• Journal of Microbiology and Biotechnology
• /
• 제28권1호
• /
• pp.105-108
• /
• 2018

Beef was dry aged for 40-60 days under controlled environmental conditions in a refrigerated room with a relative humidity of 75%-80% and air-flow. To date, there is little information on the microbial diversity and characteristics of dry aged beef. In this study, we explored the effect of change in meat microorganisms on dry aged beef. Initially, the total bacteria and LAB were significantly increased for 50 days during all dry aging periods. There was an absence of representative foodborne pathogens as well as coliforms. Interestingly, fungi including yeast and mold that possess specific features were observed during the dry aging period. The 5.8S rRNA sequencing results showed that potentially harmful yeasts/molds (Candida sp., Cladosporium sp., Rhodotorula sp.) were present at the initial point of dry aging and they disappeared with increasing dry aging time. Interestingly, Penicillium camemberti and Debaryomyces hansenii used for cheese manufacturing were observed with an increase in the dry aging period. Taken together, our results showed that the change in microorganisms exerts an influence on the quality and safety of dry aged beef, and our study identified that fungi may play an important role in the palatability and flavor development of dry aged beef.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.429-429
• /
• 2012

To investigate the gettering effect of B-doped n-type monocrystalline silicon wafer, we made the p-n junction by diffusing boron into n-type monocrystalline Si substrate and then oxidized the boron doped n-type monocrystalline silicon wafer by in-situ wet and dry oxidation. After oxidation, the minority carrier lifetime was measured by using microwave photoconductance and the sheet resistance by 4-point probe, respectively. The junction depth was analyzed by Secondary Ion Mass Spectrometry (SIMS). Boron diffusion reduced the metal impurities in the bulk of silicon wafer and increased the minority carrier lifetime. In the case of wet oxidation, the sheet resistance value of ${\sim}46{\Omega}/{\Box}$ was obtained at $900^{\circ}C$, depostion time 50 min, and drive-in time 10 min. Uniformity was ~7% at $925^{\circ}C$, deposition time 30 min, and drive-in time 10 min. Finally, the minority carrier lifetime was shown to be increased from $3.3{\mu}s$ for bare wafer to $21.6{\mu}s$ for $900^{\circ}C$, deposition 40 min, and drive-in 10 min condition. In the case of dry oxidation, for the condition of 50 min deposition, 10 min drive-in, and O2 flow of 2000 SCCM, the minority carrier lifetime of 16.3us, the sheet resistance of ${\sim}48{\Omega}/{\Box}$, and uniformity of 2% were measured.

• Corrosion Science and Technology
• /
• 제2권4호
• /
• pp.183-188
• /
• 2003

Corrosion of carbon and weathering steels were evaluated under 3 environmental exposures in Thailand (urban, rural and marine) for a year. The seasonal study was designed to determine different corrosion mechanisms by 6 months of dry season and 6 months of rainy season in a year. The sheltered exposure racks were used to determine the washing effect of min. At each site, climatic and pollutants analyses were carried out. The present study showed that the difference in corrosion rates of carbon and weathering steels was not so distinguished in both rural (AIT) and urban (TISTR) environments. The corrosion rate of weathering steel was somewhat lower than that of carbon steel and the decreasing tendency of corrosion rate with time was slightly higher for weathering steel than for carbon steel. In marine (Rayong) environment, the corrosion rate was higher and the effect of wet and dry seasons was observed. The corrosion rate in 6 dry months was higher for direct exposure than for sheltered exposure. However, in 6 rainy months. the corrosion rate of sheltered exposure was higher than that of direct exposure. In direct exposure for I year, that is, the first 6 dry months and the next 6 rainy months, the corrosion rate decreased with time. but in sheltered exposure, the corrosion rate did not decrease with time. instead, increased in the next 6 rainy months. This indicated that the protect ive layer formed in the first 6 dry months could be destroyed by high deposition of chloride to r sheltered exposure in the next 6 rainy months; whereas the rust layer for direct exposure could be kept sound due to washing effect in rainy season, even though the deposition rate of chloride was almost the same for direct and sheltered exposures. In marine environment, the weathering steel showed higher corrosion resistance than carbon steel but its corrosion rate was higher than those in other environments.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제1권2호
• /
• pp.57-63
• /
• 2009

Numerical simulations have been carried out on the flooding system of a dry located at the south coasts of Iran. The main goals of seawater flow haracteristics in the intake channels conditions of the flooding system are imposed in the modeling. The upstream boundary condition is the tidal fluctuations of sea water level. At the downstream, the gradually rising water surface elevation in the dry described in a transient boundary condition. The numerical results are compared with available laboratory a good agreement is obtained. The seawater discharge through the flooding system and the required time to filling up the dry dock is determined at the worst case. The water current velocity and pressure on the rigid boundaries are discussed.

• Restorative Dentistry and Endodontics
• /
• 제20권1호
• /
• pp.97-112
• /
• 1995

The purpose of this study was to evaluate the effect of wetting condition made by drying time on bonding of resin cement to dentin. Freshly extracted bovine teeth were grinded to expose flat dentin surfaces. After the exposed dentin surfaces were treated with pretreatment agents and water rinse, each wetting condition of dentin surfaces was made according to drying times and methods including slight blow bry for I-second by air syringe, blow dry for 20-second by air syringe, and 12-hour dry in desiccator respectively. and then, previously made composite resin specimens were bonded onto each conditioned dentin surface of the specimen using Panavia-21(Kuraray Co.), Bistite(Tokuso Co.), and Choice(use with All bond-2, Bisco Inc.) resin cement according as manufacturer's instruction. Bonded specimens were stored in $37^{\circ}C$ distilled water for 24 hours, then the tensile bond strength was measured, cohesive failure rate was calculated, and fractured dentin surfaces and acrylic rod sides were examined under scanning electron microscope. The result were as follows ; In the group of bonding with Panavia-21 resin cement, higher tensile bond strength was seen in 12-hour dry group than in I-second and 20-second dry group(p<0.01). In the group of bonding with Bistite resin cement, higher tensile bond strength was seen in 1-second dry group than in 20-second and 12-hour dry group(p<0.01). In the group of bonding with Choice resin cement, no significant differences of bond strength under given drying time were seen. Cohesive failure rates derived from the groups of bonding with Panavia-21 and Choice resin cement were increased with the increase of tensile bond strength in each drying time. On SEM examination of fractured surface, adhesive failure mode with fractured resin tags was mostly seen in wet condition with I-second drying time in the group of bonding with Panavia-21 resin cement, mixed failure mode with shortened and fractured resin tag was seen in the group of bonding with Bistite resin cement, and regardless of drying time, and cohesive-adhesive mixed failure mode with fracture of 'Hollow' typed resin tags was mainly seen in the group of bonding with Choice resin cement.

• 수산경영론집
• /
• 제41권2호
• /
• pp.25-44
• /
• 2010

The laver has been cultivated long time ago in Korea. And traditional production system was changed to new system about 30 years ago. The new production system is understood the specialization of laver products, that is, originally individual fishery households made final laver products from raw cultured laver in sea working to dry working in land, but the new system was separated raw laver production in sea and dry laver production, which made final dry laver products by purchase the raw laver in land. This change has been increased laver production, 10 billion sheets in 2000's from 5 billion sheets in 1980's. And rapid production increase gave rise to some troubles on laver industry that is a serious drop in real laver prices, discord structure between raw laver producer and dry laver producer, stagnation of laver consumption, etc. Now Korea is the best laver production country together with Japan in world. Then we have to consider some schemes for the sustainable development of laver industry. One of such schemes is export enlargement of laver against world. The consumption of laver has been globally increased in recent. The other is the grading test problem of dry laver. Because the rapid increase of laver production caused to drop laver quality. Then we seriously have to consider the grading test of dry laver for high level quality production.

• 대한약침학회지
• /
• 제14권2호
• /
• pp.25-35
• /
• 2011

Objective : This research was done to identify the effects of dry cupping therapy on the shoulder pain and fatigue of nurses. Methods : The research design was time series design. The participants were 27 nurses with shoulder pain at P University Hospital in Busan metropolitan city from July 6, 2009 to August 3, 2009. The dry cupping therapy was done 4 times, twice a week for 2 weeks. Before intervention, the severity and frequency of pain and fatigue were measured three times at one week intervals, and then those were measured after one week and two weeks of experimental treatment. The results were analyzed using descriptive statistics, paired t-test and repeated measure ANOVA with the SPSS program. Results : There were statistically significant difference in severity and frequency of shoulder pain, and fatigue after dry cupping therapy. Dry cupping therapy was effective for the management of shoulder pain and fatigue among nurses in this study. Conclusion : Therefore dry cupping therapy can be considered an effective nursing intervention that relieves shoulder pain and fatigue of nurses.

• 방사성폐기물학회지
• /
• 제19권2호
• /
• pp.205-214
• /
• 2021

Currently, the interim storage pools of spent fuels in South Korea are expected to become saturated from 2024. It is required to prepare an operation plan of a domestic dry storage facility during a long-term period, with the researches on safety evaluation methods. This study modified the FRAPCON code to predict the spent fuel integrity evaluation such as the axial cladding temperature, the hoop stress and hydrogen distribution in dry storage. The cladding temperature in dry storage was calculated using the COBRA-SFS code with the burnup information which was calculated using the FRAPCON code. The hoop stress was calculated using the ideal gas equation with spent fuel information such as rod internal pressure. Numerical analysis method was used to calculate the degree of hydrogen diffusion according to the hydrogen concentration and temperature distribution during a dry storage period. Before 50 years of dry storage, the cladding temperature and hoop stress decreased rapidly. However, after 50 years, they decreased gradually and the cladding temperature was below 400 K. The initial temperature distribution and hydrogen concentration showed a parabolic line, but hydrogen was transferred by the hydrogen concentration and temperature gradient over time.

• 한국초지조사료학회지
• /
• 제22권4호
• /
• pp.287-296
• /
• 2002

본 시험은 제주지역에서 양마의 적응성과 생산량 및 사료가치를 구명하기 위해서 양마 Evergrlades 41, China Chong-pi 3 및 수수$\times$수단 교잡종 Pioneer 947를 이용하여 2000년 5월부터 11월까지 제주의 4개 지역( 제주시, 서귀포시, 성산 수산 및 한림 금악)에서 수행되었다. 건물수량은 수수$\times$수단 교잡종 (pioneer 947), 양마 (Everglades 41) 및 (China Chong-pi 3)을 비교시 각각 7,313, 4,653 및 5,238 kg/ha로서 Chong-pi 3이 가장 높은 수량을 보였고(P<0.05) 지역별(제주, 서귀, 성산 및 한림)로 각 각 5,040, 5,663, 7,283 및 4,950 kg/ha서 성산지역이 가장 높은 수량을 보였다(P<0.05). 양마 두 품종 모두에서 1회 수확이 2회 수확 보다 높은 건물수량을 보였다. NDF 및 ADF 함량은 두 양마 품종간 또는 수수X수단 교잡종과 양마간 뚜렷한 차이가 없었고 조단백질 함량은 수수$\times$수단 교잡종 Pioneer 947, 양마 Everglades 41 및 China Chong-pi 3에서 각각 12.60, 16.1 및 16.20%를 보여 수수$\times$수단 교잡종 보다 양마에서 높은 조단백질 함량을 보였으며(p<0.05) 지역 간에 차이가 분명치 않았다. 그러나 1회 예취(13.72%) 보다 2회 예취 시(17.75%) 양마의 조단백질 함량이 유의적으로 증가하였고(P<0.05) 한편 NDF(50.61, 42.57%)와 ADF(50.66, 41.61) 함량은 1회 보다 2회에서 유의적 감소를 보였다. (P<0.05). 수확이 끝난 후 수수$\times$수단 교잡종(Pioneer 947)과 양마 2 품종(Everglades 41, China-chong-pi 3)을 재배했던 4개 지역 토양에 대한 중금속 함량을 조사한 결과 처리간 뚜렷한 차이를 발견치 못했다. 결론적으로 양마는 수수$\times$수단 교잡종 보다 건물수량이 높지 못하였으나 조단백질 함량이 수수$\times$수단 교잡종 보다 높았고 그 중 1회 보다 2회 예취를 하므로 더 높은 조단백질 함량 을 보였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.664-669
• /
• 2002

Intertidal zone (tidal flat) is a place which is sometimes dry and sometimes wet depending on the tidal rhythm. Direct measurement of topography in the intertidal zone is very difficult to be achieved. The interface between wet and dry parts in the tidal flat, which can be identified from near infrared band of satellite image, is a 'depth contour' which corresponds to the sea level at the time of satellite pass. Aquisition of topography data in tidal flat is possible by combining various techniques such as (1) identification of the interface between wet and dry parts, (2) GCP correction of satellite image, and (3) realtime prediction of sea level elevation at the time of satellite pass. The algorithm was successfully applied in obtaining topography (bathymetry) data in the intertidal zone of Asan Bay in the west coast of Korea from 26 satellite images. The method is expected to be very efficient in making bathymetry data base in the western and southern parts of Korea where tidal flats are well developed in wide regions.