• 한국염색가공학회지
• /
• 제15권1호
• /
• pp.30-38
• /
• 2003

Research to dyeing properties of Ulmi cortex extract, silk and cotton fabrics were dyed and mordanted. Dyes were extracted from distilled water according to different pH values. The dyeability of Ulmi cortex extract were evaluated by conditions of dyeing temperature, dyeing time, dyeing pH, mordanting temperature, mordanting time, mordanting concentration and color fastness, etc. IR spectrum possessed absorption band of -OH at $3400cm^{-1},\;C-H\;at\; 2940cm^{ -1},\;aromatic\;C=C\;at\;1628cm^{-1},\;1518cm^{-1},\;C-O\;at\; 1107cm^{ -1},\;1043cm^{-1}$. And the $\labmda$max of extract appeared at 220nm and 280nm, so the substance of Ulmi cortex extract were catechin and tannin. Surface color of dyed fabrics were reddish yellow~yellow~greenish yellow. From the color fastness test, the fabrics dyed with PH 7 extract were excellent in irradiation and washing. Mordanting improved the color fastness and K/S value of dyed fabrics.

• 한국의류산업학회지
• /
• 제11권2호
• /
• pp.344-349
• /
• 2009

Optimum dyeing conditions of green tea extracts were investigated toward nylon, cotton, rayon, and tencel fabrics. Affinity of green tea extracts was exhibited much higher onto nylon fabric than the other cellulosics. As for nylon, the adsorption was increased with the increase of dyeing temperature and optimum dyeing pH was around 4~6. Buildup property of green tea extract was good showing a linear relationship between concentration of the extracts and color strength of dyed fabrics within experimental range. Color fastnesses were good to excellent in general except to light.

• 한국의류학회지
• /
• 제22권5호
• /
• pp.557-564
• /
• 1998

Dyeing properties of silk fabric with black tea colorants were investigated in terms of dye uptakes at various dyeing conditions and the effect of mordants on color change and colorfastness. Black tea colorants showed high affinity to silk and produced brown color. Two types of adsorption isotherm were obtained; Langmuir and Freundlich equilibrium at 360 nm and 460 nm, respectively. Thus, it is considered that both of ionic and hydrogen bondings are involved in silk dyeing with black tea colorants. Dye uptake increased continuously as concentration of colorants increased. Brown color was not changed with mordant type except that Fe mordant produced dark brown color. Mordanting did not influence colorfastness of dyed silk significantly. Therefore, mordanting was not necessary in dyeing silk with black tea colorants.

• 한국염색가공학회지
• /
• 제18권6호
• /
• pp.63-68
• /
• 2006

In synthetic/spandex blends fibers, contents of the synthetic fiber by percentage is higher than those of spandex. Thus, the dyeing process of the blends fiber is mainly focused on the synthetic fiber, but not the spandex. In this study, we used several series of vat dyes for dyeing the nylon/spandex blend fabrics and their dyeing properties(fk value) were investigated at various reduction agents, temperatures, pH which have the potential for deep shade dyeing effects. The formamidinesulfinic acid were found to be effective to increase the fk values of the blend fiber compared to sodium hydrosulfite and Rongalit C. Higher temperature($100^{\circ}C$) and lower pH(pH 4) were observed as suitable conditions for maximum fk values.

• 한국염색가공학회지
• /
• 제11권3호
• /
• pp.49-57
• /
• 1999

The effect of padding solution for the microwave heat dyeing of polyester fabric was studied variously. The dyeing property of polyester fabric varied with the kinds of added chemicals in the padding solution. Polyester fabrics impregnated in aqueous urea solution and aqueous sodium chloride solution for 10 minutes and then dyed for 7 minutes by microwave apparatus(2450 MHz, 700 W) under optimum conditions give good exhaustion. An aqueous solution of urea and a sodium chloride solution was more effective than water as padding solution for microwave heating dyeing. The K/S values of dyed polyester fabric by microwave were significantly affected by the type of solvent added in padding media and its concentration. Added solvents, n-hexane, acetone and dimethyl formamide were also more effective than water as padding media for the microwave heating dyeing. It is assumed that the effect of used solvents on dyeing property of polyester fabrics depends on the solubility parameter difference between solvent and polyester fabric.

• 한국염색가공학회지
• /
• 제27권1호
• /
• pp.96-104
• /
• 2015

This study examined the pretreatment effect, appropriate dyeing conditions, color fastness and functionality of cotton fabrics dyed with Zizania latifolia Turcz. Dye uptake was substantially increased by pretreatment and chitosan pretreatment was much more effective than tannic acid pretreatment. Optimal dyeing conditions were colorant concentration of 100%, dyeing temperature of $100^{\circ}C$, dyeing time of 80 minutes and dyebath pH of 5.5. Color fastness of chitosan pretreatment and dyed cotton to washing, rubbing, perspiration and light was 4, 5, 3-4(acidic), 3(alkaline) and 3 respectively. Color fastness of tannic acid pretreatment and dyed cotton to washing, rubbing, perspiration and light was 4, 5, 3-4(acidic), 4-5(alkaline) and 4 respectively. Deodorization rates of ammonia(NH3) were 99.9% in both cases. UV protection rate were 98.3% of UV-A and 98.5% of UV-B in case of chitosan pretreatment. UV protection rate were 98.2% of UV-A and 98.5% of UV-B in case of tannic acid pretreatment. UV protection factor(UPF) was 50+ in both cases. Reduction rate of Staphyloccus aureus were 99.9% in both cases. Therefore Zizania latifolia Turcz. could be used a new functional colorant.

• 한국의류학회지
• /
• 제43권2호
• /
• pp.288-296
• /
• 2019

This study examined the proper dyeing conditions, color fastness and functionality for wool fabrics dyed with Chamaecyparis obtusa leaf extract. FT-IR and UV-Vis spectrum analysis showed that tannin and flavonoids were contained in the extracted colorant. The dyeing of wool fabrics using Chamaecyparis obtusa leaf was good without pretreatment or mordant treatment. Optimal dyeing conditions for wool fabrics were a colorant concentration of 70%(v/v), dyeing temperature of $100^{\circ}C$, dyeing time of 100 minutes and dyebath pH of 5.8. Color fastness of dyed wool fabrics to washing, rubbing, perspiration was good, whereas light was grade 3. The UV protection rate and deodorization rate of wool fabrics dyed with Chamaecyparis obtusa leaf improved. Reduction rate of Staphylococcus aureus/Klebsiella pneumoniae were excellent at 99.9%. Therefore, it was confirmed that Chamaecyparis obtusa leaf can be used as environ-mentally friendly natural dye.

• 한국염색가공학회지
• /
• 제16권4호
• /
• pp.1-9
• /
• 2004

In recent, development of nano fiber has been one of the most active subjects in the world. Nano fiber is defined as a ultra fine yarn with a diameter unit of $10-100\times10^{-9}meter$, which is possible to be produced by an electro-spinning technology. In this study, physical characteristics and dyeing properties of nylon 66 nano fiber were investigated. Nylon 66 nano fiber was dyed with levelling type acid dyes. X-ray diffraction method and DSC analysis were used for the measurement of the degree of crystallization. Analysis of amino end groups was also performed in order to examine a relationship between number of amino groups and its dyeing property as well as water absorption behavior. The maximum exhaustion % of dyes and dyeing rate under various dyeing conditions, such as dyeing temperature and pH in dye bath, along with build-up properties for 2 acid dyes were evaluated. It was found that the degree of crystallization of nano fiber was smaller than that of regular fiber, and amino end groups of nano fiber were less than regular fiber. Half dyeing time of nano fiber was shorter than regular fiber because of the bigger specific surface area. Effect of pH on exhaustion % was small in case of nano fiber. Exhaustion of nano fiber increased with higher concentration of dye.

• 한국환경과학회지
• /
• 제15권7호
• /
• pp.659-667
• /
• 2006

This research aims at applicability of adsorption process in order to satisfy the restricted Effluent Quality Standards for dyeing wastewater. The dyeing wastewater treated by biological process with carrier imbedded microorganisms was directly applied to the activated carbon adsorption in Process A, The dyeing wastewater treated by Fenton oxidation for the effluent of biological process was applied to the adsorption in Process B. It was found that the optimum conditions of adsorption with granular activated carbon are $20^{\circ}C$ and 120 minutes for the batch experiment. Langmuir equation was fitted better than Freundlich equation to the experimental data. The breakthrough time of adsorption column was determined by color rather than $COD_{Mn}$ for both Process A and Process B. The results revealed that the breakthrough time of adsorption for two processes was extended by the treatment of Fenton oxidation for dyeing wastewater treated by biological treatment than the direct application of dyeing wastewater treated by the biological treatment. Adsorption process can be applied in order to meet the restricted Effluent Quality Standards for dyeing wastewater.

• 한국의류산업학회지
• /
• 제17권3호
• /
• pp.476-485
• /
• 2015

The purpose of this research is to analyze the effects of persimmon juice and hibiscus flowers extract to perform combination dyeing of silk fabrics, with respect to color changes, fastness, and functionality. The optimal conditions as a result, were shown at 100% of dye concentration, $40^{\circ}C$ of dyeing temperature and 30 minutes of dyeing time while in terms of dye uptake depending on the kind of mordants and methods. The highest K/S value was recorded at pH 3, pre-mordants of $CuSO_4$, and $SnCl_2$, post-mordanting. After repeated dyeing and post-mordanting, various color change occurred with mordant treatments. Color fastness of dyed fabrics with hibiscus flowers extract was improve considerably by combination dyeing with persimmon juice extract. In aspects of functional properties, it showed excellent results of 99% deodorization rate, 99.9% Staphylococcus aureus rate and 99.9% Klebsiella pneumoniae.