• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.258.2-258.2
• /
• 2015

염료감응형 태양전지(Dye-Sensitized Solar Cells; DSSC)는 공정비용과 재료가 저렴하여 차세대 태양전지로 각광받고 있다. 특히 투명한 재료를 사용하므로 flexible한 기판을 이용하여 그 적용범위가 넓다. DSSC는 상부전극인 FTO와 전해질의 접촉으로 인해 일부 FTO의 전자가 외부로 나가지 못하고 산화환원 반응에 의해 도로 전해질로 들어갈 확률이 있다. 이로 인해 효율 감소문제를 야기 할 수 있다. 이를 해결하기 위해 FTO위에 여러 물질들을 증착하거나 코팅 등의 많은 연구가 이루어져 왔다. ZnO를 DSSC로 적용한 연구는 많이 이루어졌지만 대부분 공정이 Chemical Vapor Deposition (CVD)으로 진행 되어왔다. 본 연구에서는 FTO위에 ZnO를 진공 공정에 비해 저렴하고 간단한 spin-coating으로 blocking layer를 형성하였다. 그 후 염료에서 여기 된 전자를 FTO로 전달해 주는 역할을 하는 TiO2를 doctor blade방법으로 형성하였다. ZnO는 TiO2하고 전도대와 가전자대의 에너지 준위 차이가 거의 없고, ZnO의 전자 이동도가 TiO2보다 높기 때문에 FTO로 전자를 큰 저항 없이 전달 할 수 있다. 또한 투과율이 좋아 염료까지의 빛의 투과성도 뛰어나다. ZnO blocking layer를 형성하여 FTO에서 전해질로의 전자이동을 막아주는 역할을 하여 DSSC의 performance 향상을 확인하였다. Field Emission Scanning Electron Microscope(FE-SEM)을 통해 FTO/ZnO/TiO2의 계면 및 두께를 확인하였고. DSSC의 특성 분석을 위해 I-V curve, Power conversion efficiency, Impedance spectroscopy를 측정 하였다.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1430-1431
• /
• 2011

To develope the transparent conducting oxide(TCO) films is one of the essential technologies to improve various properties of electro-optical devices such as dye-sensitized solar cells(DSCs). ITiO thin film is considered one of the candidates as TCO electrodes of DSCs because it shows many advantages such as the high transparency in long wavelength range above 700nm and excellent properties of electrical necking between nanoporous TiO2 and ITiO transparent electrode. This paper presents the effect of sputtering processes on the structural, electrical and optical properties of ITiO thin film deposited by r.f. magnetron sputtering. The effect of doping concentration of Ti on the chemical compounds and C axis-orientation properties of were mainly studied experimentally. The morphology and electrical properties were greatly influenced by deposition processes, especially by the doping concentration of Ti. The $3.8{\times}10^{-4}{\Omega}{\cdot}cm$ of minimum volume resistivity were obtained under the experimental conditions of gas pressure 7mTorr, substrate temperature $300^{\circ}C$, and 2.5% of Ti doping concentration.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.6
• /
• pp.459-464
• /
• 2008

We present a novel microcantilever device with nano-interdigitated electrodes (nano-IDEs) and DNA selective immobilization on the nano-IDEs for biosensing applications. Using the nano-IDEs and cyclic voltammetric methods, we have achieved selective immobilization of DNA with submicrometer spatial resolution on a freestanding microcantilever. $70{\sim}500\;nm$-wide gold (Au) nano-IDEs are fabricated on a low-stress SiNx microcantilever with dimensions of $100{\sim}600\;{\mu}m$ in length, and $15{\sim}60\;{\mu}m$ in width, with a $0.5\;{\mu}m$ thickness using electron beam lithography and bulk micromachining. Streptavidin is selectively deposited on one side of the nano-IDEs using cyclic voltammetry at a scan rate of 0.1 V/s with a range of $-0.2{\sim}0.7\;V$ during $1{\sim}5$ cycles. The selective deposition of dsDNA is confirmed by fluorescence microscopy after labeling with YOYO-1 dye.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.175-175
• /
• 2011

최근 석유 자원의 고갈로 인하여 요구되는 대체 에너지 개발의 필요성이 대두되고 있다. 그중 태양에너지는 지구의 생명체가 살아가는 에너지의 근원으로서 매초 800~1,000 W에 달하는 에너지양으로 볼 때 태양은 인류가 가장 풍부하게 활용할 수 있는 에너지원이다. 태양에너지를 이용한 염료감응형 태양전지(Dye-Sensitized Solar Cells, DSSCs)는 제조원가를 낮출 수 있고, 유리 전극을 이용한 투명한 태양전지를 제조할 수 있어 건물의 유리창등으로 응용할 수 있는 장점이있다. 이러한 광변환 효율을 증가시키기 위한 방법으로 전기방사 TiO2 Nanofiber를 기계적으로 갈아서 제조한 TiO2 Nanorod 와 TiO2 Nanoparticle를 섞어서 만든 paste를 이용하여 넓은 표면적과 빠른 전자수송도를 갖게 하였고, 흡착된 염료에서 발생되는 광전자가 전해질의 산화, 환원되는 요오드 이온(I-/I3-)과의 재결합(recombination)현상을 TiO2 전극 위에 높은 밴드갭(band-gap)을 가지는 Al2O3 박막을 TriMethylAluminium (TMA) 전구체를 이용한 원자층 증착(Atomic Layer Deposition, ALD) 공정을 사용하여 진공증착 통해 광전변환효율이 떨어지는 현상을 방지하여 효율을 높였다.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.15
• /
• pp.6691-6696
• /
• 2015

Background: Endometrial carcinoma is the most common gynecological cancer and its treatment is still controversial, especially in its early stages. There are conflicting data about the efficacy of retroperitoneal lymphadenectomy during abdominal hysterectomy and bilateral salpingoophrectomy treatment. Lymphadenectomy carries a risk of severe complications, especially in women with co-morbidities. Selective lymphadenectomy has been widely employed for staging evaluation of endometrial carcinoma because it is simple and seems to provide reliable data regarding nodal metastasis. This study was designed to evaluate accuracy of sentinel node sampling in detecting lymph node metastasis in primary endometrial carcinoma during staging laparotomy. Materials and Methods: Ninety-three women with endometrial carcinoma at high-risk for nodal metastasis were studied. During laparotomy, methylene blue dye was injected into sub-serosal myometrium, then retroperitoneal spaces were opened and blue lymph nodes within pelvic and para-aortic regions were removed as separate specimens for histopathological examination (sentinel lymph nodes = SLNs). Hysterectomy and selective lymphadenectomy then performed for all women included in this study. Results: Deposition of methylene dye into at least one lymph node was observed in 73.1% (68/93) of studied cases. 18.3% (17/93) of studied women had positive lymph node metastasis and 94.1% (16/17) of them had positive metastasis in SLNs. In this study, SNLs had 94.4% sensitivity and 100% specificity in prediction of lymph node metastasis. Mean number of lymph nodes removed from each case decreased when SLNs biopsy were taken. Conclusions: SLNs are the key lymph nodes in endometrial tumor metastasis and their involvement could be an indicator for whether or not complete systematic lymphadenectomy is needed during staging laparotomy.

• Clean Technology
• /
• v.20 no.3
• /
• pp.306-313
• /
• 2014

Nanoporous $TiO_2$ films are commonly used as working electrodes in dye-sensitized solar cells (DSSCs). So far, there have been attempts to synthesize films with various $TiO_2$ nanostructures to increase the power-conversion efficiency. In this work, vertically aligned rutile $TiO_2$ nanorods were grown on fluorinated tin oxide (FTO) glass by hydrothermal synthesis, followed by deposition of an anatase $TiO_2$ film. This new method of anatase $TiO_2$ growth avoided the use of a seed layer that is usually required in hydrothermal synthesis of $TiO_2$ electrodes. The dense anatase $TiO_2$ layer was designed to behave as the electron-generating layer, while the less dense rutile nanorods acted as electron-transfer pathwaysto the FTO glass. In order to facilitate the electron transfer, the rutile phase nanorods were treated with a $TiCl_4$ solution so that the nanorods were coated with the anatase $TiO_2$ film after heat treatment. Compared to the electrode consisting of only rutile $TiO_2$, the power-conversion efficiency of the rutile-anatase hybrid $TiO_2$ electrode was found to be much higher. The total thickness of the rutile-anatase hybrid $TiO_2$ structures were around $4.5-5.0{\mu}m$, and the highest power efficiency of the cell assembled with the structured $TiO_2$ electrode was around 3.94%.

• Journal of the Korean Vacuum Society
• /
• v.17 no.1
• /
• pp.67-72
• /
• 2008

We have studied the effect of heat treatment of multi-walled carbon nanotubes (MWNTs) as a counter electrode on the electro-chemical properties of dye-snsitized solar cells. MWNTs on the p-type Si substrate were synthesized by thermal chemical vapor deposition (CVD) using Fe catalysts. We prepared the two types of MWNTs samples with the different diameters. The rapid thermal annealing (RTA) treatment for the MWNTs was carried out at the growth temperature ($900^{\circ}C$) for 1 minute with $N_2$ gas atmosphere. The structural, electrical and electrochemical properties of MWNTs were investigated by field-emission scanning electron microscopy (FE-SEM), Raman spectroscopy, 2-point probe station and electrochemical impedance spectroscopy (EIS). The I(D)/I(G) ratio of heat-treated MWNTs in Raman spectra was considerably decreased. It was also found that the heat-treated MWNTs showed better redox reaction of iodide at the interface between MWNTs surface and electrolyte than that of as-grown MWNTs. The redox resistance value of heat-treated electrodes was measured to be much lower than that of as-grown electrode at the interface. As a result, the counter electrode using the heat-treated MWNTs showed better electrochemical properties.

• Journal of the Korean Vacuum Society
• /
• v.22 no.1
• /
• pp.13-19
• /
• 2013

It is expected that progress in building-integrated photovoltaic (BIPV) systems, improving the functionality and design of buildings, will be accelerated in the coming years. While the dye sensitized solar cell is considered one of the most important technologies in the BIPV field, the transparent silicon based thin film solar cell fabricated by thin film processes has drawn attention as a novel alternative. When the selective transmitting layer is applied to the solar cell, the conversion efficiency is improved due to the re-reflection of infrared light into an absorber layer with the transmission of visible light through the solar cell. In this work, we prepared Al-Ti based oxide thin films using cost-effective sputter deposition and examined their selective transmitting characteristics with various compositions. The transmittance and reflectance of the Al-Ti based oxide thin film changed with the variation of its composition, and the selective transmitting property was observed in the sample with the 25 nm-thick AlTiO layer. It is considered that the realization of transparent solar cells and the improvement of their conversion efficiency can be achieved by introducing the Al-Ti based selective transmitting layer.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.5
• /
• pp.285-295
• /
• 1999

Electroluminescent(EL) devices based on organic materials have been of great interest due to their possible applications for large-area flat-panel displays. They are attractive because of their capability of multi-color emission, and low operation voltage. An approach to realize such device characteristics is to use active layers of lanthanide complexes with their inherent extremely sharp emission bands in stead of commonly known organic dyes. In general, organic molecular compounds show emission due to their $\pi$-$\pi*$ transitions resulting in luminescence bandwidths of about 80 to 100nm. Spin statistic estimations lead to an internal quantum efficiency of dye-based EL devices limited to 25%. On the contrary, the fluorescence of lanthanide complexes is based on an intramolecular energy transfer from the triplet of the organic ligand to the 4f energy states of the ion. Therefore, theoretical internal quantum efficiency is principally not limited. In this study, Powders of TPD, $Eu(TTA)_3(phen) and AlQ_3$ in a boat were subsequently heated to their sublimation temperatures to obtain the growth rates of 0.2~0.3nm/s. Organic electrolumnescent devices(OELD) with a structure of $glass substrate/ITO/Eu(TTA)_3(phen)/AI, glass substrate/ITO/TPD/Eu(TTA)_3(phen)/AI and glass substrate/ITO/TPD/Eu(TTA)_3(phen)/AIQ_3AI$ structures were fabricated by vacuum evaporation method, where aromatic diamine(TPD) was used as a hole transporting material, $Eu(TTA)_3(phen)$ as an emitting material, and Tris(8-hydroxyquinoline)Aluminum$(AlQ_3)$ as an electron transporting layer. Electroluminescent(EL) and current density-voltage(J-V) characteristics of these OELDs with various thickness of $Eu(TTA)_3(phen)$ layer were investigated. The triple-layer structure devices show the red EL spectrum at the wavelength of 613nm, which is almost the same as the photoluminescent(PL) spectrum of $Eu(TTA)_3(phen)$.It was found from the J-V characteristics of these devices that the current density is not dependent on the applied field, but on the electric field.