• Journal of Korean Society for Atmospheric Environment
• /
• v.21 no.6
• /
• pp.585-592
• /
• 2005

Nowadays it has been strongly required to control emissions from vehicles specially in diesel engines because of increasing number of vehicle in korea. This research aims to provide with some of deterioration factors on vehicles for emissions characteristics and the test was done on an electronically controlled heavy-duty diesel engine under severe driving conditions such as 1200 driving hours, 220,000 km driving distance and a full load. Under various driving conditions, CO, HC, $NO_{x}$, PM and Soots emissions were estimated under D-13 mode and D-3 mode respectively. CO emission was not changed until 500 running hours, and as engine aging is progressed THC was not changed until 500 running hours but it decreased to about $33\%,\;NO_{x}$ decreased constantly but on the other hand PM increased up to $6.9\%$ during the aging process.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.685-688
• /
• 2015

A phase-shift full-bridge converter is widely used conventional converter. If the input power change in the variation of the output voltage, there is a time interval freewheeling according to a duty change. This is a factor of reducing the efficiency. In this paper, we propose a method for improving the efficiency of the converter/inverter systems that require high efficiency in the ESS. The proposed method was used for the duty control for solving the fail problem ZVS(Zero Voltage Switching) in Freewheeling interval. The proposed method was verified by experiments.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.5
• /
• pp.803-807
• /
• 2008

A making process of DSC(dye sensitized solar cell) was presented. In general, Photo electrodes of DSC was made by using colloid paste of nano $TiO_2$ and processing of Doctor-blade printing and high temperature sintering for porous structure. These methods lead to cracks on $TiO_2$ surface and ununiform of $TiO_2$ thickness. This phenomenon is one factor that makes low efficiency to cells. After $TiO_2$ printing on TCO glass, a physical vibration was adapted for reducing ununiform of $TiO_2$ thickness. And a thermal treatment at low temperature(under $75^{\circ}C$) was adapted for reducing cracks on $TiO_2$ surface. In this paper, we have designed and manufactured an ultrasonic circuit (100W, frequency and duty variable) and a thermal equipment. Then, we have optimized forcing time, frequency and duty of ultrasonic irradiation and thermal heating for surface treatment of photo-electrode of DSC. In I-V characteristic test of DSC, ultrasonic and thermal treated DSC shows 19% improved its efficiency against monolithic DSC. And it shows stability of light-harvesting from drastically change of light irradiation test.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.4 no.1
• /
• pp.20-24
• /
• 2009

sensor node work limited energy. It is undesirable or impossible to replace the batteries that are depleted of energy because of characteristics of the sensor network. Due to the specific energy constrained environment, MAC design for sensor networks generally has to take energy consumption as one of its primary concerns. But in sensor networks, latency has been a key factor affecting the applicability of sensor networks to some delay-sensitive applications. Therefore, we propose MAC protocols based DSMAC in this paper. Which is able to dynamically change the sleeping and duty cycle of sensors is adjusted to adapt to packet amounts in buffer. Proposed MAC has energy efficiency and low latency, compared DSMAC.

• Journal of the Korean Home Economics Association
• /
• v.47 no.8
• /
• pp.37-52
• /
• 2009

The purpose of this study was to examine Korean-Chinese parent-child relationship values through Korean proverbs on parent-child relationships. A total of 233 Korean-Chinese who reside in Yungil, China participated in this study. The participants were recruited through Korean-Chinese preschools and elementary schools. They completed a questionnaire which asked to what extent they agreed or disagreed with Korean proverbs. The items were classified into four categories: filial piety (duty), child-care and education, childrearing practices, and traditional son preference (and daughter discrimination). The results showed that, although the participants highly agreed to the meaning of the proverbs, they seldom used Korean proverbs in their daily lives. The findings concluded that the participants generally manifested a traditional value of filial piety or duty. Also, the findings showed that more fathers acclaimed the value of traditional son preference (and daughter discrimination) than mothers. Finally, the degree of familiarity with Korean culture was found to be a major factor in explaining differences in levels of agreement or disagreement to the proverbs. Since Korean-Chinese ethnic minority groups in China tend to adhere to traditional Korean values, they might encounter more challenges assimilating into the mainstream Chinese culture.

• Journal of the Korean Vacuum Society
• /
• v.10 no.1
• /
• pp.27-30
• /
• 2001

Electromigration Phenomena in Al-1%Si thin film interconnections under DC and PDC conditions were investigated. Thin film interconnections with $SiO_2$ and PSG/$SiO_2$ dielectric passivation layer were formed by a standard photolithography process method and test line lengths were 100, 400, 800, 1200, and 1600 $\mu\textrm{m}$. The current density of $1.19\times10^7\textrm{A/cm}^2$ was stressed in Al-1%Si thin film interconnections under DC condition. The current density of $1.19\times10^7\textrm{A/cm}^2$ was also applied under PDC condition at the frequency of 1 Hz with the duty factor of 0.5. The electromigration resistance of PSG/SiO2 dielectric passivation test line was stronger than $SiO_2$ dielectric passivation test line. The lifetime under PDC was 2-4 times longer than DC condition. As the thin film interconnection line increased, the lifetime decreased and saturated over the critical length. Failure patterns by an electromigration were dominated by void-induced electrical open and hillock-induced electrical short.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.12
• /
• pp.1311-1320
• /
• 2003

This paper proposed the estimating method of electromagnetic dosimetric reliability at in-vivo and in-vitro experiments. For more accurate consequences of these researches, we have tried to find out any correlations among output power, power density and specific absorption rate(SAR) with the results of in-vivo, in-vitro tests and SAR reports of cellular phone and PDA. In the case of in-vivo tests, the power density has close statistical correlations with SAR value and in the event of in-vitro tests, the output power has considerable statistical correlations with SAR containing duty factor. We analysed the coefficient of determination to estimate the dosimeoic uncertainty. If we use this method before evaluating techniques of measurement and analysis at both in-vivo and in-vitro experiments, we will conduct more accurate reliability test.

• Journal of Convergence for Information Technology
• /
• v.10 no.8
• /
• pp.152-160
• /
• 2020

The purpose of this study was to analyze the effects of neglect and abuse of parents, a sub-factor of domestic violence victimization experience, on the career identity status, the mediate effects of adapting to school life in the process, and the control effects of the experience of using local children center service experience. To this end, 419 people were extracted from the data of the first year and sixth year of the children's panel at the local children's center. The main analysis results are as follows. First, parents' neglect, a sub-factor of domestic violence damage experience, was found to have a negative mediation effect on youth's sense of direction. Second, adapting to school life are being partially mediate effect in the relationship between neglect of duty and career identity. The practical implications of necessary for the forming career identity for teenager using local child center and the basis data for developing programs were derived.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.1196-1198
• /
• 2002

A novel single-stage half-bridge high frequency resonant inverter using ZVS(Zero Voltage Switching) with high input power factor suitable for induction heating applications is presented in this paper. The proposed high frequency resonant inverter integrates half-bridge boost rectifier as power factor corrector(PFC) and half-bridge resonant inverter into a single stage. The input stage of the half-bridge boost rectifier is working in discontinuous conduction mode (DCM) with constant duty cycle and variable switching frequency. So that a high power factor is achieved naturally. Simulation results through the Pspice have demonstrated the feasibility of the proposed inverter. This proposed inverter will be able to be practically used as a power supply in various fields as induction heating applications, DC-DC converter etc.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.34-36
• /
• 2008

This paper is given a full detail of mathematical analyses of input current for novel active type power factor correction(PFC) AC-DC converter of step up-down added electric isolation. These are compared with harmonics components of input current for a conventional PFC converter of electric isolation type. The proposed PFC converter is constructed in using a new loss-less snubber circuit to achieve a soft switching of control device. Also the proposed converter for discontinuous conduction mode(DCM) eliminates the complicated circuit control requirement and reduces the size of components. The input current waveform in the proposed converter is got to be a sinusoidal form of discontinuous pulse in proportion to magnitude of ac input voltage under the constant duty cycle switching. Therefore, input power factor is nearly unity and the control method is simple. Particularly, the stored energy of loss-less snubber capacitor is recovered with input side and increases input current from resonant operation. The result is that input power factor of the proposed converter is higher than that of a conventional PFC converter. Some simulative results on computer and experimental results are included to confirm the validity of the analytical results.