• Textile Coloration and Finishing
• /
• v.6 no.2
• /
• pp.40-46
• /
• 1994

In order to study the properties of cochineal color, variation of uv, visible spectra by pH, dyeing properties on the silk in several dyeing conditions and thermodynamic parameter were investigated. Cochineal colors had an unusual to pH, especially had instability in alkali condition. An increase in the dyeing temperature and in time resulted in an increase in the dye content of silk fibers. Concentration of cochineal color in the silk fiber was related to pH and the maximum exhaustion of cochineal colors showed at about pH 3. The value of apparent diffusion coefficients and standard affinities of dyeing increased with the increase of dyeing temperature. The standard heats of dyeing(ΔH°), variation of entropy(ΔS°) and activation energy(E/sub act/) were caculated to be -1.72kcal/mo1, -3.77cal/mo1ㆍdeg and 1.26kcal/mo1, respectively. Silk fabrics were dyed bright red by tin chloride, reddish purple by copper sulfate, and bluish gray by iron sulfate, respectively. Lightfastness of silk fabrics mordanted by metal ion was weak.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.11
• /
• pp.1774-1780
• /
• 2009

The dyeing properties of cotton fabric with Inonotus obliquus are studied by investigating the effect of dyeing conditions on dye uptakes such as, the concentration of Inonotus obliquus, dyeing temperature, time, and pH values. In addition, the effects of mordants on dye uptakes and antibacterial activities are also investigated. The results are summarized as follows: The dye uptakes of dyed fabrics were increased gradually with an increasing concentration of Inonotus obliquus. K/S values were the highest when the dyeing temperature and time were at $60^{\circ}C$ and 60 minutes, respectively. As for the changes of pH values of dyeing solution, K/S values recorded the highest at pH3-pH5. Antibacterial activities of Inonotus obliquus dyeing solution showed a significant effect in dyed cotton fabric with mordanting.

• Fibers and Polymers
• /
• v.4 no.4
• /
• pp.204-209
• /
• 2003

The effect of padding solution on the microwave heat dyeing of polyester fabric was studied extensively. Polyester fabrics were impregnated in aqueous urea solution and aqueous sodium chloride solution for 10 min and then dyed for 7 min by microwave apparatus (2450 MHz, 700 W) under optimum conditions which provide good exhaustion. Aqueous solutions of urea and sodium chloride showed more effective than water as a padding solution for microwave heat dyeing. The type of solvent added in padding media and its concentration significantly affects the K/S values of dyed polyester fabric. Added solvents such as n-hexane, acetone, and dimethyl formamide were also more effective than 100 % water as padding media for the microwave heat dyeing. It is supposed that the effect of used solvents on dyeing property of polyester fabrics depends on the solubility parameter difference between solvent and polyester fabric.

• Textile Coloration and Finishing
• /
• v.14 no.2
• /
• pp.102-102
• /
• 2002

The purpose of this study is to investigate dyeing properties of wool fabric with walnut colorants. Walnut colorants were extracted with water from walnut hull and characterized by FT-IR analysis. Effects of dyeing conditions and mordanting on dyeing properties and colorfastness were studied. Results obtained were as follows, 1. Higher K/S value was obtained at higher temperature and longer dyeing time, the highest K/S value was shown at 100℃, 60min. 2. Dye uptake was increased with the increase in colorants concentration up to 2%. Higher K/S value was obtained at acidic condition. 3. Mordanting was not effective for improving dye uptake and colorfastness and for changing color of the dyed fabric.

• Textile Coloration and Finishing
• /
• v.14 no.2
• /
• pp.26-32
• /
• 2002

The purpose of this study is to investigate dyeing properties of wool fabric with walnut colorants. Walnut colorants were extracted with water from walnut hull and characterized by FT-IR analysis. Effects of dyeing conditions and mordanting on dyeing properties and colorfastness were studied. Results obtained were as follows, 1. Higher K/S value was obtained at higher temperature and longer dyeing time, the highest K/S value was shown at $100^\circ{C}$, 60min. 2. Dye uptake was increased with the increase in colorants concentration up to 2%. Higher K/S value was obtained at acidic condition. 3. Mordanting was not effective for improving dye uptake and colorfastness and for changing color of the dyed fabric.

• Textile Coloration and Finishing
• /
• v.9 no.5
• /
• pp.10-18
• /
• 1997

In order to study the properties of safflower yellow colors, thermodynamic parameters and dyeing properties on the silk in several dyeing conditions were investigated. The uv-visible spectra of safflower yellow colors in several solvents show hypsochromic shift with the polarity of solvent but bathochromic shift with increasing acidity of solution. The apparent diffusion coefficients and standard affinities of dyeing increased with the increase of dyeing temperature. The standard heat of dyeing(${\Delta}H^0$), entropy change(${\Delta}S^0$) and activation energy($E_{act}$) were calculated to be - 1.144kcal/mol, -7.498(5$0^{\circ}C$)~-3.804(9$0^{\circ}C$)cal/molㆍdeg and 0.123kcal/mol, respectively. The concentration of safflower yellow colors in the silk fiber increased with dyeing temperature, time, concentration of colors and acidity of initial dyebath. Silk fabrics were dyed bright yellow by pre-mordanting with tin chloride. Lightfastness of silk fabrics pre-mordanted by tin chloride was not excellent.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2001.11a
• /
• pp.3-11
• /
• 2001

Fundamental studies at the CSIRO division of Wool technology and ICI on the diffusion of dyes into wool〔1,2〕have let to development of a new approach to wool dyeing. In this method, the cell membrane complex of wool is modified before dyeing by treatment under mildly alkaline conditions with a special chemicals. Wool pretreated with ethoxylated quaternary ammonium salt has an increased rate of dyebath exhaustion and dye penetration early in the dyeing cycle. This enables the treated material to be dyed below the boil for a similar time to the conventional cycle. This technique can be used on untreated and shrinkresist-treated wool and wool/nylon blends. In addition to good macro-levelness and excellent coverage of tippiness, the low temperature dyeing process give higher exhaustion levels of dyestuffs and insect-resist agent and hence cleaner effluent liquors, compared with conventional dyeing process. Low Temperature Dyeing process cause significantly less fiber damage than conventional way. The reduction in damage is reflected in improved processing performance of the dyed wool.

• Textile Coloration and Finishing
• /
• v.11 no.4
• /
• pp.39-49
• /
• 1999

In order to study the properties of cochineal colors, uv-visible spectra of cochineal colors solution, dyeing properties on the wool in several dyeing conditions and thermodynamic parameters were investigated. UV-visible spectra of cochineal colors solution showed hypochromic effect with the lapse of irradiation time but bathochromic shift with decreasing acidity of solution and addition of metallic ions. The concentration of cochineal colors in wool fiber increased with the increase of dyeing temperature, time, and acidity of initial dyebath. The value of apparent diffusion coefficients and standard affinities of dyeing decreased with the increase of dyeing temperature. The standard heats of dyeing$(\Delta{H}^\circ)$ and variation of entropy$(\Delta{S}^\circ)$ increased with the increase of concentration of initial dyebath. The activation energy$(E_a)$ were calculated to be 1.399~2.595kcal/mol in condition of 6~1%(o.w.f) dyebath. Wool fabrics were dyed reddish blue by iron sulfate, copper sulfate, aluminum acetate and tannic acid, and red by tin chloride, respectively. Lightfastness of wool fabrics dyed by cochineal colors were increased by mordant treatment, especially copper sulfate and iron sulfate treatment.

• Textile Coloration and Finishing
• /
• v.12 no.5
• /
• pp.280-287
• /
• 2000

For thousands of years, dyes were obtained from natural sources, such as plants and animals. Although synthetic dyes have replaced many natural dyes for commercial use but natural dyes with their fascinating color are still used extensively by some people. To investigate the dyeing properties of chestnut bur, which is most widely found in our country, some experiments were performed under the several dyeing conditions with silk and cotton fabrics. It was found that $\lambda_{max}$ of chestnut but extract was 410nm and the color of the fabric dyed is Yellow Red. The K/S value of silk and cotton fabrics increased when the dyeing temperature was higher than $60^\circ{C}$ and the dyeing time was more than 30 minutes. Optimal dyeing pH was between 5 and 6, and repetition of dyeing increased K/S value of the sample fabrics. K/S value of silk fabric dyed with chestnut bur extract was higher than that of cotton. Post-mordanting method showed higher color yield compared with pre-mordanting, and higher temperature and increased time in mordanting increased the dye-uptake.

• Ocean Science Journal
• /
• v.41 no.4
• /
• pp.221-226
• /
• 2006

More attention has been paid to the research on decolorization of dyeing wastewater nowadays. In this study, an investigation into the decolorization of dyeing wastewater was conducted using a combination of coagulant, carboxymethyl chitosan (NOCC) and coagulant aid, polyscrylamide (PAM). The factors influencing the decolorization efficiency, such as pH value, coagulant and the dosages of coagulant, were discussed. The results showed that using PAM as coagulant aid could reach a high decolorization efficiency compared with using NOCC alone. The optimal conditions were pH 2.3, 480 mg/L for NOCC, and 4-8 mg/L for PAM. Under the optimum conditions, the rate of decolorization could achieve 99%, and the removal of chemical oxygen demand (COD) could achieve 90%. In addition, the membrane processes with chitosan/rare-earth-metals could enhance the decolorization rate of Direct Black FF to 94.7%, and Indanthren Red F3B to 98.2%, respectively.