• 한국항공우주학회지
• /
• 제43권3호
• /
• pp.232-242
• /
• 2015

기동 성능과 스텔스 성능을 극대화시키기 위해 무미익 람다(lambda) 형상의 무인전투기에 대한 연구개발이 각 국에서 활발히 진행되고 있다. 이러한 형상의 비행체는 불안정한 동적 비행특성을 가질 가능성이 높으며, 이를 비행제어 시스템으로 제어하기 위해서는 보다 정확한 동안정 미계수 예측이 필수적이다. 본 연구에서는 풍동기법의 단점을 보완하고 순수 공기역학적 동안정 미계수를 예측하기 위해 전산유체역학의 Dynamic Mesh 기법을 적용하여 강제진동법을 모사하였고, 해석결과를 기존에 확보한 시험결과와 비교하여 검증하였다. 해석결과는 종축 동안정 미계수에 국한하였으며, 무미익 람다 형상의 기준 받음 각, 진동주파수, 진동폭 등의 변화에 따른 동안정 미계수 변화 경향성을 파악하였다. 전산해석 결과는 풍동시험 데이터와 유사한 경향성을 보였으며, 제시된 연구기법을 통해 항공기 동안정 미계수를 효율적으로 구할 수 있음을 확인하였다.

• 한국군사과학기술학회지
• /
• 제17권6호
• /
• pp.733-743
• /
• 2014

Since the technology of anti-ship missiles has advanced rapidly, defending battleships from the threat of anti-ship missiles is a crucial factor for the survival of warships. In this paper, we analyze the performance of an anti-ship missile defense system whose name is Close-In-Weapon-System. We show the survival probability of a warship equipped with the Close-In-Weapon-System as the number of anti-ship missiles attacking the warship varies. Because of the complex and dynamic operational characteristics surrounding the Close-In-Weapon-System such as speed of missiles, different range of an individual weapon in the weapon system, and the continuous change of the kill probability of the missiles corresponding to the distance of missiles from ships, few work has been done for the performance of Close-In-Weapon-System. We present a model to incorporate all the dynamic characteristics of the system using absorbing Markov Chain. With our results, we expect commanders of warships equipped with Close-In-Weapon-System to be provided with more helpful information on how to deal with the anti-ship missiles.

• International Journal of Precision Engineering and Manufacturing
• /
• 제6권1호
• /
• pp.36-41
• /
• 2005

• 정보보호학회논문지
• /
• 제14권3호
• /
• pp.101-106
• /
• 2004

최근 사이버 테러에 대한 관심이 고조되면서 네트워크 보안 시뮬레이터가 필요하게 되었다. 네트워크 보안 시뮬레이터는 침입 행위 및 방어 행위를 모델링하여 침입에 대한 피해 정도, 방어 대책의 효과성 등을 파악하기 위한 도구이다. 이 도구를 통해서 사이버 테러에 대한 예방과 복구가 가능하기 때문이다. 이를 위해 기존의 시뮬레이터들은 시뮬레이션 수행 전에 모든 시나리오를 작성해 놓고 시뮬레이션을 수행하였다. 그러나 사람의 판단 및 행위를 모델링하지 못한 시뮬레이션은 정확한 결과를 나타내지 못하였다 따라서 본 논문에서는 기존 네트워크 보안 시뮬레이터에 동적 시뮬레이션 요소를 첨가함으로써 정확히 네트워크 침입 및 방어 행위를 표현하고자 하였다. 또한 이를 위한 시뮬레이터 구조 변경 방법을 제안하였다. 시뮬레이터를 구현한 후에는 슬래머 웜의 시뮬레이션을 수행하여 기능이 올바로 구현되었음을 확인하였다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제10권4호
• /
• pp.508-519
• /
• 2018

In order to design the hull form of an underwater vehicle in the conceptual design phase, the dynamic characteristics depending on the hull form parameters should be identified. Course-keeping stability, turning ability, yaw-checking ability, and mission competence are set to be the indices of the dynamic characteristics, and the geometric parameters for the bare hull and rudder are set to be the hull form design parameters. The total sensitivity of the dynamic characteristics with respect to the hull form parameters is calculated by the chain rule of the partial sensitivity of the dynamic characteristics with respect to the hydrodynamic coefficients, and the partial sensitivity of the hydrodynamic coefficients with respect to the hull form parameters. Based on the sensitivity analysis, important hull form parameters are selected, and those optimal values to satisfy the required intercept time of mission competence of a specific underwater vehicle and turning rate are estimated.

• 대한기계학회논문집A
• /
• 제20권12호
• /
• pp.3767-3781
• /
• 1996

Generally, dynamic loads are applied to real structures. Since the analysis with the dynamic load is extremely difficult, static loads are utilized by proper conversions of the dynamic loads. The dynamic loads are usually converted ot static loads by safety foactors of experiences. However, it may increase weight and decrease reliability. In this study, a method is proposed for the conversion process. An equivalent static load is calculated ot generate a same maximum displacement. The method is verified through numerical tests on a spring-mass systems of one and multi degrees-of freedom. It has been found that the duration time of the loads and the natural frequencies of the structures are critical in the conversion process. A road arem is a self-propelled howizer is selected for the application of the proposed method. The shape of the road arm is optimized under the converted static loads.

• Structural Engineering and Mechanics
• /
• 제84권5호
• /
• pp.675-684
• /
• 2022

The conventional single-degree-of-freedom (SDOF) system is appropriate for dynamic response analysis of paneltype structures without an opening. However, the typical building structures usually have four-sided fixed walls having an opening. Therefore, it may induce a considerable error when dynamic responses are estimated based on the conventional SDOF system, since the SDOF system cannot consider the effect of an opening during the SDOF analysis. For this reason, this study proposes a new SDOF system to consider the effect of an opening by adjusting its load-mass factor. The load-mass factor can be modified based on the assumption that the behaviors of the four-sided fixed wall with an opening is very similar to the behaviors of the same size wall without an opening, when the uniformly distributed blast loaded area is identical. In order to confirm a feasibility of the proposed SDOF system, a series of numerical simulations were carried out for the four-sided fixed reinforced concrete (RC) wall under a blast load. The dynamic responses estimated from the proposed SDOF system and the conventional SDOF system were compared with the dynamic responses evaluated from the finite element (FE) analysis. Especially, for the maximum dynamic responses except for 50% opening case, the proposed SDOF system had about 1.1% to 25.7% normalized errors while the conventional SDOF system had about 4.1% to 49.1% normalized errors.

• 열처리공학회지
• /
• 제8권4호
• /
• pp.266-278
• /
• 1995

The high strain-rate dynamic plastic behavior of Fe-X%Mn alloys was investigated. The strain rate did not have an effect when tested under quasi-static strain rates($2{\times}10^{-3}/sec$ and $2{\times}10^{-1}/sec$). However, the true stress increased at all strain levels when the strain rate increased to $6{\times}10^3/sec$. Based on the experimental results, an constitution equation to calculate the dynamic strength for strain rates over $10^4/sec$ was determined. The Fe-5%Mn alloy containing athermal ${\alpha}^{\prime}$ martensite initially did not show work hardening. The work hardening increased with Mn content showing a maximum at 20% Mn. The high work hardening of Fe-20%Mn and Fe-30%Mn alloys appears to be closely related not only to the initial amounts of ${\varepsilon}$ martensite but to the strain induced transformation (${\gamma}{\rightarrow}{\varepsilon}$ and ${\varepsilon}{\rightarrow}{\alpha}^{\prime}$) occurring during each stages of deformation.

• 한국군사과학기술학회지
• /
• 제22권2호
• /
• pp.207-214
• /
• 2019

This paper proposes a new feature extraction method for automatically estimating the number of target and detecting the chaff using high range resolution profile(HRRP). Feature of one-dimensional range profile is expected to be limited or missing due to lack of information according to the time. The proposed method considers the dynamic movements of targets depending on the radial velocity. The observed HRRP sequence is used to construct a time-range distribution matrix, then assuming diverse radial velocities reflect the number of target and seduction chaff launch, the proposed method utilizes the characteristic of the gradient distribution on the time-range distribution matrix image, which is validated by electromagnetic computation data and dynamic simulation.

• 한국항공우주학회지
• /
• 제47권5호
• /
• pp.379-387
• /
• 2019

다중 임무점 방문을 위한 경로 계획의 복잡도는 단일 구간 경로 계획을 위한 복잡도보다 크게 더 높다. n개의 다중 임무점을 방문하는 경로 계획을 위해서는 $n^2+n$번의 단일 구간 경로 계획이 필요하다. 본 논문에서는 동적 변화 환경에서 다중 임무점을 방문하기 위한 최적의 경로 계획 알고리즘인 Multiple Mission $D^*$ Lite($MMD^*L$) 알고리즘을 제안하였다. $MMD^*L$은 앞서 수행된 단일 구간 경로 계획 정보를 재사용함으로써 복잡도를 감소시킨다. 시뮬레이션 결과를 통해 경로의 최적성은 양보하지 않으면서도 복잡도가 급격하게 감소하였음을 확인하였다.