• Korean Journal of Remote Sensing
• /
• v.38 no.5_2
• /
• pp.765-779
• /
• 2022

This study evaluates the accuracy in identifying the burned area in South Korea using multi-temporal data from Sentinel-2 MSI and Landsat 8/9 OLI. Spectral indices such as the Difference Normalized Burn Ratio (dNBR), Relative Difference Normalized Burn Ratio (RdNBR), and Burned Area Index (BAI) were used to identify the burned area in the March 2022 forest fire in Uljin. Based on the results of six indices, the accuracy to detect the burned area was assessed for four satellites using Sentinel-2 and Landsat 8/9, respectively. Sentinel-2 and Landsat 8/9 produce images every 16 and 10 days, respectively, although it is difficult to acquire clear images due to clouds. Furthermore, using images taken before and after a forest fire to examine the burned area results in a rapid shift because vegetation growth in South Korea began in April, making it difficult to detect. Because Sentinel-2 and Landsat 8/9 images from February to May are based on the same date, this study is able to compare the indices with a relatively high detection accuracy and gets over the temporal resolution limitation. The results of this study are expected to be applied in the development of new indices to detect burned areas and indices that are optimized to detect South Korean forest fires.

• Journal of Life Science
• /
• v.31 no.12
• /
• pp.1120-1127
• /
• 2021

Depression has a negative impact on social functioning due to its high prevalence and increased suicide rate, and is a disease with a high economic burden. Depression is related to diverse brain-related phenomena, such as neuroinflammation, synaptic dysfunction, and cognitive deficit. As antidepressant drugs used in clinical trials have shown poor therapeutic effects, antidepressant drugs that show rapid efficacy urgently need to be developed. Although studies on various genes, proteins, and signaling pathways related to depression have been conducted, the pathogenesis of depression has not been clearly elucidated. Sirtuin 1 is a nicotinamide-adenine dinucleotide- (NAD+-) dependent histone deacetylase and is involved in cell differentiation, apoptosis, autophagy, and cancer metabolism. Recent genetic studies found that sirtuin 1 is a potential target gene for depression. In addition, preclinical studies reported that sirtuin 1 signaling affects depression-like behavior. In this review, we attempt to present up-to-date knowledge of depression and sirtuin 1. We describe the various roles of sirtuin 1 in the regulation of glial activation, circadian rhythm, neurogenesis, and cognitive function and the effects of its expression on depression. Further, we discuss the effect of sirtuin 1 on the impairment of neural plasticity, one of the key mechanisms of depression, and the associated mechanisms of sirtuin 1.

• Clean Technology
• /
• v.28 no.4
• /
• pp.301-308
• /
• 2022

Since nanoporous silica aerogel was first synthesized in 1931, its potential as an ultra-lightweight superinsulation material has been steadily attracting attention. Silica aerogel is the best thermal insulation material to date. However, the potential applications of this lightweight material have so far been hindered by its inherent fragibility and brittleness arising from its ultra-porous nature. Although the monolithic form of silica aerogel has the best ultra-lightweight superinsulation properties, it cannot be used in this form. Instead it is used in the form of powders, particles, and blankets. However, these forms still have shortcomings. Silica aerogel is most widely applied in the form of a fiber-reinforced aerogel blanket, but this form is likely to generate dust when handled. Although silica aerogel particles have been proven to be non-toxic to humans, dust formation remains a major barrier to the widespread application of silica aerogel blankets. This paper will investigate the unique properties of silica aerogel and determine what fields it can be used in or potentially be used in due to its unique properties. In addition, we will review the important advances in silica aerogel synthesis technology and its commercialization so far, and then consider the problems that exist for its widespread commercialization in the future and how to overcome them.

• Economic and Environmental Geology
• /
• v.55 no.4
• /
• pp.389-398
• /
• 2022

Many studies have been conducted to accurately predict the correlations between As and heavy metals content in contaminated soil and cultivated crops; however, due to the low correlation between the two, few clear results were obtained to date. This study aimed to create statistical models that predict the As content transferred from soil to polished rice, considering the physicochemical properties of the soil, as well as the total content and the single-extracted content of As in the soil. Predictive models were derived through regression analysis while sequentially classifying soil samples according to pH, soluble As content by single extraction, and organic matter content of the soil. The correlation coefficients between the As content in 80 polished rice and total As content and Mehlich soluble As content in the soil were low, 0.533 and 0.493, respectively. However, the models derived after sequential classification of the soil by pH, a ratio of total As content to Mehlich soluble As content, and organic matter content greatly increased the predictive power; ① 0.963 for 13 soils with a pH higher than 6.5, ② 0.849 for 15 soils with pH lower than 6.5 and a high ratio of As_Tot/As_Mehlich, ③ 0.935 for 30 soils with pH lower than 6.5, a high ratio of As_Tot/As_Mehlich, and organic matter content lower than 8.5%. The suggested prediction model of As transfer from soil to polished rice derived by soil classification may serve as a statistically significant methodology in establishing a rice cultivation standard for arsenic-contaminated soil.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.7
• /
• pp.217-226
• /
• 2020

Ajaeng is the bowed string instrument among zither instruments in East Asia, which has a circular form to date, and it has established itself as an important instrument in today's creative Gugak along with traditional music. Looking at previous prior studies, musical instrument studies have not been actively conducted due to insufficient data from musical history studies, and this study looked at the origin, form of musical instrument, and performance methods of zither bowed string instrument through historical records of Chinese Yazheng and music drawings. The analysis of various documents showed that Ajaeng originated from an ancient Chinese traditional musical instrument called Chuk. In terms of the performance style, the Chinese Yazheng had different musical forms depending on the purpose and location of the performance, and there was a method of standing up and fixing the musical instrument horizontally to the ground. Ajaeng in Korea has been handed down without much change in the form of musical instruments introduced in China during the Goryeo Dynasty and the way they sit on the floor and play on a pedestal. Through this study, we hope that it will help to preserve and develop traditional music and Korean traditional musical instruments by enhancing understanding of musical.

• Journal of Periodontal and Implant Science
• /
• v.52 no.4
• /
• pp.338-350
• /
• 2022

Purpose: Various studies have investigated 3-dimensional (3D)-printed implants using Ti6Al-4V powder; however, multi-root 3D-printed implants have not been fully investigated. The purpose of this study was to explore the stability of multirooted 3D-printed implants with lattice and solid structures. The secondary outcomes were comparisons between the 2 types of 3D-printed implants in micro-computed tomographic and histological analyses. Methods: Lattice- and solid-type 3D-printed implants for the left and right mandibular third premolars in beagle dogs were fabricated. Four implants in each group were placed immediately following tooth extraction. Implant stability measurement and periapical X-rays were performed every 2 weeks for 12 weeks. Peri-implant bone volume/tissue volume (BV/TV) and bone mineral density (BMD) were measured by micro-computed tomography. Bone-to-implant contact (BIC) and bone area fraction occupancy (BAFO) were measured in histomorphometric analyses. Results: All 4 lattice-type 3D-printed implants survived. Three solid-type 3D-printed implants were removed before the planned sacrifice date due to implant mobility. A slight, gradual increase in implant stability values from implant surgery to 4 weeks after surgery was observed in the lattice-type 3D-printed implants. The marginal bone change of the surviving solid-type 3D-printed implant was approximately 5 mm, whereas the value was approximately 2 mm in the lattice-type 3D-printed implants. BV/TV and BMD in the lattice type 3D-printed implants were similar to those in the surviving solid-type implant. However, BIC and BAFO were lower in the surviving solid-type 3D-printed implant than in the lattice-type 3D-printed implants. Conclusions: Within the limits of this preclinical study, 3D-printed implants of double-rooted teeth showed high primary stability. However, 3D-printed implants with interlocking structures such as lattices might provide high secondary stability and successful osseointegration.

• Iberoamérica
• /
• v.21 no.1
• /
• pp.57-105
• /
• 2019

This paper deals with the regional asymmetries of MERCOSUR and regional development cooperation for its solution. Through the formation of a common market, the countries of Southern Cone expected to grow evenly. However MERCOSUR had structural asymmetry from the beginning and exposed policy asymmetry over time. It is basically due to the overwhelming influences of Brazil on MERCOSUR. With regard to asymmetries, Paraguay calls for special and differential treatment. Uruguay wants equitable application of market liberalization. Argentine emphasizes production integration based on the development of value chains. In the issue of asymmetries, while Paraguay, Uruguay and Argentine act as petitioners, Brazil is capable of selecting the initiatives. Under these circumstances MERCOSUR has established FOCEM as regional redistribution mechanism. FOCEM has achieved some results as seen in Paraguay, but there are still problems such as financial limitations and lack of enforcement. In oder to activate the redistributive mechanism for regional integration and to coordinate the policies to resolve regional disparities, transnational governance is essential but all member countries are reluctant to it. To date, regional asymmetries or development gaps have persisted and disparities in individual countries remains a problem.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.3
• /
• pp.12-20
• /
• 2023

This study presents basic data on how to secure stability by analyzing the change in tensile force of steel rod and the inclination characteristics of PSC BOX in the "Temporary fixation system using internal prestressing tendon", which is mainly applied to construction of superstructures by FCM. To date, it has been difficult to confirm the changes in tension force of the steel rod and the inclination of the PSC BOX because the steel rod was installed vertically inside the pier and the PSC BOX. Therefore, measurement of the change in length of the steel rod and the displacement of PSC BOX were performed using a micro-measured FBG sensor. Comparisons of the calculated tensile force and the residual tensile force of the steel rod revealed that the safety factor decreased in all bridges. The cause was mainly identified to be the loss of tensile force in fixation~1segment, and countermeasures are suggested. The analysis of the inclination characteristics showed that the inclination increased with the segment progresses even in bridges with sufficient safety factor, and the difference before and after the segment was confirmed. In addition, the increase in inclination was related to the loss of tension force in the steel rod, and the stress on the opposite sides of the inclination was further reduced. It is believed that upward tensile force is generated in the steel rod on the opposite side of the inclined side due to the unbalanced moment, causing the difference in stress of the steel rod between the two sides.

• International Journal of Oral Biology
• /
• v.48 no.2
• /
• pp.9-18
• /
• 2023

The rapid detection of bacteria in the oral cavity, its species identification, and bacterial count determination are important to diagnose oral diseases caused by pathogenic bacteria. The existing clinical microbial diagnosis methods are time-consuming as they involve observing patients' samples under a microscope or culturing and confirming bacteria using polymerase chain reaction (PCR) kits, making the process complex. Therefore, it is required to analyze the development status of substances and systems that can rapidly detect and analyze pathogenic microorganisms in the oral cavity. With research advancements, a close relationship between oral and systemic diseases has been identified, making it crucial to identify the changes in the oral cavity bacterial composition. Additionally, an early and accurate diagnosis is essential for better prognosis in periodontal disease. However, most periodontal disease-causing pathogens are anaerobic bacteria, which are difficult to identify using conventional bacterial culture methods. Further, the existing PCR method takes a long time to detect and involves complicated stages. Therefore, to address these challenges, the concept of point-of-care (PoC) has emerged, leading to the study and implementation of various chair-side test methods. This study aims to investigate the different PoC diagnostic methods introduced thus far for identifying pathogenic microorganisms in the oral cavity. These are classified into three categories: 1) microbiological tests, 2) microchemical tests, and 3) genetic tests. The microbiological tests are used to determine the presence or absence of representative causative bacteria of periodontal diseases, such as A. actinomycetemcomitans, P. gingivalis, P. intermedia, and T. denticola. However, the quantitative analysis remains impossible, and detecting pathogens other than the specific ones is challenging. The microchemical tests determine the activity of inflammation or disease by measuring the levels of biomarkers present in the oral cavity. Although this diagnostic method is based on increase in the specific biomarkers proportional to inflammation or disease progression in the oral cavity, its commercialization is limited due to low sensitivity and specificity. The genetic tests are based on the concept that differences in disease vulnerability and treatment response are caused by the patient's DNA predisposition. Specifically, the IL-1 gene is used in such tests. PoC diagnostic methods developed to date serve as supplementary diagnostic methods and tools for patient education, in addition to existing diagnostic methods, although they have limitations in diagnosing oral diseases alone. Research on various PoC test methods that can analyze and manage the oral cavity bacterial composition is expected to become more active, aligning with the shift from treatment-oriented to prevention-oriented approaches in healthcare.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.33 no.2
• /
• pp.230-246
• /
• 2023

Objectives: The climate crisis has arrived and heat-related illnesses are increasing. It is necessary to discover new high-heat risk industries and understand the environment . It is also necessary to prioritize risks of industries that have not been included in the management target to date. The study was intended to monitor and evaluate the thermal risk of high-priority workplaces. Methods: A prioritization method was developed based on five factors: occurrence of and death due to heat-related illnesses, work environment monitoring, indoor work rate, small heat source, and limited heat dissipation. it, was applied to industrial accidents caused by heat-related illnesses. Wet bulb temperature index and apparent temperature were measured in July and August at 24 workplaces in seven industries and assessed for thermal risk. Results: The wet bulb temperature index was in the range of 23.8~31.9℃, and exposure limits were exceeded in the growing of crops, food services activities and accommodation, and building construction. The apparent temperature was in the range of 26.8~36.7℃, and exceeded the temperature standard for issuing heatwave warnings in growing of crops, food services activities and accommodation, warehousing, welding, and building construction. Both temperature index in growing of crops and building construction were higher than the outside air temperature. Conclusions: In the workplace, risks in industries that have not be controlled and recognized through existing systems was identified. it is necessary to provide break times according to the work-rest time ratio required during dangerous time period.