• Journal of Biosystems Engineering
• /
• 제3권1호
• /
• pp.64-76
• /
• 1978

A dimensional supply of petroleum fuels and increased competition for petroleum products has made the conservation of energy in grain drying an important cost and management factor. Research on solar grain drying is directed toward utilization of a renewable energy source as an alternative to petroleum fuels for drying. There are many technical and economic problems in accepting and adopting solor energy as a new energy source for grain drying. The purpose of this study are to assess the state of the art of solar grain drying and to find out the problems by reviewing literatures available. The results obtained may be summarized as follows; 1.It may be considered that the weather conditions in October of Korea was satisfactory for the forced natural air and solar heated air drying. 2. Solar energy is considered more applicable to low-temperature, In-storage drying systems than to high-temperature, high-speed drying systems. In-storage drying systems require low levels of heat input. The costs of collector systems to provide low temperature are considerably cheaper than for high-temperature systems. 3. Tubular type collector made of polyvinyle film seems to be the most practical at this stage of development and black-painted bare-plate collectors mounted on the outside of a typical, round, low-temperature drying bin can supply an appreciable amount of the energy efficiently needed for low-temperature grain drying at a lower cost. 4. All of the grains in solar drying tests was successfully dried up to safe storaged moisture levels without significant spoilage. Drying rates with solar system were faster than natural air drying systems, and usually a little slower than similar low-temperature electric drying systems. 5. Final grain moisture levels were lower in solar tests than in natural air tests, and generally higher than in tests with continuous heated air. 6. Savings of energy by use of solar collectors ranged from 23% to 55%, compared to the natural and electric ileated air drying systems. However, total drying cost effectiteness tvas not significant. Therefore, it is desirable that solar grain dry-ing sIFstems tvhich could be suitable for multiple heating purposes on farms shouldbe developed. 7. Supplemental heat with solar radiation did little to reduce air flow requirementsbut refuced drying time and increased the p\ulcornerobability of successful drying duringdrying poriod.

• 한국약용작물학회지
• /
• 제18권2호
• /
• pp.98-104
• /
• 2010

Eleuthero(Eleutherococcus senticosus Maxim.) cortex is well known as a herb medicine for tonic. This study was performed to improve the quality of dried E. senticosus cortex. Investigation of quality factor and contents of efficient compounds under different steaming times and drying methods were performed to determine the proper processing and drying conditions of Eleuthero cortex harvested on March in annual stems. The proper steaming time for peeling bark to make high quality Eleuthero cortex took less than 20 mins. Eleutheroside B and E contents among drying methods were significantly different at 5% level DMRT. The $50^{\circ}C$ heat drying was the most advisable condition for drying, when drying and keeping contents of effective compounds.

• 유기물자원화
• /
• 제24권4호
• /
• pp.105-112
• /
• 2016

우분을 원료로 하여 구 모양의 펠릿(Spherical pellet) 형태로 가공한 우분 고체연료에 대한 건조실험을 수행하였다. 제조한 구 형태의 우분 고체 연료를 선별기에 투입하여 각 크기별로 분리하였다. 건조방식으로는 대류형 열풍건조 방법과 적외선 조사 건조 방법. 그리고 과열증기 적용에 의한 건조방법을 적용하였다. 제조된 펠릿의 직경에 따라 5 mm, 10 mm, 20 mm 로 구분하여 각 입경별 우분 고체연료 가공품의 수분 감소효과를 분석하였다. 가공된 우분 펠릿의 건조에 소요된 시간은 대류형 열풍기 건조 > 적외선 건조 > 과열증기 건조 방법의 순이었다. 과열 증기 적용에 의한 건조방법의 경우 건조에 소요된 시간은 열풍과 적외선 방법에 비해 상대적으로 짧았다. 건조된 상태인 우분 펠릿의 겉보기 비중은 $250{\sim}350kg/m^3$ 수준이었으며, 건조된 우분 펠릿의 저위발열량은 가축분뇨의 관리 및 이용에 관한 법률 시행규칙 별표 2에서 정한 가축분뇨 고체연료의 성분 등에 관한 기준에 규정된 3,000 kcal/kg 보다 높은 수준이었다. 우분 펠릿의 입자크기가 작을수록 모든 건조방법에서 건조에 필요한 시간이 짧게 소요되었다. 5 mm 크기의 우분 펠릿을 건조하였을 때 시료의 무게 변화가 1% 내외가 될 때까지 소요된 시간은 과열증기 적용 시 약 30분, 적외선 조사 시 약 108분, 대류형 열풍 적용 시 약 120분이 소요되었다. 동일한 건조조건일 경우에는 펠릿 입자의 크기를 작게 하는 것이 가축 분 고체연료의 건조시간을 단축하는 중요한 요소인 것으로 판단된다.

• Journal of the Korean Wood Science and Technology
• /
• 제16권2호
• /
• pp.69-78
• /
• 1988

리기다소나무(Pinus rigida Mill)의 건조(乾燥)스케쥴 개량(改良)을 위해 두께 2.5cm 판재(板材)와 5.0cm 평소각재(平小角材)를 공시하여 각각 관행건조(慣行乾燥)스케쥴을 적용하여 최종함수율(最終含水率) 10% 정도까지 건조(乾燥)하고 함수율(含水率)과 건조저항(乾燥抵抗)의 관계를 측정한 결과는 다음과 같다. 1. 함수율(含水率)과 건조저항(乾燥抵抗)의 관계는 함수율(含水率)이 감소할수록 건조저항(乾燥抵抗)은 곡선적(曲線的)으로 증가하였으며, 건조중(乾燥中) 함수율(含水率)이 동일한 경우 건조저항(乾燥抵抗)은 평소각재(平小角材) 판재(板材)보다 컸다. 목재두께별 적용한 관행건조(慣行乾燥)스케쥴에 따른 함수율(含水率)과 건조저항(乾燥抵抗)의 관계는 다음과 같다. 1) 두께 2.5cm 판재(板材)의 관행건조(慣行乾燥)스케쥴에 따른 건조저항(乾燥抵抗) $R_{2.5}=6.795\times10^3M^{-1.27^{**}}$ 2) 두께 5.0cm 평소각재(平小角材)스케쥴에 따른 건조저항(乾燥抵抗) $R_{5.0}=5.206\times10^4M^{-1.55^{**}}$ 2. 건조시간(乾燥時間)에 따른 함수율(含水率)과 건조저항(乾燥抵抗)의 관계는 건조시간(乾燥時間)이 증가할수록 함수율(含水率)은 감소함과 동시에 건조저항(乾燥抵抗)은 증가하였으며, 평소각재(平小角材)가 판재(板材)보다 곡선변화(曲線變化)가 완만하였다. 3. 함수율(含水率) 10%까지의 관행건조(慣行乾燥)스케쥴에 따른 추정건조시간(推定乾燥時間)은 비교적 작은 오차(誤差)를 나타내며 관행건조시간(慣行乾燥時間)보다 작았다. 4. 목재두께별로 적용한 관행건조(慣行乾燥)을 유발하지 않으면서 최소의 시간에 원하는 최종함수율(最終含水率)에 도달하도록 개량(改良)할 필요가 있다. 5. 관행건조(慣行乾燥)스케쥴에 따른 kiln factor는 두께 2.5cm 판재(板材)의 경우 1.112이었으며, 두께 5.0cm 평소각재(平小角材)의 경우 1.136이었다.

• 한국식생활문화학회지
• /
• 제8권4호
• /
• pp.331-335
• /
• 1993

건시의 품질향상을 위하여 국내 유명산지의 건시를 시료로 하여 건시의 제조시험과 품질평가에 관한 기초자료로서 그 품질요소를 조사하였다. 건시의 수분함량은 30-36%였으며, 탄닌함량은 0-20%로 무처리구는 $CO_2$와 alcohol 처리구보다 그 함량이 높게 나타났다. 전당함량은 55-60%였고 그 구성은 glucose와 fructose로 구성되어 있었다. 열풍건조에 의한 건시의 제조는 천일건조보다 그 품질이 전반적으로 우수하였으며 특히 slice 한 제품의 품질은 전과의 경우보다 비교적 우수하였다.

• Fisheries and Aquatic Sciences
• /
• 제25권6호
• /
• pp.335-349
• /
• 2022

To optimize the hydrolysis conditions in the production of antioxidant hydrolysates from tuna cooking juice concentrate (TC) to maximize the 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity, TC containing 48.91% protein was hydrolyzed with Alcalase 2.4 L, and response surface methodology (RSM) was applied. The optimum hydrolysis conditions included a 2.2% (w/v) Alcalase concentration and 281 min hydrolysis time, resulting in the highest DPPH radical scavenging activity of 66.49% (0.98 µmol Trolox/mg protein). The analysis of variance for RSM showed that hydrolysis time was an important factor that significantly affected the process (p < 0.05). The effects of different drying methods (freeze drying, hot air drying, and vacuum drying) on the DPPH radical scavenging activity and amino acid (AA) profiles of TC hydrolysate (TCH) were evaluated. Vacuum-dried TCH (VD) exhibited an increase in DPPH radical scavenging activity of 81.28% (1.20 µmol Trolox/mg protein). The VD samples were further fractionated by ultrafiltration. The AA profiles and antioxidant activities in terms of the DPPH radical scavenging activity, 2,2'-azino-bis(3-ethylbenzthiazoline)-6-sulfonic acid (ABTS) radical scavenging activity, ferric reducing antioxidant power, and ferrous ion chelating activity were investigated. Glutamic acid, glycine, arginine, and cysteine were the major AAs found in the TCH fractions. The highest DPPH radical scavenging activity was found in the VD-1 fraction (< 5 kDa). The VD-3 fraction (> 10 kDa) exhibited the highest ABTS radical scavenging activity and ferric reducing antioxidant power. The ferrous ion chelating activity was the highest in VD-1 and VD-2 (5 to 10 kDa). In conclusion, this study provided the optimal conditions to obtain high antioxidant activities through TCH production, and these conditions could provide a basis for the future application of TCH as a functional food ingredient.

• 농약과학회지
• /
• 제16권4호
• /
• pp.302-307
• /
• 2012

친환경 유기농자재 rotenone의 홍고추 중 잔류특성을 조사하고 가공계수를 산출하기 위하여 시험포장에 시험농자재를 7일 간격으로 2회 살포한 후 경시적으로 채취하여 잔류량을 분석하였다. 홍고추와 건고추 중 rotenone의 정량한계는 각각 0.03과 0.07 mg/kg이었으며, 분석법의 회수율은 각각 89.52-97.86%와 85.76-91.61%이었다. 잔류농약 분석 결과 홍고추 중 시험농자재의 잔류량은 0.03-0.39 mg/kg이었으며, 건고추의 경우 0.07-0.75 mg/kg으로 잔류량은 경시적으로 감소하였다. 건조에 의한 홍고추 중 rotenone의 가공계수는 2.03-3.13으로써 건조에 따라 잔류농도가 2-3배 증가하였다. 그러나 건조 전 홍고추 중 rotenone의 감소계수는 0.38-0.59로서 건조 전 홍고추 중 rotenone의 일부는 건조 과정 중 소실된 것으로 나타났다.

• Journal of the Korean Wood Science and Technology
• /
• 제23권4호
• /
• pp.39-45
• /
• 1995

The plywoods commonly used as decorative interior materials for the construction are inflammable and so it is a causative factor for making fire accidents, resulting in the destruction of human life and personal properties. Indeed, it is, therefore, required to produce fire-retardant plywoods. In this study, a special grade of defect-free, Kapur plywood was used. Specimens were cut into 3- by 20cm dimensions from 120- by 240- by 0.33-cm panels(thin panel) or 120- by 240- by 0.5-cm panels(thick panel). Some specimens were treated with diammonium phosphate(DAP), but some were not treated with diammonium phosphate to use as control panels. Chemical absorption, drying curves, drying rates and dynamic Young's modulus were investigated. The results were summaries as follows; 1. The specimens were soaked into 19% diammonium phosphate solution by a full cell pressure process and the diammonium phosphate retained in the thin and thick plywoods was 1.409kg/$(30cm)^3$, 1.487kg/$(30cm)^3$, respectively. 2. Diammonium phosphate-treated plywoods were redried with press-drying process at one of either condition dried on the platen($115^{\circ}C$) for a period of time or dried on the platen($50^{\circ}C$) for 3 hrs plus in a dry-oven($30^{\circ}C$) for 24 hrs. or dried on the platen($60^{\circ}C$) for 2 hrs plus in a dry-oven($30^{\circ}C$) for 24 hrs. The drying rate of treated thin specimens dried at $60^{\circ}C$ plus $30^{\circ}C$ and $115^{\circ}C$ only was found to be 0.04 %/min. and 8.53 %/min. Similarly, the drying rate of treated thick specimens were 0.03 %/min. and 6.77 %/min. respectively. 3. It was evident that highly-significantly different drying rate of treated plywoods was observed between plywood thicknesses and platen temperatures and the rate was increased by elevating the platen temperature up to $115^{\circ}C$. Based on the two-way variance analysis, highly significant drying rate was observed from the interaction between plywood thicknesses and platen temperatures. 4. After redrying, the specimens were weighed and reconditioned to a constant weight in a facility maintained temperature ($20^{\circ}C$) and relative humidity(65%) prior to test dynamic Young's modulus. The test revealed that the thin specimens dried at the platen temperature of $50^{\circ}C$, $60^{\circ}C$, $115^{\circ}C$ and untreated specimens showed 1.070E+09 dyne/$cm^2$, 1.156E+09 dyne/$cm^2$, 1.243E+09 dyne/$cm^2$, and 1.052E+09 dyne/$cm^2$, respectively. Likewise, the thick specimens revealed 5.647E+09 dyne/$cm^2$ 5.670E+09 dyne/$cm^2$, 6.395E+09 dyne/$cm^2$ and 5.415E+09 dyne/$cm^2$, respectively. 5. It was evident that significantly different dynamic Young's modulus was observed between the plywood thickness and the platen temperature, but not in the two-way interaction between the plywood thickness${\times}$the platen temperature.

• 한국산학기술학회논문지
• /
• 제19권8호
• /
• pp.176-182
• /
• 2018

심미 치과보철물의 가장 중요한 요인 중의 하나는 치아의 색상이다. 지르코니아는 디자인, 밀링, 착색, 건조, 소결과정을 거치는데, 이때의 지르코니아 착색제의 건조 정도가 색조에 어떠한 영향을 미치는지 알아보고자 한다. 실험을 위해 캐드캠을 이용하여 지르코니아 블록별(L block(LAZOR), Z block(Zircos-E block posterior), A block(AlphaZ))로 각 15개씩 총 45개의 원형 시편을 제작하였다. 그다음 지르코니아 시편을 화학적 착색제를 이용하여 미건조(0sec), 중간건조(10sec), 완전건조(10min)의 온도유지시간(Temperature dwelling time)을 부여하여 오븐에서 건조한 후 제조회사 지시대로 지르코니아 시편을 소결하였다. 분광광도계를 이용하여 색조를 측정하였다. 치과용 지르코니아 시편의 건조유지시간에 따라 색조의 변화를 비교 분석하기 위해 One-way ANOVA를 시행하고, 사후검정으로 Tukey test를 실시하였다. 지르코니아 $L^*$값은 L, A 시편과 $a^*$값은 A 시편, $b^*$값은 Z 시편의 건조 정도에 따라 통계적으로 차이가 없으나 (p>0.05), $L^*$값은 Z 시편과 $a^*$값은 L, Z 시편, $b^*$값은 L, A 시편이 건조 정도에 따라 통계적으로 차이가 있었다(p<0.05). 결론적으로 착색제의 건조유지시간이 길수록 지르코니아 명도를 밝게 하고, 법랑질의 광학적 특성을 증가시킨다.

• 한국환경농학회지
• /
• 제37권3호
• /
• pp.213-220
• /
• 2018

BACKGROUND: This study was carried out to determine characteristics of residual pesticides in time-dependent manner and calculate half-lives of the residual pesticides in fresh and dried Chinese matrimony vine. In addition, processing factors were calculated based on the residual concentrations in them. METHODS AND RESULTS: The test pesticides, etofenprox and fenitrothion, were sprayed onto the Chinese matrimony vine plants at once or twice (at seven-day interval) and then samples were collected at 0 (after 3 hours), 1, 3, 5 and 7 days after the last spraying. Dried samples were prepared in hot-air drying oven at $60^{\circ}C$ for 48 hours until water content of less than 20%. Residual concentrations of etofenprox in fresh and dried samples decreased by 54.0-60.9% after 7 days of the last pesticide-application. In case of fenitrothion, the concentrations were found to have decreased by 69.2-76.5%. Processing factors of etofenprox were 2.6-3.0 for the one-time spraying and 2.5-3.0 for the two-time spraying and those of fenitrothion were found to be 1.5-22 for the one-time spraying and 1.6-2.0 for the two-time spraying. First half-lives of etofenprox and fenitrothion in fresh and dried samples ranged from 5.0 to 6.3 and from 3.4 to 4.0 days, respectively. The third half-lives were found to be 15.0-18.9 and 10.2-12.1 days, respectively. CONCLUSION: Residual concentrations of the tested pesticides in the studied crop decreased, but those in the dried samples appeared to have increased. In addition, processing factor and half life were constant regardless of spraying times.