• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.9
• /
• pp.1573-1579
• /
• 2004

This study was conducted to develop intermediate material for new processed food from sweet pumpkin. Osmotic dehydration was carried out as pretreatment before drying. After the sweet pumpkins were pretreated under optimized osmotic dehydration conditions, they were dried by three drying methods (hot air drying, vacuum drying and cold air drying). The moisture contents of dried sweet pumpkin products by osmosis treatment (sucrose) and hot air drying, vacuum drying, and cold air drying were 14.48, 14.09 and 13.87%, respectively. Cold air drying preserved more vitamin C content and showed lower color difference than hot air drying and vacuum drying. As a result of microscopic analysis, cold air dried sweet pumpkin was observed regular tissue, while hot air and vacuum dried sweet pumpkins were observed a cell collapse following the loss of water.

• Korean Journal of Food Science and Technology
• /
• v.29 no.2
• /
• pp.292-301
• /
• 1997

In drying process, to minimize the quality degradation by improved drying process and pretreatment methods, carrots, cabbages and radishes were dried and rehydrated. Physico-chemical properties of product were analyzed to determine the optimum pretreatment method and drying models were applied to explain drying mechanisms. Microwave, steam and water were used prior to drying as blanching method. In consideration of physical properties, optimum treatment time was decided that microwave was 1 min, steam and water were each 10 min. Control, steam, water, microwave and osmotic dehydration were treated prior to drying as pretreatment individually, osmotic dehydration was lower than the other treatmemt in drying efficiency, but carotene content was higher than the others. The effect continued after rehydration. Ten panelists tested dried and rehydrated carrots. After rehydration, the quality of air dried product with osmotic dehydration was superior to freeze dried without treatment. The fittness of drying models were conducted in order to explain the mechanism of drying each process. Quadratic model was most fittable to explain during drying. However, in rehydration process, no fittable model was found.

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.2
• /
• pp.61-70
• /
• 2012

In this study the effect of heartwood-coating (HCO), vapor-dam (VD), bark-remaing (BR) and bark-remaining- coating (BRC) treatments were evaluated during air circulating oven-drying of hollowed round-post of Korean red pine. Hollowed round-post could be dried from the green condition to approximately 6% MC within 84 to 156 hours for the UC, HCO and VD specimens and it took 72 to 240 hours to about 8% MC, which is recommended as the indoor in-use MC. The temperatures in the hole of the Control (UC) and HCO specimens constantly showed a higher-leveled distribution pattern than those inside wood. The vapor pressure in the hole of the UC, HCO and BR specimens was higher than that inside wood and showed difference as highest value of about 20 mbar. The surface checks of all specimens were mild and were observed in increasing order of BRC, BR, UC, VD and HCO specimens.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.3
• /
• pp.362-369
• /
• 1996

Seven different drying methods were tested in peony roots of Euisung cultivar, harvested in February, in three year's old plant. The roots were selected in length and diameter and half of the samples were removed cork-layers to compare the effects of cork-layer in processing of drying. The 3$0^{\circ}C$ heat drying without cork-layer reduced in days to drying by five days compared to those of the with cork-layers at the same temperature. The 5$0^{\circ}C$ heat drying after cork-layers removed was the most effective in days to drying. In quality of skin color of the 5$0^{\circ}C$ heating was worse to compare with the lower drying temperature. In the drying at room temperature and the heat drying at lower temperature, the paeoniflorin content in drying after cork-layers removed were higher than that of the drying with cork-layers. However, in the boiling water treatment, the paeoniflorin contents in drying after cork-layers removed were lower than those of with cork-layers. In heat drying, paeoniflorin content showed a decreasing tendency to increase of drying temperature. Total sugars in the peony roots showed a decreasing tendency according to the drying temperature increasing, but starch concentration showed a increasing tendency at the same condition. Concentrations of crude protein, crude fiber and crude ash were showed no differences in various drying methods and the materials with or without cork-layers. Relationships between the paeoniflorin and total sugars, and the paeoniflorin and starch were different significantly by the materials of cork-layers removed or not. The 30~4$0^{\circ}C$ heat drying without cork-layers was the most advisable condition for drying in paeoniflorin concentration, days to drying and skin color after drying.

• Korean Journal of Materials Research
• /
• v.23 no.6
• /
• pp.339-343
• /
• 2013

Porous Ti-systems with unidirectionally aligned channels were synthesized by freeze-drying and a heat treatment process. $TiH_2$ powder and camphene were used as the source materials of Ti and sublimable vehicles, respectively. Camphene slurries with $TiH_2$ content of 10 and 15 vol% were prepared by milling at $50^{\circ}C$ with a small amount of oligomeric polyester dispersant. Freezing of the slurry was done in a Teflon cylinder attached to a copper bottom plate cooled at $-25^{\circ}C$ while unidirectionally controlling the growth direction of the camphene. Pores were generated subsequently by sublimation of the camphene during drying in air for 48 h. The green body was heat-treated at $1100^{\circ}C$ for 1 h in a nitrogen and air atmosphere. XRD analysis revealed that the samples composed of TiN and $TiO_2$ phase were dependent on the heat-treatment atmosphere. The sintered samples showed large pores of about 120 mm which were aligned parallel to the camphene growth direction. The internal wall of the large pores had relatively small pores with a dendritic structure due to the growth of camphene dendrite depending on the degree of nucleation and powder rearrangement in the slurry. These results suggest that a porous body with an appropriate microstructure can be successfully fabricated by freeze-drying and a controlled sintering process of a camphene/$TiH_2$ slurry.

• Korean Journal of Veterinary Research
• /
• v.47 no.1
• /
• pp.117-125
• /
• 2007

Bone graft had been investigated previously to restore bone defects in orthopedics. The purpose of this study was to investigate the efficacy on new bone formation in bone autografts by treatment of implants. Cortical bone autografts were transplanted to midshaft of diaphyseal fibulae of 9 rabbits which were divided in 3 groups according to the treatment method of implants. Cortical bone implants for graft were treated with 3 different methods; freezing, freeze-drying, defat-freezing. Autografts were achieved by cross-transplantation method to bilateral fibulae of the presented rabbits after implant treatment procedures. The grafted regions of fibulae of all groups had been radiographed biweekly for 16 weeks to observe new bone formation and union between donor and recipient bone in the grafted region. Bone alkaline phosphatase (BALP) in all groups was evaluated biweekly till the end of the experiment to determine osteoblast activities. Unions of the experimental grafted regions were observed at 83% (5 of 6 cases) of freezing, 17% (1 of 6 cases) of freeze-drying and 67% (4 of 6 cases) of defat-freezing autografts, respectively. BALP was increased over 100% after 2 weeks of graft procedures in all union cases (all cases in freezing group and in defat-freezing group, and 1 of 3 in freeze-drying group, respectively), then gradually decreased from 4 th week of graft to 16 th week. In non-union cases, there is no significant variation in BALP value until the end of experiment. It is speculated that defat-freezing method of treatments of implants is more safe to preserve the osteogenic ability in autograft than freeze-drying method.

• Journal of the Korean institute of surface engineering
• /
• v.56 no.5
• /
• pp.289-298
• /
• 2023

In this study, the effect of drying temperature on characteristics of the trivalent chromate film on electroplated zinc was investigated. An zinc-electroplated iron specimen with a thickness of 5 ㎛ was used for chromate treatment. Chromate treatment was conducted in a solution diluted 10 times from a mixture of Cr(NO₃)₃·9H₂0 360 g/L, Co(NO₃)₂·6H₂O 60 g/L, Na₂SO₄ 60 g/L, NH₄F·HF 25 g/L, and NaOH 20 g/L. The zinc electroplated specimen was treated using the chromate solution with pH 2.0 at 25 ℃ for 60 s. Subsequently, chromate-treated samples were dried in an electric furnace for 2h with temperature varied from 25 to 125 ℃. The corrosion rate increased with the increase in the drying temperature, and the surface morphology of the chromate-treated film was observed using FE-SEM. When the drying temperature changed, the color of the chromate film changed from green to yellow, and the thickness of the film changed from 362 to 241 nm, respectively. Additionally, corrosion resistance was evaluated via a salt spray test.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.2
• /
• pp.46-54
• /
• 1996

This study was carried out to investigate the vacuum drying characteristics of 50mm- and 75mm- thick tree disks of some domestic softwoods for substituting the conventional hardwoods as the materials for wood crafts. Though the elapsed drying times from green to in-use moisture content(MC) were largely shortened by vacuum drying, the tree disks treated by EWS couldn't be dried to in-use MC, and so sapwood stains also were occurred severely. We suggest EWS treatment is undesirable for the species with very high sapwood portion or vacuum drying with hot water circulation heating system. Heart checks were slight, but sapwood checks, which have never been trouble in drying process of tree disks, were severe. For the reasonable explanation it is suggested MC differences between sapwood and heartwood were large and most of tree disks had already no barks before drying test. Ginkgo was vacuum-dried with very slight drying defects such as heart checks, sapwood checks. V-cracks and sapwood stains. In Korean red pine and pitch pine V-cracks were severely occurred. And it was found the special feature that most of these defected tree disks contained several V-cracks within one tree disk. It can be considered as the causes that the region of sapwood was defected by the several checks at the early drying stage because of the steep MC gradient along the radial direction, and then at the later drying stage the drying stresses due to differential shrinkage were concentrated on these brittle spots.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.8 no.4
• /
• pp.61-68
• /
• 2009

This paper presents the numerical analysis of process of sludge drying to know the characteristics of design parameters and develop the new process plant. Finite volume method and $k-{\varepsilon}$ turbulence model were used to analogy the sludge drying furnace. It has been attempted to perform the disposal of sewage sludge such as simple reclaiming and dumping in sea and incineration. Currently, these methods are restricted by national or international government regulations. The drying process is adopted as an effective method for sewage sludge treatment. However sewage sludge makes it difficult to treat with a large volume at the real drying process plant because of its own complicated physical, chemical, and thermal properties. The final design value of moisture content with 10% of the dried sludge can be obtained through the simulated outputs in this study.

• The Research Journal of the Costume Culture
• /
• v.10 no.5
• /
• pp.578-589
• /
• 2002

The purpose of this research was to analyze the residual water retention and to determine the number and species of microorganisms from the wet cotton fabrics in dehydration and drying process during washing. The drying rates of terrycloth and interlock knit under the rainy seasons were measured according to the dehydration and hanging methods, layers of fabric and pre-treatment agents. Microorganisms were isolated from the dried terrycloth by pure culture, and were identified by Biolog system. The results are as follow: The initial water retention of fabrics after dehydration decreased in the order of dripping>centrifuge>squeezing method, which affected the drying rate. The drying rates were faster by increasing surface area of fabrics. There was no significant difference in drying rate among the fabrics pre-treated with detergent, or fabric softener, or cationic surfactants such as Cetyltrimethylammonium bromide(CTAB) and Benzalkonium chloride(BC). Puedomonas aureginosa was found in the fabrics treated with a powder-type detergent. On the other side, there was no growth of microorganism in the fabrics treated with a liquid-type detergent (containing antibacterial agent), CTAB and BC.