• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.9
• /
• pp.3517-3523
• /
• 2010

Single exposure dual X-ray imaging can be used to separate soft and dense-material images for medical and industrial applications. This study keep focusing baggage inspection system(BIS) specifically. New detector modules for single exposure dual X-ray imaging are consisted of low energy detector (LED) and high energy detector (HED). First, the optimized thickness of copper filter coupled HED to separate low energy and high energy was simulated by the given X-ray energy (140 kVp, 1 mA) using Monte Carlo simulation codes, MCNPX. So as a result of simulation, the copper filter thickness is 0.7 mm. For the design of PIN photodiode, ATLAS device simulation tool was used. 16 channels PIN photodiode of 1.5 mm ${\times}$ 3.2 mm for Dual X-ray imaging detector was fabricated in the process of ETRI. And its dark current and quantum efficiency, terminal capacitance were measured. It was proven that the Lanex Fast B coupled HED were a sufficient candidate to replace the CsI(Tl) commerced in dual X-ray system, since these give a strong signal, overcoming system noise. Finally dual X-ray image was acquired through correction of the LED X-ray Image and the HED X-ray Image.

• Wind and Structures
• /
• v.31 no.6
• /
• pp.575-591
• /
• 2020

Wind load is typically considered as one of the governing design loads acting on a structure. Understanding its nature is essential in evaluation of its action on the structure. Many codes and standards are founded on state of the art knowledge and include step by step procedures to calculate wind loads for various types of structures. One of the most accepted means for calculating wind load is using Gust Load Factor or base bending Moment Gust Load Factor (MGLF), where codes are adjusted based on local data available. Although local data may differ, the general procedure is the same. In this paper, ASCE 7-16 (2017), which is used as the main reference in the U.S., and Korean Building Code (KBC 2016) are compared in evaluation of wind loads. The primary purpose of this paper is to provide insight on each code from a structural engineering perspective. Herein, discussion focuses on where the two codes are compatible and differ. In evaluating the action of wind loads on a building, knowledge of the dynamic properties of the structure is critical. For this study, the design of four figurative high-rise buildings with dual systems was analyzed.

• Bulletin of the Korean Mathematical Society
• /
• v.52 no.3
• /
• pp.809-823
• /
• 2015

This paper is devoted to presenting a MacWilliams type identity for m-spotty RT weight enumerators of byte error control codes over finite commutative Frobenius rings, which can be used to determine the error-detecting and error-correcting capabilities of a code. This provides the relation between the m-spotty RT weight enumerator of the code and that of the dual code. We conclude the paper by giving three illustrations of the results.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2005.04a
• /
• pp.71-78
• /
• 2005

In performance-based design methods, it is clear that the evaluation of the nonlinear response is required. The methods available to the design engineer today are nonlinear tim history analyses, or monotonic static nonlinear analyses, or equivalent static analyses with simulated inelastic influences. The nonlinear time analysis is the most accurate method in computing the nonlinear response of structures, but it is time-consuming and necessitate more efforts. Some codes proposed the capacity spectrum method based on the nonlinear static analysis to determine earthquake-induced demand given the structure pushover curve. This procedure is conceptually simple but iterative and time consuming with some errors. The nonlinear direct spectrum method is proposed and studied to evaluate nonlinear response of structures, without iterative computations, given by the structural linear vibration period and yield strength from the pushover analysis. The purpose of this paper is to compare the accuracy and the reliability of approximate nonlinear methods with respect to RC dual system and various earthquakes.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.2
• /
• pp.1-5
• /
• 2008

Although we can make a sparse matrices for LDPC codes, the encoding complexity per a block increases quadratically by $n^2$. We propose modified PEG algorithm using PEG algorithm having a large girth by establishing edges or connections between symbol and check nodes in an edge-by-edge manner. M-PEG construct parity check matrices. So we propose parity check matrices H form a dual-diagonal matrices that can construct a more efficient decoder using a M-PEG(modified Progressive Edge Growth).

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.13 no.1
• /
• pp.8-14
• /
• 2013

A low density parity check (LDPC) decoder provides a most powerful error control capability for mobile communication devices and storage systems, due to its performance being close to Shannon's limit. In this paper, we introduce an efficient overlapped LDPC decoding algorithm using a upper dual-diagonal parity check matrix structure. By means of this algorithm, the LDPC decoder can concurrently execute parts of the check node update and variable node update in the sum-product algorithm. In this way, we can reduce the number of clock cycles per iteration as well as reduce the total latency. The proposed decoding structure offers a very simple control and is very flexible in terms of the variable bit length and variable code rate. The experiment results show that the proposed decoder can complete the decoding of codewords within 70% of the number of clock cycles required for a conventional non-overlapped decoder. The proposed design also reduces the power consumption by 33% when compared to the non-overlapped design.

• Journal of Microbiology and Biotechnology
• /
• v.33 no.12
• /
• pp.1692-1697
• /
• 2023

Staphylococcus aureus integrated with mecA gene, which codes for penicillin-binding protein 2a, is resistant to all penicillins and other beta-lactam antibiotics, resulting in poor treatment expectations in skin and soft tissue infections. The development of a simple, sensitive and portable biosensor for mecA gene analysis in S. aureus is urgently needed. Herein, we propose a dual-toehold-probe (sensing probe)-mediated exonuclease-III (Exo-III)-assisted signal recycling for portable detection of the mecA gene in S. aureus. When the target mecA gene is present, it hybridizes with the sensing probe, initiating Exo III-assisted dual signal recycles, which in turn release numerous "3" sequences. The released "3" sequences initiate catalytic hairpin amplification, resulting in the fixation of a sucrase-labeled H2 probe on the surface of magnetic beads (MBs). After magnet-based enrichment of an MB-H1-H2-sucrase complex and removal of a liquid supernatant containing free sucrase, the complex is then used to catalyze sucrose to glucose, which can be quantitatively detected by a personal glucose meter. With a limit of detection of 4.36 fM for mecA gene, the developed strategy exhibits high sensitivity. In addition, good selectivity and anti-interference capability were also attained with this method, making it promising for antibiotic tolerance analysis at the point-of-care.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1005-1009
• /
• 2009

An invisible code is one of the useful technologies for a computer interaction. In this paper, we propose a method to display invisible codes using LCD panels and to detect a polarized symbol image with a conventional CCD camera.

• Perspectives in Nursing Science
• /
• v.12 no.2
• /
• pp.124-127
• /
• 2015

Purpose: This article discusses nurses' moral dilemma and self-cultivation from the Foucauldian viewpoint. Methods: The philosophical inquiry approach is utilized to analyze the nurses' moral distress. Analyses are based on Foucauldian perspectives. Results: Foucault's codes of conduct comprising the mode of subjection and telos are discussed to explain nurses' moral dilemma. The dual process of caring is also discussed. Conclusion: From dilemmatic experience, nurses practice self-formation or self-cultivation to become more virtuous, well-balanced, or integrated people. Such characteristics form the essence of nursing practice.

• IE interfaces
• /
• v.8 no.3
• /
• pp.11-23
• /
• 1995

During the past few years, the productivity has been considered as one of the most important aims in developing softwares. Many practitioners and theorists are trying reuse ready made codes to increase the productivity of software development and the quality of their products. This paper introduces our experiences in developing a highly reusable class library and its reusing environment for building a database interface application. And the concepts, Structured Multi-Library and Dual Views of Class Inheritance, are also suggested, which consist our main conceptual framework in our work. Details in implementation are discussed in brief at the end.