• 임상간호연구
• /
• 제21권2호
• /
• pp.188-195
• /
• 2015

Purpose: The purpose of this study was to evaluate the appropriateness of the replacement time intervals of 18 gauge peripheral intravenous catheters (PICs) by investigating the development of phlebitis. Methods: The subjects were 200 hospitalized patients over 18 yrs old aged who have 18 gauge PICs placed for surgery. After the insertion of PICs, the researcher monitored the insertion site daily for 96 hours for any signs of phlebitis. Results: Phlebitis developed in 25.7% of patients. Patients who developed phlebitis were significantly older and were receiving fluids with faster infusion rate. However, patients with and without phlebitis were not different by gender, insertion site, fluid osmolality, or pH of drugs administered. The incidence rate of phlebitis was higher than 10%(12.9%) starting 24~48 hours after the insertion of 18 gauge PICs. Conclusion: It is recommended to replace 18 gauge PICs within 24~48 hours after insertion. Close monitoring of the PICs insertion site for the signs of phlebitis is recommended.

• 한국운동역학회지
• /
• 제31권4호
• /
• pp.290-296
• /
• 2021

Objective: The purpose of this research is to examine the effects of three types of different running shoes with different properties on impact variables (PVRGF and VLR) and the lower extremity joint's dynamic stability variables (LyEs of DPA, IEA, FEA, DPAV, IEAV, and FEAV) during running. Method: The participants in this research were 12 males (Age: 22.0 ± 3.3 years, Height: 177.2 ± 4.1 cm, Weight: 74.3 ± 9.6 kg). One type of N company's running shoes and two types (FA, FB) of F company's running shoes were used. As for the properties of the running shoes, thickness (mm), dwell time (ms), peak acceleration (m/s2), and energy return (%) were measured. The motions running at 3.5 m/s on a treadmill (Instrumented treadmill, Bertec, USA) wearing each type of running shoes were analyzed. Results: Although the VLR of the thick running shoes (FB) was smaller than that of the other running shoes (N, FA), the LyEs of PVGRF and DPA were larger (p<.05). Even though the running shoes' dwell time (i.e., impact absorption time) and peak acceleration showed a positive correlation with the LyEs of DPAV, IEAV, and FEAV, the energy return showed a negative correlation (p<.05). Conclusion: Our results indicated that the running shoes with excellent impact absorption function are predicted to be suitable for running beginners who need to reduce the burden of the lower extremity joint during running. The running shoes with excellent energy return are expected to be suitable for mid-and long-distance running elite athletes or marathoners to whom stability and consistency are essential during running.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.533-533
• /
• 2000

Stabilization of piecewise-linear systems with unknown switching information is presented. The current subsystem is identified from the output, and the identified subsystem is used for the observer-based control. The stability of the overall system is proven and the performance is evaluated via a simulation.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.74-78
• /
• 2002

Ultra-Precision CNC polishing system including on-machine measurement system, a corrective polishing algorithm is developed. The unit removal profiles for various polishing tools and analyzed and tested and dwell time distributions and residual errors for a target removal shape are calculated. The corrective polishing algorithm is tested with various workpieces. This result will be used for the software development of the CNC polishing system.

• 한국통신학회논문지
• /
• 제21권3호
• /
• pp.684-691
• /
• 1996

Since the period of a spreading code in DS/SS communication systems is generally long, it is necessary to make the code acquisition as fast as possible. The code acquisition time can be sued as a measure to evaluate the performance of code acquisition systems. The search rate of serial search codee acquisition system used in the coventional CDMA cellular system is lower than that of the matched filter technique. In order to reduce the code acquisition time, this paper proposes hybrid code acquisition system composed filters combined with serial search blocks. In the proposed system, the matched filter sweeps possible code phases fast and the acquired phase information is verified by the serial search block. The mean and the variance of its acquisition time are calculated and compared with those of double dwell serial search system. The results indicate better performance of the proposed system by yielding its small vaues of the mean and the variance of code acquisition time.

• Journal of Advanced Marine Engineering and Technology
• /
• 제34권1호
• /
• pp.37-45
• /
• 2010

본 논문에서는 박용 디젤엔진에서 NOx와 Soot의 배출량을 동시에 줄이기 위해 파일럿 분사의 특성을 알아보기 위해서 수치해석을 수행하였다. 수치해석결과의 압력 선도는 실험 결과와 일치시켜 1.6% 범위의 적은 오차에서 예측함으로써 수치해석의 신뢰성을 검증하였고 총 분사량이 고정된 상태에서 분사시기, 분사휴지 기간, 분사율을 주요 파라미터로 적용하였다. 파일럿 분사시기의 변화는 연료의 자발화와 열발생률에 영향을 주는 것을 결과로부터 알 수 있었다. 결과로부터 분사휴지기간이 $10^{\circ}$CA, 분사율이 0.022kg/s인 경우에 실린더의 압력 손실이 없는 범위에서 NOx와 Soot를 동시에 저감하는 결과를 얻을 수 있었다.

• 한국정밀공학회지
• /
• 제30권3호
• /
• pp.324-330
• /
• 2013

This paper describes a novel method to surface large optics mirror with an extremely high hardness, which could replace the high cost of the repetitive off-line measurement steps and the large ultra-precision grinding machine with ultra-positioning control of 10 nm resolution. A lot of diamond pellet to be attached on the convex aluminum base consists of a grinding tool for the concave large mirror, and the tool was pressured down on the large mirror blank. The tool motion at an interval on the spiral path was controlled with each feed rate as the dwell time in the conventional computer-controlled polishing. The shape to be surfaced was measured directly by a touch probe on the machine without any separation of the mirror blank. Total 40 iterative steps of the surfacing and measurement could demonstrate the form error of RMS $7.8{\mu}m$, surface roughness of Ra $0.2{\mu}m$ for the mirror blank with diameter of 1 m and spherical radius of curvature of 5400 mm.

• 대한기계학회논문집A
• /
• 제34권11호
• /
• pp.1567-1573
• /
• 2010

레이저 프린터에 의해 만들어진 인쇄물 및 활자는 토너 박막과 종이 사이의 계면력에 따라 그 품질과 신뢰성이 크게 좌우된다. 현재 토너 박막의 계면력을 측정하기 위한 방법은 peel-off test로써 이는 토너 박막의 표면 특성, 테이프의 점착특성, 그리고 실험을 수행하는 작업자의 성향과 같은 여러 복합인자들에 따라 측정되는 계면력 특성이 변한다는 문제를 가지고 있다. 따라서 본 연구에서는 peel-off test에서 측정된 계면력에 영향을 미치는 주요인자에 따른 토너 박막의 계면력과 박리 정도의 기여도를 다구찌 실험계획법을 사용하여 알아보았다. 그 결과, 토너 박막의 계면력은 주요인자들의 수준이 커질수록 그 영향력이 크게 증가하지만 토너 박막의 박리 정도는 그렇지 않았다. 또한, 본 연구의 주요인자들에 대한 조건에서 가장 큰 기여도를 가지는 인자는 시편의 이송속도로 나타났다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.490-497
• /
• 2011

When operating Express and Standard trains, which run with two different scheduled time, in a single line with limited number of side tracks for overtaking standard trains, it is required to have various modeling methodologies and simulations in order to calculate an optimum headway to maximize the capacity of the line with the best scheduled time. Especially it is inevitable that following trains have to slow down or stop in the middle of their operations due to the preceding trains, in case it is inappropriate controlled about either in which station an overtaking should be taken or how long it should be. This study is to analyze TPS data which have been produced with a simulation program which the team has invented to optimize Express and Standard mixed traffic plan and to introduce an algorism which shows detected conflict data, calculates appropriate dwell time after getting overtaken and helps to decide stations for overtaking.

• 대한토목학회논문집
• /
• 제8권1호
• /
• pp.25-32
• /
• 1988

교차로 정지선을 출발한 차량군(車輛群)은 도로를 주행하는 동안 분산되며, 교차로의 지체시간은 분산된 교통류의 정지선 도착분포(到着分布)에 의해 결정된다. 본 연구는 여행시간분포조사(旅行時間分布調査)를 통하여 우리나라 차량군(車輛群)의 분산특성, 특히 승용차와 버스의 차량군(車輛群) 분리현상에 관하여 조사하였다. 그리고, 이러한 조사결과를 토대로 버스군(群)의 분리특성을 감안한 교차로 지체시간의 정확한 분석방법을 제시하였다.