• Journal of the Korea Concrete Institute
• /
• v.28 no.3
• /
• pp.309-316
• /
• 2016

In this study, performance of hardening accelerator types which promote setting and hardening of cement has been reviewed in order to develop early age strength of concrete with compressive strength of 21~27 MPa after examination of strength development of the concrete at early age according to curing temperature and unit cement(binder) content. As results, soluble mineral salt showed better hardening acceleration effect than organic salt in the scope of this study. Also, hydration reaction accelerating effect of $C_3S$ by Soluble mineral salt is effective on development of early age compressive strength and it was shown that the Pt's hydration reaction accelerating effect was the best. Construction duration reduction can be expected by securing compressive strength for prevention of early aged freezing damage in 25hour-curing time under curing temperature at $15^{\circ}C$. Also, it was shown that compressive strength of specimen cured at $5^{\circ}C$ was similar with plain specimen cured at $10^{\circ}C$. Therefore, it is expected that fuel costs and carbon dioxide can be reduced when the same construction duration is considered.

• Journal of Radiation Protection and Research
• /
• v.24 no.2
• /
• pp.65-72
• /
• 1999

A methodology for determining the optimal durations of the use of contaminated crops as feedstuffs of cattle was designed based on the cost-benefit analysis method. The results of application for pigs, an omnivorous cattle, were discussed for the hypothetical deposition of radionuclides on August 15 when a number of crops are fully developed in Korean agricultural conditions. For investigating the relative cost-effectiveness of the use of contaminated crops as feedstuffs, the net benefit was compared with the case of the direct disposal of contaminated crops. The time-dependent radionuclide concentration in crops after the deposition was predicted using a dynamic food chain model DYNACON. The net benefit from the actions was quantitatively evaluated in terms of cost equivalent of doses and monetary costs of implementing the action. It depended on a number of factors such as radionuclides, variety of crops supplied as feedstuffs and duration of the actions. The use of contaminated crops as feedstuffs was more cost effective for $^{90}Sr\;or\;^{131}I$ deposition than for $^{137}Cs$ deposition.

• Anatomy and Cell Biology
• /
• v.57 no.2
• /
• pp.294-304
• /
• 2024

Type 2 diabetes mellitus is increasingly becoming more prevalent worldwide together with hospital care costs from secondary complications such as bone fractures. Femoral fracture risk is higher in diabetes. Therefore, this study aimed to assess the osteometric and microarchitecture of the femur of Zucker Diabetic Sprague-Dawley (ZDSD) femur. Ten-week-old male rats (n=38) consisting of 16 control Sprague-Dawley (SD) and 22 ZDSD rats were used. The rats were terminated at 20 weeks and others at 28 weeks of age to assess age, diabetes duration effects and its severity. Bilateral femora were taken for osteometry, bone mass measurements and micro-focus X-ray computed tomography scanning to assess the trabecular number (TbN), thickness (TbTh), spaces (TbSp), bone tissue volume to total volume (BV/TV) and volume (BV). Diabetic rats had shorter (except for 20-weeks-old), lighter, narrower, and less robust bones than SD controls that wered more robust. Although cortical area was similar in all diabatic and control rats, medullary canal area was the largest in ZDSD rats. This means that the diabetic rats bones were short, light and hollow. Diabetic rats aged 20 weeks had reduced BV, BV/TV, TbN with more spacing (TbSp). In contrast, the 28 weeks old diabetic rats only showed reduced BV and TbN. Discriminant function analysis revealed, for the first time, that osteometric parameters and TbTh, TbN, and TbSp were affected by diabetes. This knowledge is valuable in the management of diabetic complications.

• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.10 no.2
• /
• pp.61-67
• /
• 2014

The aim of this study was to analyze the clinical characteristics of patients with cognitive and behavioral impairments receiving dental treatment under general anesthesia (GA-dental treatment). From August 2007 to April 2014, information was collected from 475 patients who received GA-dental treatment at the Clinic for Persons with Disabilities, Seoul National University Dental Hospital. The demographic factors (gender, age, disability, medication, GA history, residency type, caregiver, meal type, oral hygiene maintenance, and cooperation level) and dental status (operating duration, DMFT, malocclusion, periodontal disease, tooth defect, and treatment protocol) of the patients were evaluated. DMFT and malocclusion levels were compared among the patients with ANOVA and Sheffe's post-hoc test, and chi-square test, respectively. The correlation between the demographic characteristics and dental status of the patients were analyzed with the Pearson's correction test. The mean age of the patients was 27.1 (7 - 83) years and they had intellectual disabilities (55.4%), developmental disorders (17.9%), brain disorders (16.6%), neurocognitive disorders (4.6%), or others (5.5%). The mean DMFT (DT) was 8.6 (5.2) with a significant difference among the disability types (p<0.05). The incidence of malocclusion was higher in patients with intellectual disabilities and brain disorders than in the other types (p<0.05). The operation time ($191.4{\pm}91.2min$) was correlated with decayed or endodontically-treated teeth (p<0.05). Special needs patients requiring GA-dental treatment showed unfavorable oral conditions. Dental practitioners experience time restrictions and additional costs under a GA setting. Treatment planning and decision-making can be efficiently facilitated by evaluating the clinical characteristics of the patients.

• Journal of Animal Science and Technology
• /
• v.59 no.3
• /
• pp.5.1-5.10
• /
• 2017

Background: Bovine respiratory disease (BRD) is one of the leading causes of economic losses in the beef and dairy industry. Reliable antemortem tools for diagnosing BRD would improve the efficacy of treatment and reduce costs. Here we examined whether the relatively simple technique of thoracoscopy can support BRD diagnosis under field conditions. We also compared various equipment set-ups in order to optimize the safety and efficacy of the procedure. A total of 24 thoracoscopic procedures were performed in 17 calves diagnosed with BRD and in 2 healthy control calves. Rigid and flexible endoscopes and industrial videoscopes were tested using various insertion approaches. The suitability of the technique was assessed in terms of duration, volume of air extracted, visualization score, and image quality. Safety was assessed in terms of rectal temperature, body weight, breaths/min, presence of fibrinogen, pain score, recovery time, intraoperative complications and risk of laceration or threatening collapse. Results: Insertion of a flexible endoscope via a right, dorso-caudal approach at the $5^{th}$ intercostal space allowed complete examination of the right lung in 15 min, as well as identification of main lung lesions and adherences in calves with BRD, without compromising calf welfare. While the dorso-caudal approach was optimal, it was associated with substantial discomfort when rigid endoscopes were used, minimal complications or mortality due to thoracoscopy were observed up to 28 days after the procedure. Videoscopes were as safe and easy to use as endoscopes, but endoscopes provided better image quality. Conclusion: This study provides the first field evidence that thoracoscopy can be safe to explore BRD-diseased calves. These results justify a larger study to rigorously assess the diagnostic performance of the technique.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.33 no.12
• /
• pp.37-44
• /
• 2017

Due to structural characteristics, construction costs and duration of a modular system would be saved by minimizing the schedule on the job site. As such, it is crucial to develop a connection that can guarantee stiffness while allowing for simple assembling. Particularly, the mid- to high-rise construction of the modular system necessitates the securing of the structural stability and seismic performance of multi-unit frames and connections, and thus, the stiffness of unit-assembled structures needs to be re-evaluated and designed. However, evaluating a frame consisting of slender members and reinforcing materials is a complicated process. Therefore, the present study aims to examine the structural characteristics of a modular unit connection based a method for reinforcing connection brackets and hinges while minimizing the loss of the cross section. Toward this end, the study modeled the beam-to-column connection of a modular system with the proposed connection, and produced a specimen which was used to perform a cycling loading test. The study compared the initial stiffness, the attributes of the hysteretic behavior, and the maximum flexural moment, and observed whether the model acquired the seismic performance, compared to the flexural strength of the steel moment frame connection that is required by the Korean Building Code. The test results showed that the proposed connection produced a similar initial stiffness value to that of the theoretical equation, and its maximum strength exceeded the theoretical strength. Furthermore, the model with a larger ceiling bracket showed higher seismic performance, which was further increased by the reinforcement of the plate.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.622-627
• /
• 2009

Business process engineering (BPE) is a top-down management approach for increasing efficiency and productivity through radical and fundamental changes to the business processes of the organization. BPE requires firms to initially develop a model of the existing business processes of the firm to distinguish functional tasks from processes used for coordinating inputs, activities and outputs. The model is used for understanding the business processes in the organization and to simulate the effect of changes to the processes. The model can also be used to justify business processes, which involves assessing whether the business process provides value to the customer in its current configuration. Justification requires a careful examination of the key business processes used by the firm to identify systemic shortcomings in the process and to create a new business process to produce greater efficiency. BPE also considers automating as many business processes as possible to increase operational efficiency and the integration of business process tasks. The construction industry has been slow to adopt BPE because of its project approach in which a major firm contracts with various functional service providers and regards each project as unique. The industry focuses on functional task efficiency rather than business process efficiency. There is no formal methodology or criteria for determining whether a business process is effective for a construction firm in its current configuration. The use of performance measures such as costs, task duration times or other metrics can be useful in evaluating the effectiveness of an existing business process and for modeling the possible outcome of a fundamental and radical change to the process.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6D
• /
• pp.927-933
• /
• 2006

The Variable Message Signs (VMS) are useful way to reduce the socio-economic costs due to the traffic congestions and delays by providing the information on traffic condition to drivers. This study provided a methodology to determine the locations of VMS's in terms of the minimization of the delay by applying the genetic algorithm. The optimal number of VMS's was also derived by the economic analysis based on the cost and the benefit. The simulation considered the variation of traffic volume, the frequency and duration of the incident, and the traffic conversion in order to reflect the real situation. I've made a scenario to consider traffic volume and incident, and it can undergo through changing different traffic volume and incident in time and days and seasons. And I've comprised two kinds of result, one is based on empirical studies, the other is based on Genetic Algorithm about optimal allocation VMS. This result of using optimal location VMS, reduce total travel time rather than preceding study based on normal location VMS and we can estimate optimal location VMS each one.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2008.10a
• /
• pp.464-486
• /
• 2008

Purpose. Electronic intermediaries (e-intermediaries) are gaining significance in international marketing with the rapid development of e-commerce. The goal of this study is to explain empirically what leads to a higher use of this relatively new exportation alternative. Relying on a resource-based view as our research foundation, we focus on information technology (IT) and non-IT factors as possible determinants. Further, this study brings arguments offered by transaction cost theorists to explain the other non-IT determinants. Methodology/Approach. Data are collected from small and medium-sized enterprises (SMEs) in the electronic industry in Korea and the U.S to ensure generalizability. Ordinary least square (OLS) regression is utilized to analyze the data. Findings. This study raises new issues regarding a relatively new type of exporting channel, e-intermediary. Exporting is regarded as the most appropriate strategy for SMEs in international commerce. A number of SMEs stay away from exporting due to limited resources or lack of knowledge regarding foreign markets. The findings in this study should help SMEs use e-intermediaries more widely by developing appropriate IT-related resources (IT-related human and relationship assets) and dealing with non-IT factors (international competence, environmental uncertainty, and duration of relationship) effectively. Originality/Value/Contribution. This study illustrates the significant role of e-intermediaries, which may help SMEs to penetrate the global market effectively. Finding relevant sources in the global e-marketplace is a challenge for non-experienced users like SMEs. This study proposes e-intermediaries as an effective alternative for them. Another contribution of this study is to show how the use of indirect exporting channels, e-intermediaries, decrease costs in exporting transactions. This study suggests an e-intermediary as a hybrid exporting channel to balance risk and profit.

• Journal of Preventive Medicine and Public Health
• /
• v.27 no.2 s.46
• /
• pp.299-312
• /
• 1994

This survey was performed to obtain the basic information for the prevention and management of occupational low back injury (LBI). The subjects of this survey were 952 workers (male, 892 ; female, 60) who had taken occupational LBI in some industries of Pusan area from January 1 to December 31, 1991. Observation period was 2.6 years from the beginning to the end of medical treatment. The obtained results were summarized as follows ; 1. The proportion of LBI workers was 15.9% of the workers who had taken any occpational injuries and 0.32% of all workers in this surveyed area. 2. 8.0% of the workers had taken LBI on the 1st day of employment and 55.2% of the workers were within one year, 91.4% of the workers were within 10 years according to cumulative frequency distribution. 3. Handling of heavy objects was the most common cause of LBI (32.0%) and fall down (26.9%) and slip down (16.3%) were the next in order. 4. The most common causes of both lumbar sprain and HNP were handling of heavy objects and that of lumbar fracture was fall down. 5. The mean duration for medical treatment of LBI workers was 143 days. 6. The total direct compensation cost for LBI workers was 6,736 million Won and the proportion of medical, resting, disability compensation costs were 25.0%, 37.0%, 38.0 % respectively. 7. The percentages of retreated workers and disabled workers were 11.9% (113 persons) and 22.9% (218 persons) of total LBI workers respectively.