2009

Opening of fractures induced by shear dilation or normal deformation can be a significant source of fracture permeability change in fractured rock, which is important for the performance assessment of geological repositories for spent nuclear fuel. As the repository generates heat and later cools the fluid-carrying ability of the rocks becomes a dynamic variable during the lifespan of the repository. Heating causes expansion of the rock close to the repository and, at the same time, contraction close to the surface. During the cooling phase of the repository, the opposite takes place. Heating and cooling together with the, virgin stress can induce shear dilation of fractures and deformation zones and change the flow field around the repository. The objectives of this work are to examine the contribution of thermal stress to the shear slip of fracture in mid- and far-field around a KBS-3 type of repository and to investigate the effect of evolution of stress on the rock mass permeability. In the first part of this study, zones of fracture shear slip were examined by conducting a three-dimensional, thermo-mechanical analysis of a spent fuel repository model in the size of 2 km $\times$ 2 km $\times$ 800 m. Stress evolutions of importance for fracture shear slip are: (1) comparatively high horizontal compressive thermal stress at the repository level, (2) generation of vertical tensile thermal stress right above the repository, (3) horizontal tensile stress near the surface, which can induce tensile failure, and generation of shear stresses at the comers of the repository. In the second part of the study, fracture data from Forsmark, Sweden is used to establish fracture network models (DFN). Stress paths obtained from the thermo-mechanical analysis were used as boundary conditions in DFN-DEM (Discrete Element Method) analysis of six DFN models at the repository level. Increases of permeability up to a factor of four were observed during thermal loading history and shear dilation of fractures was not recovered after cooling of the repository. An understanding of the stress path and potential areas of slip induced shear dilation and related permeability changes during the lifetime of a repository for spent nuclear fuel is of utmost importance for analysing long-term safety. The result of this study will assist in identifying critical areas around a repository where fracture shear slip is likely to develop. The presentation also includes a brief introduction to the ongoing site investigation on two candidate sites for geological repository in Sweden.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.11
• /
• pp.1349-1354
• /
• 2013

Sealing structure to prevent flowing hot gas into the driving device, located between the driving shaft and the liner of On-Off valve for controlling the hot gas flow path was studied. Wear occurs due to the constant movement of the driving shaft controlled by actuator on graphite as the sealing material. In this paper, the dynamic wear behavior in high temperature of graphite(HK-6) to be used as sealing material was evaluated. Reciprocating wear test was carried out for the graphite(HK-6) to the relative motion between shaft materials(W-25Re). The results of friction coefficient and specific wear rate according to contact load, sliding speed at room temperature and $485^{\circ}C$ considering the actual operating environment were evaluated. Through the SEM analysis of the worn surface, third body as lubricant films were observed and lubricant effect of third body was considered.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.120-120
• /
• 2011

Graphene is a carbon based material and it has great potential of being utilized in various fields such as electronics, optics, and mechanics. In order to develop graphene-based logic systems, graphene field-effect transistor (GFET) has been extensively explored. GFET requires supporting devices, such as volatile memory, to function in an embedded logic system. As far as we understand, graphene has not been studied for volatile memory application, although several graphene non-volatile memories (GNVMs) have been reported. However, we think that these GNVM are unable to serve the logic system properly due to the very slow program/read speed. In this study, a GVM based on the GFET structure and using an engineered graphene channel is proposed. By manipulating the deposition condition, charge traps are introduced to graphene channel, which store charges temporarily, so as to enable volatile data storage for GFET. The proposed GVM shows satisfying performance in fast program/erase (P/E) and read speed. Moreover, this GVM has good compatibility with GFET in device fabrication process. This GVM can be designed to be dynamic random access memory (DRAM) in serving the logic systems application. We demonstrated GVM with the structure of FET. By manipulating the graphene synthesis process, we could engineer the charge trap density of graphene layer. In the range that our measurement system can support, we achieved a high performance of GVM in refresh (>10 ${\mu}s$) and retention time (~100 s). Because of high speed, when compared with other graphene based memory devices, GVM proposed in this study can be a strong contender for future electrical system applications.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.8
• /
• pp.699-705
• /
• 2015

Aircraft needs high lift-to-drag ratio and weight reduction of the structure for long endurance flight with a small power. Generally high aspect ratio wing is applied to HALE(High Altitude Long Endurance) aircraft. Also high modulus, and high strength CFRP(Carbon Fiber Reinforced Plastic) has been used in primary structures. and thin mylar(membrane material) film has been applied to skin of wing. As a result, wing is more flexible than the other structures. and the stiffness of thin mylar film has an affect on dynamic stability. In this study, the membrane characteristic of mylar film has been simulated using nonlinear gap elements. And equivalent modeling method using shell elements is presented using the nonlinear simulation result. The linear equivalent model has verified using the results of nonlinear membrane method. Proposed linear equivalent shell model has applied to mode analysis for estimate the effect of mylar mechanical properties on natural frequency.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.28 no.6
• /
• pp.361-374
• /
• 2016

When the seabed around and under gravity structures such as submerged breakwater is exposed to a large wave action long period, the excess pore pressure is generated significantly due to pore volume change associated with rearrangement soil grains. This effect leads a seabed liquefaction around and under structures as a result from decrease in the effective stress, and the possibility of structure failure is increased eventually. These facts shown above have been investigated in the previous studies related to regular and irregular waves. This study suggested a concrete mat for preventing the seabed liquefaction near the submerged breakwater. The concrete mat was mainly used as a countermeasure for scouring protection in riverbed. According to installation of the concrete mattress, the time and spatial series of the deformation of submerged breakwater, the pore water pressure, and the pore water pressure ratio in the seabed were investigated. Their results were also compared with those of the seabed unprotected with the concrete mat. The results presented were confirmed that the liquefaction potential of seabed under the concrete mattress is significantly reduced under regular wave field.

• Economic and Environmental Geology
• /
• v.44 no.4
• /
• pp.289-302
• /
• 2011

Since the frequency of the earthquake occurrence in Korean peninsular is continuously increasing, the possibility that massive landslides are triggered by earthquake is also growing in Korea. Previously, the landslide is known to be induced by large magnitude earthquake, whose magnitude is larger than 6.0. However, the landslide can be induced by only small magnitude earthquake, especially in the fully saturated soil. Therefore, the susceptibility of landslide caused by small magnitude earthquake in fully saturated soil is analyzed in this study. For that, the topographical and geological characteristics of the site were obtained and managed by GIS software. In the procedure of the study, slope angle, cohesion, friction angle, unit weight of soil were obtained and constructed as a spatial database layer. Combining these data sets in a dynamic model based on Newmark's displacement analysis, the landslide displacements were estimated in each grid cell. In order to check out the possibility of the earthquake induced landslides, the level of the groundwater table is varied from dry to 80% saturated soil. In addition, in order to analyze the effect of the magnitude of earthquake and distance to epicenter, four different earthquakes epicenters were considered in the study area.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.4
• /
• pp.107-115
• /
• 2011

In this study, the vibration analysis of the underground box structures induced train movement is studied. In order to perform these analysis, dynamic data, which was measured when subway is in service, are gained by attaching accelerometers on the structure such as lower beam, lateral wall and upper slab. Also, accelerometers are attached on the lower beams and side walls of the gravel ballast and concrete ballast sections in order to compare vibration due to ballast materials. The vibration results of upper slabs and lower beams reveal that the vibration on the upper slabs is greater than the lower beams. Also, the results of the crack gauge on the upper slab show that crack width dose not change due to vibration, These means that the effect of the vibration on the structure is very limited. In order to evaluate the vibration of the structure, acceleration unit is converted to velocity unit comparing with the existing velocity data gained from the platforms.

• Journal of Life Science
• /
• v.25 no.5
• /
• pp.601-606
• /
• 2015

Hutchinson (1961) proposed that the large number of species in most plankton communities is remarkable in review of the competitive exclusion principle, which suggests that in homogeneous, well-mixed environments species that compete for the same resources cannot coexist. The principle of competitive exclusion would lead us to conclude that only a few species could coexist in such circumstances. Nevertheless, numerous competing species in most natural habitats are able to coexist, while generally only few resources (niches) limit these communities. It is coined “the paradox of plankton” by Hutchinson. We reviewed some literature of the proposed solutions and give a brief overview of the mechanisms proposed so far. The proposed mechanisms that we discuss mainly include spatial and temporal heterogeneity in physical and biological environment, externally imposed or self-generated spatial segregation, horizontal mesoscale turbulence of ocean characterized by coherent vortices, oscillation and chaos generated by several internal and external causes, stable coexistence and compensatory dynamic under fluctuating temperature in resource competition, and finally the role of toxin-producing phytoplankton in maintaining the coexistence and biodiversity of the overall plankton populations. Especially we sited Roy and Chattopadhyay’s reviews and their toxin-producing hypothesis by phytoplankton. This review may be some information to study plankton communities and effect to put the solutions to the paradox that have been proposed over the years into perspective.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.32 no.2
• /
• pp.142-150
• /
• 2006

PURPOSE : The 3rd molar extraction of mandible is common in out-patient office of oral and maxillofacial surgery. And it is dynamic minor operation with changes of vital signs. most of patients are already sensitive about their dental treatment. The changes of emotion are reached to the highest level when patients is laid down to be treated on unit chair. It can be induced to undesirable accidents as to this fear. The undesirable complications are nausea, vomiting, hyperventilation, dyspnea, syncope, shock and so on. The severe changes of vital signs may influence their behavior and make serious medical malpractice or suit such as fracture of dental instruments and injury of proximal area. METHOD AND PATIENTS : A total of 99 selected normal patients were reviewed. Among this, 70 patients(43 men, 27 women with statistical significance) were included in this study. Each steps(pre-anesthesis, 5 minutes after anesthesis, just after mucogingival incision, just after tooth section, just after suture and gauze biting) were investigated for a change of a vital signs. It is analyzed to 2 categories,"Means" and "Tendency". The "Means" is the amount of vital signs changed in comparison with pre-step during operation. That means is the amount of vital changes by each step operation. Next, " Tendency" is changes of vital signs in comparison with step1 during operation. RESULT : This is the changing tendency of vital signs with time. That is active effect of fear and pain. Thus this "Means" and "Tendency" will present a sudden changes of vital signs and it can lead to more safe treatment. CONCLUSION : Thus, the purpose of this study is, through careful operation in each step, to less on patients' complication and increase trust between patient and OMFS. This study is a first article shown with the amount of "Means" and "Tendency" in vital signs, when a third molar of mandible is extracted. This study will be base study of patients with general diseases, because it selected only patients without general diseases.

• The Journal of Korean Physical Therapy
• /
• v.11 no.3
• /
• pp.71-79
• /
• 1999

본 연구의 목적은 균형 훈련이 중추신경계 손상자들의 자세 조절 및 중추감각신경전도로에 미치는 영향을 규명하는데 있다. 연구대상자는 중추신경계 손상자로써 실험군 10명, 통제군 10명 등 총 20명을 선정하였으며, 실험군은 본 연구의 훈련 프로그램에 따라 12주간 force platform을 이용하여 균형훈련을 실시토록하였다. 자세조절 변인의 측정은 운동처치 전, 처치 후 8주 및 12주 후에 대상자들의 동적 및 정적 자세에서의 흔들림을 Dynamic Balance System을 이용하여 측정하였고, 체성감각 유발전위의 말초신경 근위부 유발전위$(N_9)$ 잠복기, 척수 유발전위$(N_{13})$ 잠복기, 뇌 유발전위 $(N_{20})$ 잠복기는 Neurotec을 이용하여 측정 분석한 결과 다음과 같은 결론을 얻었다. 1. 정적 자세 조절 요인의 경우, 좌우 흔들림과 전후 흔들림은 실험군에서 8주 후부터 유의하게 (p<.05) 감소하였고, 실험군이 통제군에 비해 운동처치 8주 및 12주 후에 각각 유의하게(P<.05, P<.01) 흔들림이 감소하였다. 2. 전후 이동면과 전후 기울기면에서 동적 자세 조절의 변화는 전후 이동면에서 좌우 흔들림과 전후 흔들림은 실험군에서 8주 후부터 유의하게 (P<.05) 감소하였으며, 실험군이 통제군에 비해 운동처치 8주 및 12주 후에 각각 유의하게 (P<.05, p<.01) 흔들림이 감소하였다. 3. 체성감각 유발전위의 잠복기 변화는 실험군과 통제군에 있어서 말초신경 근위부 유발전위$(N_9)$ 잠복기와 척수 유발전위$(N_{13})$ 잠복기가 다소 증가하였으나 유의한 차이는 나타나지 않았으며, 실험군에 있어서 뇌 유발전위 $(N_{20})$ 잠복기는 8주 후부터 유의하게 (P<.05) 증가하였다. 이상의 결과를 종합해 볼 때, 12주의 균형 훈련은 자세 조절에 있어서 전후와 좌우의 흔들림을 감소시킴으로써 정적인 상태나 동적인 상태에서의 자세 안정성을 증가시킬 수 있음을 시사하고 있다. 이는 자세 조절에 필요한 항중력근의 긴장성 수축을 유발시킬 뿐만 아니라 근육 긴장분포를 조절할 수 있다는 것으로 신경근 조절 기능의 향상을 의미하는 것으로 사료된다. 또한 뇌 유발전위 $(N_{20})$ 잠복기의 증가는 중추신경계의 감각기능의 신경학적 회복을 의미하는 것으로 중추신경계의 감각 운동통합에도 영향을 미쳐 운동기능의 향상을 기대할 수 이을 것으로 사료된다.