• 접착 및 계면
• /
• 제4권1호
• /
• pp.18-27
• /
• 2003

Micromechanical 시험법과 표면 젖음성 측정을 이용하여 플라즈마 처리된 생분해성 poly(p-dioxanone) (PPDO) 섬유강화 poly(L-lactide) (PLLA) 복합재료의 계면물성과 미세파괴 분해메카니즘을 연구하였다. PPDO 섬유강화 PLLA 복합재료는 장기간의 사용기간 동안 우수한 기계적 물성을 제공할 수 있다. PPDO 섬유와 PLLA 기지재료의 분해정도는 열분석과 광학적인 관찰을 통해서 확인하였다. PPDO 섬유와 PLLA 기지재료 사이의 계면전단강도와 접착일은 플라즈마 처리 시간이 60초 일때 가장 컸으며, 접착일과 polar 표면자유에너지는 계면전단강도와 비례하였다. 초기상태의 PPDO 섬유는 연성파단 형상이 나타났으나, 분해시간이 진행됨에 따라 분자량 감소로 인해 점차적으로 취성 파단 형상으로 변하였다. 계면물성과 미세파괴 분해메카니즘은 분해가 진행됨에 따라 변하기 때문에 섬유강화 생분해성 복합재료의 성능을 조절하는데 중요한 요인들이다.

• Corrosion Science and Technology
• /
• 제20권1호
• /
• pp.26-36
• /
• 2021

Pipes operating in the seawater environment faces cavitation degradation and corrosion of the metallic component, as well as a negative synergistic effect. Cavitation degradation shows the mechanism by which materials deteriorate by causing rapid change of pressure or high-frequency vibration in the solution, and introducing the formation and explosion of bubbles. In order to rate the cavitation resistance of materials, constant conditions have been used. However, while a dynamic cavitation condition can be generated in a real system, there has been little reported on the effect of ultrasonic amplitude on the cavitation resistance and mechanism of composites. In this work, 3 kinds of epoxy coatings were used, and the cavitation resistance of the epoxy coatings was evaluated in 3.5% NaCl at 15 ℃ using an indirect ultrasonic cavitation method. Eleven kinds of mechanical properties were obtained, namely compressive strength, flexural strength and modulus, tensile strength and elongation, Shore D hardness, water absorptivity, impact test, wear test for coating only and pull-off strength for epoxy coating/carbon steel or epoxy coating/rubber/carbon steel. The cavitation erosion mechanism of epoxy coatings was discussed on the basis of the mechanical properties and the effect of ultrasonic amplitude on the degradation of coatings.

• Journal of Electrochemical Science and Technology
• /
• 제15권2호
• /
• pp.253-260
• /
• 2024

Proton exchange membrane water electrolysis (PEMWE) is an efficient method for utilizing renewable energy sources such as wind and solar powers to produce green hydrogen. For PEMWE powered by renewable energy sources, its durability is a crucial factor in its performance since irregular and fluctuating characteristics of renewable energy sources, especially for wind power, can deteriorate the stability of PEMWE. Triangular voltage cycle is well able to simulate fluctuating wind power, but its effect on the durability has not been investigated extensively. In this study, the performance degradation of the PEMWE cell operated with the triangular voltage cycling was investigated at different ramping rates. The measured current responses during the cycling gradually decreased for both ramping rates, and I-V curve measurements before and after the cycling confirmed the degradation of the performances of PEMWE. For both measurements, the degradation rate was larger for 300 mV s^-1 than 30 mV s^-1, and they were determined as 0.36 and 1.26 mV h^-1 (at the current density of 2 A cm^-2) at the ramping rates of 30 and 300 mV s^-1, respectively. The comparison with other studies on triangular voltage cycling also indicate that an increase in the ramping rate accelerates the deterioration of the PEMWE performance. X-ray photoelectron spectroscopy and transmission electron microscopy results showed that the Ir catalyst was oxidized and did not dissolve during the voltage cycling. This study suggests that the ramping rate of the triangular voltage cycling is an important factor for the evaluation of the durability of PEMWE cells.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국제학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.993-998
• /
• 1988

Adaptive control system has evolved as an attempt to avoid degradation of the dynamic performance of a control system when environmental variations occurs. While the feedback control system is oriented toward the elimination of the effect of state perturbations, the adaptive control system is oriented toward the elimination of the effect of structural perturbation, upon the performances of the control system. The model reference adaptive controller is utilized in velocity loop controller for positioning and tracking is designed based on the linear decoupled dynamics.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 신호처리소사이어티 추계학술대회 논문집
• /
• pp.129-132
• /
• 2003

Fixed GOP allocation in MPEG-2 cannot cope with scene change and amount of motion, which results in degradation picture quality. By finding suitable N and M and allocating dynamic GOP, the improvement of picture quality can be achieved. In this paper, N and M are determined by scene change detection and estimation of amount of motion using color histogram per each macroblock. The simulation results show that the average PSNR is improved, especially around the shot boundaries.

• ETRI Journal
• /
• 제28권5호
• /
• pp.676-679
• /
• 2006

In this letter, we propose an adaptive hard handoff algorithm with a dynamic hysteresis value based on the received signal strength from the serving base station, for mobile cellular communication systems. A discrete-time method is presented to evaluate handoff algorithms analytically. Performance is evaluated in terms of the average number of handoffs, the probability of link degradation, and the average handoff delay. Numerical results and simulations demonstrate that the proposed algorithm outperforms the handoff algorithm with fixed hysteresis values and the handoff algorithm using both threshold and hysteresis.

• 대한기계학회논문집B
• /
• 제30권8호
• /
• pp.756-763
• /
• 2006

PEMFC has several technical problems such as water management, long term stability and performance degradation as. PEMFC has been studied not only to solve water management, but also to generate power in stable manner to system by using a hybrid system with auxiliary energy storage device. The purpose of this study is to couple PEMFC with supercapacitor to make a hybrid system and to design and test control strategies for stable power generation in case of changing output power. The polarization curve and dynamic behaviors while changing power were investigated to find out characteristics of PEMFC stack. A DC/DC converter was fabricated in order to increase fuel cell and supercapacitor voltage and to charge supercapacitor. We found that the operation strategy 2 was recommended to the system because of solving water management problem and increasing the dynamic behavior.

• Journal of Ship and Ocean Technology
• /
• 제1권1호
• /
• pp.57-72
• /
• 1997

The larger trends related to cracking in ocean going vessels (primarily tankers and bulk carriers) are reviewed on the basis of available data. The typical interrelated causes of such cracking are: high local stresses, extensive use of higher strength steels, inadequate treatment of dynamic loads, adverse operational factors (harsh weather, improper vessel handling), and controllable structural degradation (corrosion, wear, stevedore damage). Three consequences of cracking are then discussed: structural failure, pollution, and increased maintenance. The first two, while rare, are potentially of high consequence including loss of life. The types of solutions that can be employed to improve the durability of ships in the face of fatigue cracking are then presented. For existing vessels, these solutions range from repairs based on structural analysis or service experience, control of corrosion, and enhanced surveys. For new vessels, the use of advanced design procedures that specifically address dynamic loads and fatigue cracking is necessary. As the preferred solution to the problem of cracking in ships, this paper advocates prevention by explicit design by first principles.

• 대한임베디드공학회논문지
• /
• 제1권2호
• /
• pp.64-72
• /
• 2006

The long propagation delay over satellite internet causes degradation of TCP performance in slow start phase. Especially, web traffic performance is greatly reduced by low throughput in slow start phase. To improve web traffic performance, we propose the Dynamic ACK Generation Scheme which generates ACKs and considers sender RTO in PEP (Performance Enhancing Proxy). The Normal ACK generation mechanism improves TCP throughput, and also decreases sender RTO. if PEP stops generating ACKs, TCP performance will be reduced by frequent RTO expiration. To solve this problem, our scheme adjusts RTO using ACK generation interval. And it supports retransmission mechanism for loss recovery in PEP. The results of the performance analysis provide a good evidence to demonstrate the efficiency of our mechanisms over satellite internet.

• 대한임베디드공학회논문지
• /
• 제7권3호
• /
• pp.151-156
• /
• 2012

When mounting the sensor device in the way of Plug&Play, sensor device drivers need to be loaded and linked dynamically. Since a sensor node platform is based on small 8 bit MCU, dynamic loading and linking technique used in Windows and Linux can not be applied. In this paper, we present how to link and load dynamically sensor device drivers for sensor device Plug&Play. We implement a prototype and evaluate it to make sure that there is no performance degradation like sensor device driver connection speed and memory usage. Connection speed overhead increases to 0.2ms. Memory usage overhead increases to hundreds byte. It shows that there is no heavy influence in running the actual program.