• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 2001년도 추계 학술발표회 논문집
• /
• pp.279-284
• /
• 2001

• 디지털융복합연구
• /
• 제20권2호
• /
• pp.339-344
• /
• 2022

본 연구에서는 공장 및 대형 시설에서 사용되고 있는 전기집진장치에 대하여 미세분진이 효율적으로 얼마나 제거 될 수 있는지에 대한 내용이다. 미세분진 제거 효율을 평가한 결과는 다음과 같다. 10,000 V 에서는 Efficiency method I은 68.1 % 를 보였고, Efficiency method I는 58.6 %로 Efficiency method I의 효율 보다 낮은 효율을 보였다. 5,000 V 에서는 Efficiency method I은 57.6 %를 보였고, Efficiency method II는 51.6 %로 Efficiency method I보다 낮은 효율을 보였다. 2,500 V 에서는 Efficiency method I은 50.3 %를 보였고, Efficiency method II는 24.4 %로 Efficiency method I보다 낮은 효율을 보였다. Efficiency method I의 경우 전 분진농도와 필터 통과 후 분진농도을 활용하여 계산한 효율이다. Efficiency method II는 필터 후의 공기와 오염된 공기가 혼합되는 환경에서 조금 더 정확한 효율을 측정하기 위해 Efficiency method II를 계산하였다. Efficiency method II는 Efficiency method I보다 낮은 효율을 나타내었다. 전기집진장치 실험 결과 10,000 V에서 집진 성능이 가장 높게 나타났으며, 그 다음 5,000 V, 2,500 V의 순을 보였다.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 2002년도 춘계 학술발표회 논문집
• /
• pp.223-226
• /
• 2002

본 연구에서는 전기집진 기술과 여과집진 기술의 조합에 의한 먼지입자의 포집성능 상승효과를 최대한 높일 수 있는 먼지부하 저감형 하이브리드 집진장치(Hi-Filter)를 개발하기 위해 실험실 규모의 장치를 이용한 실험을 통하여 장치의 최적 형상을 결정하고 그 성능을 검증하였다.(중략)

• 조명전기설비학회논문지
• /
• 제25권7호
• /
• pp.83-91
• /
• 2011

Even if smoke, fumes, mist or dust particles are removed by electrostatic precipitators (ESPs), the occurrence of ozone, which is harmful to human body, has to be severely restricted in the indoor environments of hospitals, offices, and workshops. Therefore, the two-stage ESP generating positive corona at the ionizer is typically used because it creates less ozone than the two-stage ESP generating negative corona at the ionizer. In order to predict the collection performance and the optimal design of the two-stage ESP applied to positive high-voltage, particle concentration is experimentally investigated in this paper. In addition, particle motion within the collector section is also numerically analyzed. The positive corona discharge current of the ionizer is found to be affected by the applied voltage in the collector section but less so by the particle concentration. Particle concentration shows a minimum near the high voltage electrode of the collector section. The minimum value of the collection efficiency is almost proportional to gas velocity. When the collector length decreases, the minimum value of the collection efficiency increases. Charged particles entering the collector region are linearly deflected towards the grounded plate by an electric field. From the above experimental and numerical results, two empirical equations on the concentration ratio and the collection efficiency are derived, and are in good agreement with the experimental data.

• 한국생산제조학회지
• /
• 제22권2호
• /
• pp.223-227
• /
• 2013

Dust collecting performance of cyclone collector for oil mist was alalyzed in the study. The purposes of using cutting fluid during cutting have been colling, lubricating, chip washing and anti-corroding. However, the present manufactaring industry restricts the use of cutting fluid because cutting fluid confains poisonous substances which are harmful to the human body. Also, the optimum design oil-mist collector. The new oil mist collector was designed. In the near future, this device must be tested in the real machining center and CNC machine. Cutting using oil-mist showed better cutting characteristics than dry, air and fluid cutting with respect to by cutting force, tool wear and surface roughness. The model(A, B Type cyclone) of the set of fixture and alveolus are made by using a CAE software. Finally, we have obtained a model A Type solution by using orthogonal array. Therefore, it could be confirmed that as the model-A was increased and model-B was decreased, cut diameter was decreased.

• 한국산업융합학회 논문집
• /
• 제20권1호
• /
• pp.67-73
• /
• 2017

This study aimed to analyze the fluid inside the ceramic filtration dust collection system which was assumed to be a stationary 3-dimensional turbulence. The fluid dynamics data necessary for performance curves were obtained based on the analysis results. The governing equations used to compute the velocity distribution and pressure inside the catalyst converter were expressed with continuity and momentum equations. Furthermore, the ${\kappa}-{\varepsilon}$ turbulence model, already validated by the industry(coal factory, high temperature dust collector) was used for the study. Of a total of three computational models employed, Model-1 served as the basis for CFD analysis which took measurements in increments of 70mm.

• 한국산업융합학회 논문집
• /
• 제21권6호
• /
• pp.355-360
• /
• 2018

The product developed in this study is a ceramic catalyst filter for 1 ton heavy-oil boiler that can simultaneously process dust and nitrogen oxides. This has been developed for simultaneous processing of nitrogen oxides and dust at high efficiency of hot exhaust gas (approximately $300^{\circ}C$) generated after burning 1 ton heavy oil boiler. Ceramic catalytic filters for 1 tonne heavy-duty glass display are technologies that remove 90% of dust and 85% or more of nitrogen oxides. This is an improved new technology to integrate exhaust ventilation and desiccation devices into one, thereby reducing the production process and improving the economy. To this end, the performance test of the catalytic filter for heavy oil boilers was carried out, and the durability of the PLC circuit was constructed.

• 공업화학
• /
• 제20권5호
• /
• pp.547-552
• /
• 2009

본 연구에서는 fiber reinforced plastics (FRP) 제품 가공시 발생하는 분진 및 악취 물질로 인한 작업현장의 악조건을 개선하기 위하여 activated carbon fiber (ACF) 장착 하이브리드 백필터를 개발하였다. FRP 제조업체 2개사에 ACF 백필터를 설치함에 있어 천장, 벽하단 부분에 덕트를 설치함은 물론 이동식 집진 덕트를 설치함으로써 집진효율을 높였다. 펄스젯트식 탈진방식을 채택하여 효과적인 시스템 운영을 유도함으로써 작업환경을 개선하고자 하였다. 하이브리드 백필터 시스템 운용시 이에 따르는 분진과 악취에 대한 제거동향을 고찰하였다.

• Journal of Korean Society for Atmospheric Environment
• /
• 제17권E2호
• /
• pp.53-59
• /
• 2001

A hybrid dust-collector combining electrostatic charging with fabric filtration method was developed, and its performance characteristics were evaluated in this study. Charged particles build porous dendritic structure on the surfaces of filter by electrostatic attraction, increasing the collection efficiency of dust particles and reducing the pressure drop through the deposited dust layer and filter media. The cleaning performance of the dust layer is improved because the dendritic structured dust layer can be removed more easily by pulse jet cleaning flow. The results of the experiment showed a reduction of fine particle emission of 37% and the energy saving of 13% by precharging dust particles before filtration.

• 설비공학논문집
• /
• 제23권2호
• /
• pp.126-131
• /
• 2011

Cyclone, a type of particle collector widely used in the field of ambient sampling and industrial particulate control, is the principal type of gas-solids separator that uses a centrifugal force. The goal of this study is to design and evaluate the cyclone that can be used for the household vacuum cleaners. A multi cyclone with a 1st cyclone and several 2nd cyclones is designed to improve dust collection efficiency. The dust collection efficiency and the suction power of 1st cyclone are evaluated. And the dust collection efficiency and the suction power of multi cyclone are evaluated according to various sizes of inlet and vortex finder. As a result, a cone shape porous filter has better dust collection efficiency than a cylinder shape porous filter. The dust collection efficiency of a multi cyclone is 3.5% greater than that of a single cyclone.