• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1781-1784
• /
• 2007

The increase of repetition rate, the dithering of laser optics, and the extension of pulse duration time are major approaches in improving the picture quality of AMOLEDs fabricated by excimer laser crystallization (ELC). Advanced solid phase crystallization (ASPC) has been developed to improve the uniformity and the process cost. Even though the mobility of ASPC-TFT is lower than that of ELC-TFT, it is high enough to drive AMOLED pixels.

• 한국물환경학회지
• /
• 제24권3호
• /
• pp.297-305
• /
• 2008

It is necessary to select proper reduction methods and to calculate reasonably reduction amount for making good practice of the reduction scheme. Moreover, it is suggested that the reduction amount have to be distributed properly during the planning period. In other words, it has not to be concentrated on the specific year (especially final year of the planning period). The reason why, if the reduction amount concentrate on the final year of the planning period, allotment loading amount could not be achieved in some cases (e.g., insufficiency of budget, extension of construction duration). Even though much of the budget have been supported from national treasury (about 50%), it is thought the role of the local government must be strengthened gradually.

• 한국통신학회논문지
• /
• 제28권9B호
• /
• pp.806-812
• /
• 2003

본 논문에서는 고객의 다양한 감성에 기반한 웹 디자인을 통해 사용자들로 하여금 새로운 경험을 체험하도록 정적과 동적 요소에 따른 16개의 감성 차원을 모델링하고 페이지 레이아웃, 배경색, 움직임 좌표 등의 감성 데이터베이스를 활용하여 고객의 선호 감성에 따라서 웹 페이지가 재구성되는 유무선 인터넷 서비스 시스템을 제안한다. 실험 결과 기존 시스템보다 세대별 감성 만족도 및 웹 사이트의 평균체류시간이 증가되었음을 모의 실험을 통해서 확인하였다.

• 대한인간공학회지
• /
• 제14권2호
• /
• pp.1-14
• /
• 1995

Neuromuscular difference between normal subjects and low-back pain patients has been identified in terms of neural excitation signal measured by Electromyography (EMG) under the dynamic flexion/extension trunk motion. Ten healthy subjects and ten low-back pain patients were recruited for this study. New parameters and normalization technique were introduced to quantify the muscle excitation pattern among the flexor-extensor pairs of muscles : rectus abdominis (RA)-erector spinae (ES at L1 and L5 level), external oblique (EO)-internal oblique (IO), rectus femoris (quadricep : QUD)-biceps femoris( hamstring : HAM), and tibialis anterior (TA)-gastrocnemius (GAS). Results indicated that the temporal EMG pattern such as peak timing difference between the hip flexor (QUD) and extensor (HAM) and the duration of coexcitation between ES at L5 and RA muscle pairs showed a statistically significant difference between normal subjects and low-back pain patients. Improtantly, this study presented a new technique to identify the dynamic muscle excitation pattern that canb be least affected by EMG-length-velocity relationship. Further study can performed to validate this method for clinical application to quantitatively identify the low-back pain patients in the future.

• 한국분무공학회지
• /
• 제23권2호
• /
• pp.96-101
• /
• 2018

The purpose of this study is to investigate the effect of water injection on combustion characteristics of gasoline direct injection (GDI) engine with turbo-charger under low-load operating condition. The test engine used in this study has four-cylinder and 10.2 of compression ratio. In order to study the effect of water injection ratio on combustion characteristics, the water was injected into the intake port from 10% to 50%, based on fuel injection quantity. From the experiment, it revealed that the water injection induced the improvement of fuel economy because of the advance of spark-timing by the reduction of in-cylinder temperature. In addition, the water injection caused the prolong of extension of the ignition delay and slight increase of burn duration.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 A
• /
• pp.360-362
• /
• 2003

In operation of distribution system, DGs(Distributed Generations) are installed as an alternative of extension and establishment of substations, transmission and distribution lines according to increasing power demand. Optimal capacity and allocation of DGs improve power quality and reliability. This paper proposes a method for determining the optimal number, size and allocation of DGs needed to minimize operation cost of distribution system. Capacity of DGs for economic operation of distribution system can be estimated by the load growth and line capacity during operation planning duration. DG allocations are determined to minimize total cost with failure rate and annual reliability cost of each load point using GA(Genetic Algorithm).

• KIEE International Transactions on Power Engineering
• /
• 제5A권1호
• /
• pp.9-15
• /
• 2005

In the operation of distribution systems, DGs (Distributed Generations) are installed as an alternative to extension and the establishment of substations, transmission and distribution lines according to the increasing power demand. In the operation planning of DGs, determining optimal capacity and allocation achieves economical profitability and improves the reliability of power distribution systems. This paper proposes a determining method for the optimal number, size and allocation of DGs in order to minimize the operation costs of distribution systems. Capacity and allocation of DGs for economical operation planning duration are determined to minimize total cost composed with power buying cost, operation cost of DGs, loss cost and outage cost using the GA (Genetic Algorithm).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1713-1715
• /
• 2007

Measurement of network traffic have shown that the self-similarity is a ubiquitous phenomenon spanning across diverse network environments. In previous work, we have explored the feasibility of exploiting the long-range correlation structure in a self-similar traffic for the congestion control. We have advanced the framework of the multiple time scale congestion control and showed its effectiveness at enhancing performance for the rate-based feedback control. Our contribution is threefold. First, we define a modular extension of the TCP-a function called with a simple interface-that applies to various flavours of the TCP-e.g., Tahoe, Reno, Vegas and show that it significantly improves performance. Second, we show that a multiple time scale TCP endows the underlying feedback control with proactivity by bridging the uncertainty gap associated with reactive controls which is exacerbated by the high delay-bandwidth product in broadband wide area networks. Third, we investigate the influence of the three traffic control dimensions-tracking ability, connection duration, and fairness-on performance.

• 중국학논총
• /
• 제69호
• /
• pp.121-143
• /
• 2021

'老' refers to the old man with the characteristics of being aged in the original meaning 'to be aged' (adjective), which is a metonymy of 'substituting the whole with a part'. In combination with nouns, '老' uses a lot of metaphorical expressions that are understood through animals closest to the attributes of people with aged characteristics, plants and objects. '老' can be extended to the meaning of 'the survival time, duration, recognition time, and existence time of a person, animal, plant, or object are long', or 'the survival time is over', which can be said to be a metonymy of 'substituting cause with result'. An experienced target respected by people on a positive level and a target with banal thoughts, habits, nature, and personality on the negative level can also be conceptualized and expressed as '老'.

• International Journal of Korean Welding Society
• /
• 제1권2호
• /
• pp.1-6
• /
• 2001

A weld quality assessment method is proposed in this work, which can be applied to the short-circuit mode in GMAW. Information about the welding signal trajectory, distribution of the signal duration at each sub-regions and short-circuit frequency is used to evaluate the weld quality. The weighted penalty, which is determined experimentally, is imposed for each abnormal signal. Performance of the proposed method is compared with the Simpson's method under the conditions of shielding gas reduction, workpiece surface contamination and joint gap in the butt and fillet welds. Although the proposed method predicts the weld quality with reasonable accuracy, further modification and extension to other metal transfer modes are needed as a further study.