• 한국염색가공학회지
• /
• 제32권1호
• /
• pp.9-18
• /
• 2020

In this study, we conducted alkali hydrolysis on sea-island type PET ultramicrofiber tricot fabric and dyeing according to the various conditions with black disperse dye. Herein, we evaluated the weight loss rate and tensile strength according to the NaOH contents. The optimal alkali hydrolysis treatment conditions were set to 25 %omf NaOH with a treatment time of 60 min at 110 ℃, and average weight loss rate of the PET ultramicrofiber tricot fabric is about 23 %. The dyeing conditions were investigated with different dyeing temperatures(95-135 ℃), dyeing time(20-60 min), dye contents(2-10 %omf), dispersant contents(1-9 g/ℓ), pH buffer solution contents(1-9 g/ℓ), UV-absorbent contents(5-25 %omf) and reduction cleaning process conditions for black color. We obtained the optimum conditions of the dyeing with the dye contents of 8 %omf, the dispersant contents of 1 g/ℓ, the pH buffer solution contents of 1 g/ℓ, the UV-absorbent contents of 10 %omf, the dyeing temperature of 135 ℃ and the dyeing time of 40 min. The light colorfastness of dyed ultramicrofiber PET tricot fabric was good to excellent in the range of 4 to 5.

• 한국염색가공학회지
• /
• 제31권3호
• /
• pp.195-213
• /
• 2019

The purpose of this study was to identify novel extracts of brawn algae with the high deodorant capacity and antioxidant activity. To achieves this, an composition, deodorant performance and free radical scavenging activity were analyzed in powder and water extracts of Ecklonia cava(PEC/EEC), Saccharina japonica(PSJ/ESJ), Eisenia bicyclis(PEB/EEB), Sargassum spp.(PSS/ESS) and Hizikia fusiformis(PHF/EHF) using several analytical methods. Major component of five powders was verified as PEC, phlorotannin; PSJ, alginic acid and glutamic acid; PEB, carotenoid, chlorophyll, phlorotannin, tocopherol and fucoxantin; PSS, ${\beta}$-carotene and polyphenol; PHF, tannin. The highest level of DPPH scavenging activity was detected in EEC($IC_{50}=23.018{\mu}g/ml$), followed by EEB, ESJ, EHF and ESS. The deodorizing performance to ammonia was maintained high level in PEC, PSJ, PEB and PSS, while PHF showed low level in the same condition. But, the deodorizing performance to acetic acid was slightly higher in PSJ and PEC than those of PEB, PSS and PHF. Based on the results of DPPH scavenging activity and deodorizing capacity, we selected fractions of S. japonica as leading extracts and further prepared the 70% acetone extract (AESJ) and 70% ethanol extract (EESJ) from PSJ. The contents of total flavonoid, total phenol and total condensed tannin was significantly increased with 112-209% in AESJ and EESJ compared to those of ESJ. Also, a similar enhancement was observed on the level of DPPH scavenging activity and deodorizing performance against ammonia/acetic acid in AESJ and EESJ. Therefore, these results suggest that AESJ and EESJ contained with high total phenol and total condensed tannin contents may exhibit high deodorant capacity and antioxidant activity as well as has the potential for use as a powerful biomaterial for antibacterial deodorant.

• 한국염색가공학회지
• /
• 제34권2호
• /
• pp.93-101
• /
• 2022

In this study, the dyeing properties of supercritical fluid dyed cotton fabrics were investigated which use two types of dyes, such as C.I. Disperse orange and C.I. Disperse red 167. Dyeing temperature, pressure and leveling time were equally applied at 130 ℃, 250 bar, and 60 minutes with reference to the related literature, and experiments were performed at concentrations of 0.04, 0.1, 0.4 and 0.8 % o.w.f with different concentrations. Dyeability was confirmed through measurement of washing fastness and color coordinate, and a calibration curve of each dye was drawn up and the absorbance of the residual dye was measured to confirm the amount of residual dye and the dye exhaustion rate at the corresponding concentration. As a result of color difference measurement, as the concentration increased, the L^* value decreased and the K/S value increased. However, as the concentration increased, the increase in K/S value decreased compared to the input amount, and this tendency was more obvious in C.I. Disperse red 167 than in C.I. Disperse orange 155. The dye exhaustion rate which was calculated by using the amount of residual dye in the pot was also C.I. Disperse orange 155 was 96.16 % and C.I. Disperse red 167 was 94.57 %. However, as the dyeing concentration increased, the dye exhaustion rate decreased, that C.I. Disperse orange was 95.33 % and C.I. Disperse red 167 was 90.63 %. As a result of the washing fastness test for both dyes, dyed samples of which concentrations were 0.4 and 0.8 % o.w.f decreased by 0.5 ~ 1.0 grade. This is predicted because the dye did not completely adhere to the amorphous region of the cotton fiber and the dye simply adsorbed. The fastness to rubbing also maintained at least grade 3-4 up to the 0.1 % o.w.f concentration, but at the concentration of 0.4 % o.w.f or higher, it fell to grade 1 or lower, showing a very poor friction fastness.

• 한국염색가공학회지
• /
• 제35권4호
• /
• pp.196-205
• /
• 2023

Water-dispersed pigment is on-going study for without air pollution in the textile and print industry. Primer treatment is essential for the substrate to improve the printing quality of eco-friendly water-dispersed pigment ink. Otherwise in the case of untreated primer, the water-dispersed pigment ink will dry onto the surface and cause defective images. This study was conducted on film substrate coating (primer) to fix eco-friendly water-dispersed pigment ink on film substrate. The drying, bleeding, and color strength of the pigment ink were examined depending on the composition and mixing ratio of the coating solution. The mixing ratio of silica gel in the coating film is increased to 0, 0.5, 1, 2 and 3 and results that DK-1-3 of silica gel ratio of 1 showed the lowest bleeding such as 52%, the letter thickness of 0.76mm and DK-1-5 of SG ratio of 3 showed the highest bleeding such as 304%, the letter thickness of 2.02mm. The mixing ratio of SPA in the coating film is increased to 2.5, 5, 7.5, SPA ratio of 7.5 has a bleeding ratio of 9% and letter thickness of 0.544mm. It showed the closest value to 0.5mm. According to the result, the optimal mixing ratio of binder, polymer coagulant, silica gel is 100:7.5:1.

• 헤리티지:역사와 과학
• /
• 제54권1호
• /
• pp.52-69
• /
• 2021

고려시대의 사경은 어느 시기보다도 정교하고 화려한 기록물로 우리나라 서지학상 매우 중요한 위치를 차지하고 있다. 그 가운데에서도 감지(紺紙) 바탕에 제작된 사경은 장식성과 귀족들이 선호하였을 법한 품위와 격을 여지없이 보여주는 예라고 할 수 있다. 특히 이 시기에 제작된 많은 양의 사경들은 감지에 권자본(卷子本)과 절첩본(折貼本)의 장황 형태가 대표적인 것이다. 권자본은 유연성이 보장되지 않으면 그 자체가 갖는 구조적 한계 때문에 취급에 있어 불편함과 손상을 야기한다. 이를 보완하기 위해 절첩 형태로 바꿔 제작함으로써 편의성과 구조적인 안정성을 꾀하여 단점을 극복할 수 있게 되었다. 절첩 형태는 병풍의 형태와 유사하여 접었다 펼 수 있는 구조로 한 면의 크기에 맞추어 규칙적으로 연결되어 만들어진 것이다. 아무리 작은 크기라 하더라도 얇은 한지로 제작하면 취급에 어려움이 따르고, 형태를 유지하기 힘든 구조라고 볼 수 있다. 이러한 이유로 통상 절첩형의 사경은 두꺼운 종이로 만들어 첩의 구조를 지탱할 수 있는 힘을 가지도록 하였으며, 표지는 내지보다 더 두껍게 제작되어 내지를 보호할 수 있도록 하였다. 즉, '절첩형'은 종이에 두께를 주어 강도를 유지해야 하는 특성에 맞게 제작되는 것이 일반적이다. 그렇기 때문에 많은 양의 한지를 진하게 염색 가공하는 것은 오롯이 장인의 몫이 될 수밖에 없었다. 비단에 비해 흡수량이 몇 배 이상이고, 수십 차례 염색을 하여야만 진한 감색을 얻을 수 있는 '감지 제작 기법'은 구체적으로 문헌에 남아 있지 않고, 기법도 명맥이 끊긴 지 오래이다. 최근 한지장인과 천연염색가, 수리복원가에 의해 제각기 시도는 되고 있으나 유물에서 보이는 질감과 깊은 색감은 도저히 흉내낼 수 없다. 본 연구에서는 고려 말 사경을 보존 처리하기 위해 실제 유물에 적합한 보강지를 제작하는 과정에서 염색장과 한지장, 그리고 수리복원가의 협업으로 고려시대 감지를 재현하는 일련의 과정을 소개하고, 감지의 재현·제작 방법을 유추해보고자 한다.