• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.469-472
• /
• 2000

When NAR1A species were applied for the dyeing wastewater treatment process, it achieved 20.5% COD removal, whereas NAR3A and NBY3A species could achieve 50.3% COD removal at the same experiment conditions. In the case of real dyeing wastewater experience, Color remaoval was poor and COD removal was increased compare to the case of synthetic wastewater.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.3 s.116
• /
• pp.66-71
• /
• 2006

The objective of this study was to find in what color Hanji(Korean hand-made paper) is dyed when it is dyed with a pigment extracted from clove tree using different kinds of mordant, and how the paper is discolored and variety of strength under the condition of accelerated aging test. The results of this experiment are as follows. The Hanji dyed with aluminum acetate mordant was colored yellowish brown at pH 4.82, discoloration after aging was as much as a slight difference of color was recognized, and the decrease of strength after aging test was small. Thus, the method using aluminum acetate mordant was usable in coloring Hanji. The second most useful Hanji dyeing moth of was using distilled water and ferrous sulfate mordant, which dyed Hanji light brown at pH 6.03. However, when pigment was extracted using distilled water and copper sulfate mordant was used, discoloration was satisfactory but strength decreased too much and pale brown was obtained. Thus, this method was not usable.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.3 s.116
• /
• pp.61-65
• /
• 2006

The objective of this study was to find in what color Korean handmade paper(Hanji) is dyed when it is dyed with a pigment extracted from mugworts using different kinds of mordant, and how the paper is discolored and variety of strength under the condition of accelerated aging test. The results of this experiment are as follows. Among mugwort mordants, only ferrous sulfate mordant produced unique khaki color with a slightly lower degree of discoloration, so it is considered to be applicable in dyeing Korean paper. Bright yellow and light green colors were obtained using mugwort but their chroma was too low for actual use. With regard to water used, colors obtained using underground water had high chroma, but when distilled water was used paper was colored in useless light green. Mordant was found to lower the strength of Korean handmade paper, and the lowering of strength was even more serious under the condition of forced deterioration.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.17 no.2
• /
• pp.45-61
• /
• 2015

In order to analysis on color difference of natural dyes, I have dyed Hanji, cotton, silk fabric and exposed them to carbon arc light. The results of experiment have been analysed by wavelength of maximum absorption, amounts of dye uptake, color difference, Hunter's value and Munsell's value. Gardenia Jasminoides is monogenetic dye, but it gained darker color by pre-mordanting method used Al mordant agent and greenish yellow color by Fe mordant agent. whereas Curcuma, an Amur cork, and bud of pagoda tree are shown as greenish yellow color, and A barberry root, Betel nut, and Rhubarb are shown as reddish yellow color. these gained khaki colored dyed fabric by Fe mordanting. In addition, Sappan wood showed great result in pre-mordanting. Especially, it gained dark red color by Al pre-mordanting. The pink color was shown by post-mordanting. and Logwood showed great dyeing result in Hanji and cotton better than silk. Specially pre-mordanting was effective. Hanji and cotton showed greenish blue color by Al pre-mordanting, and silk showed brown color.

• Journal of the Korean Society of Costume
• /
• v.58 no.9
• /
• pp.68-80
• /
• 2008

The purpose of this study is, as a prior stage to produce manufactured medical goods, to examine literature on the medicinal efficacy of natural dyes that can be used to produce medical goods, and to experiment the possibility of dyeing of some medicinal ingredients that have not been used as natural dyes until now. For this study, 44 types of medicinal ingredients such as Gyomaekchil(buckwheat), Nohoiyeob(aloe), Pogongyounng(dandelion), and Jibooja(broom cypress) were used. First, they were classified by a thermal sensation such as hot, warm, neutral, cool, and cold feeling, and by their characteristics of complex tastes such as sweet, sour, bitter, salty, pungent, astringent, and flat tastes. And then they were dyed with two types of mordant, resulting to a total of 132 types of dyed cloths. The 132 dyed cloths could be classified as five types of colors: 89 types(67.42%) of yellow series, 25 types(18.94%) of yellow-red series, 6 types(4.55%) of green-yellow series, 6 types(4.55%) of purple series, and 6 types(4.55%) of purple-blue series. The results of this study found that there were various medicinal ingredients that had efficacy to cure skin disorders and also could be used as natural dyes.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.7
• /
• pp.971-979
• /
• 1999

The experiment was conducted on five different kinds of fabrics dyed with loess. The sewability of fabrics dyed with loess by measuring the maximum needle piercing forces(MPF) through fabrics has been studied, MPF measurement using tensile tester was done 60 times for each fabrics at fixed low speed of 300mm/min. The nature of the loess on the dyed fabrics was physically jammed betweenthe fibers or adhered to the surface of fibers in the form of the fine particles so that the MPF through fabrics increases extremely in proportion to the increase of loess uptake and the plying number of fabrics dyed with loess. This results indicate that the MPF through fabrics is affected by mean value of the coefficient of friction on the surface of fabric(MIU) and cloth cover factor(Kc) in this experiment. Fabric was finished with softner to decrease the MPF during sewing operation, The MPF through softner finished fabric was decreased remarkably.

• Journal of Korean Society of Water and Wastewater
• /
• v.18 no.3
• /
• pp.392-400
• /
• 2004

This research uses the $TiO_2$/UV process to verify the most suitable condition and possibility to dispose dyeing wastewater that contains pigment and a large amount of pollutants. For this, this research has enforced experiments that compare photo adsorption, photolysis, and photo catalyst oxidation reaction, and also evaluated and analyzed the change of pH and $TiO_2$ dosage, irradiation rates of ultraviolet rays and the dosage change and injection method of $H_2O_2$. According to the results of the dyeing wastewater experiment of storehouse catalyst that uses the new form of $TiO_2$, the photo catalyst oxidation reaction proved to be more effective than photo adsorption and photolysis; 35%, 21% in the case of $TCOD_{cr}$ and 39%, 28% in the case of chromaticity. Taking into consideration the reaction time, amount of photo catalyst reaction and irradiation amount of ultraviolet rays, the decomposition efficiency of pH change proved to be most effective at pH 4. On the whole, the acidity area proved to be effective in dyeing water exclusion than neutral and alkalinity areas. Having evaluated the influence of $TiO_2$ dosage, not only does the decomposition efficiency continuously improve as the $TiO_2$ dosage increases but the shielding effect does not occur also when the $TiO_2$ is at a fixed state. The influence of ultraviolet irradiation amount concluded in the result that as the ultraviolet irradiation amount increases the decomposition efficiency continually increased, but in the case of chromaticity when the irradiation amount was higher than 37.8mW/cm2 the removal efficiency is slowed remarkably. The influence of $H_2O_2$ dosage evaluation reached the results that although the decomposition efficiency increases with the increase of $H_2O_2$ dosage, when above 150mg (total dosage: 1200mg) $H_2O_2$ consumes OH radical itself and reduces the decomposition efficiency. Also in the case of the $H_2O_2$ injection method rather than injecting in the whole amount of $H_2O_2$ (1200mg) needed at the beginning all at once, injecting divided quantities of $H_2O_2$ whenever the electric current density falls below 10mgfl reduces the wases of OH radical due to an excess of $H_2O_2$ and in tum heightens the decomposition efficiency.

• Journal of Environmental Science International
• /
• v.33 no.6
• /
• pp.435-442
• /
• 2024

We investigated the accuracy of surface air temperature prediction according to the selection of land-use data and initial meteorological data using the Weather Research and Forecasting model-v4.2.1. A numerical experiment was conducted at the Daegu Dyeing Industrial Complex. We initially used meteorological input data from GFS (Global forecast system)and GDAPS (Global data assimilation and prediction system). High-resolution input data were generated and used as input data for the weather model using the land cover data of the Ministry of Environment and the digital elevation model of the Ministry of Land, Infrastructure, and Transport. The experiment was conducted by classifying the terrestrial and topographic data (land cover data) and meteorological data applied to the model. For simulations using high-resolution terrestrial data(10 m), global data assimilation, and prediction system data(CASE 3), the calculated surface temperature was much closer to the automatic weather station observations than for simulations using low-resolution terrestrial data(900 m) and GFS(CASE 1).

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.1
• /
• pp.30-41
• /
• 1999

This study was conducted to verify the advantages of Gal-Ot. Gal-Ot is defined the clothings dyed with persimmon juice. Firstly the physical properties of fabrics were examined. Secondly the wear tests were conducted. The wear tests were performed in climatic chamber controlled 3$0^{\circ}C$ air temperature 50$\pm$5% R.H and 0.2m/s air movement. Four women subjects participated in this experiment and 4 times experiments were performed per one subject. The expeimental schedule was planned following 4 steps that is sedentary posture during 30 minutes-walking the 5。slope treadmill by 70m/min during 20 minutes-sedentary posture during 20 minutes-standing posture on toward the blowing wind during 10 minutes. The results obtained is as folows : The insulation of fabric was increased with dyeing with persimmon juice. The air permeability of fabric was remarkably increased with dyeing with persimmon juice. The mean skin temperatures of subjects were apt to be higher in wearing Gal-Ot than undyed clothing. The clothing micro temperature of subjects were slightly inclined to become lower in wearing Gal-Ot than undyed clothing, The clothing micro humidity was decreasee when: the subjects were gal-Ot than wore undyed clothing, And then it brought about more comfortable on wear sensation. The differences of physiological reactions were not consistent between clothing types except for sweat rate on the back. This result may be attributed the to complex experimental schdules consisted of four steps and to a little difference between open type and close type. However I consider that the clothing type of Gal-Ot is suitable for open type because Gal-Ot is summer wear for blocking the sultry heat.

• The Research Journal of the Costume Culture
• /
• v.13 no.4 s.57
• /
• pp.540-549
• /
• 2005

It was the purpose of this study to investigate the effect of chitosan treatment and mordanting on the air-permeability, fastness of the dyestuff to washing, fastness of the dyestuff to light, and antimicrobial effect of cotton and nylon fabrics dyed using Rhusjara ica. In the dyeing experiment, examinations were made on the difference between the chitosan treated fabrics and chitosan untreated fabrics, and on the difference according to the type of mordanting agents and the mordanting methods. Dyeing was carried out for the chitosan treated and untreated fabrics under the conditions of non-mordanting and Al, Sn, Fe mordanting. As a result, due to the dye-uptake of the dyestuff component of the Rhusjara ica, the air-permeability values decreased considerably. And due to the action of the mordanting agents, the air-permeability decreased also. The air-permeability decreased more conspicuously in the case of the dyestuffs uptake to the chitosan components than in the case of the dyestuffs uptake to the cotton fibers or nylon fibers. Nylon dyed fabric exhibited better wash fastness than the cotton dyed fabric. As the number of washing increased, the color of the cotton fabric specimens and nylon fabric specimens, dyed using Rhusjara ica, shifted toward yellowish. The light fastness values were in the range of grade 1${\~}$2, which were very inferior. The light fastness values did not improve according to the mordanting or to the chitosan treatment. In the case of chitosan untreated fabrics dyed using Rhusjara ica, the growth rate of the bacteria promoted, on the contrary, compared to that of the control white fabric.