• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47 no.4
• /
• pp.286-291
• /
• 2002

Seedling establishment of soybean [Glycine max (L.) Merr.] is a critical factor in production system and cultural practices. The objective of this study was to identify the components of soybean seedling developments encompassing planting dates and cultivars that respond to emergence, early growth stage and dry matter accumulation. Three soybean cultivars, Hwangkeumkong, Shinpaldalkong 2, and Pungsannamulkong, were planted at Baegsan silty loam soil. Planting date was May 13, June 3, and June 24 in 2001. Sprinkler irrigation was accompanied with 30mm after seeding for three planting dates. Soybean seedlings were sampled at the growth stages from VE to V5. Days to emergence of soybean seedlings were taken 8 at May 13 and 5 at June 24 plantings. Emergence percentage was over 90 at three planting dates. May 13 planting took 33 days and June 24 planting was 25 days for reaching V5 growth stage. Cotyledon number was decreased after V2. Significant cultivar difference was found in cotyledon dry weight until V2 which differed in seed dry weights at the planting times. Leaf and total dry weights of soybean seedlings were not differed from V1 to V3 among planting dates and cultivars. Leaf water contents were generally ranged 78 to 85%. Branch was appeared from V4. Leaf/stem ratio among cultivars was similar at five growth stages and gradually increased from 2.1 at V1 to 2.8 at V5. The results based on this experiment indicated that seedling establishment of soybean was continued from VE to V3 growth stages affecting mainly by planting date and soil moisture.

• Journal of Biosystems Engineering
• /
• v.28 no.4
• /
• pp.361-368
• /
• 2003

This study was intended to investigate the temporal and spatial variabilities of dry matter, nitrogen content, chlorophyll of paddy rice and yield caused by different rates of nitrogen application. An experimental field was divided into 45 plots of 3.48 ${\times}$ 12 m in size and application rate of nitrogen varied from 0 to 235% with an increment of 25% based on the standard rate of N-P$_2$O$_{5}$-K$_2$O=12-8-8 kg/10a. The measurements were made 8 times every 9-10 days after the transplanting. About 60 days after the transplanting, there exhibited little variabilities in the dry matter caused by different rates of nitrogen application. After that. however, there showed large variabilities and the dry matter increased with the application rate. The nitrogen content of paddy also increased with the application rate but it was inconsistent. After the tillering period, the nitrogen content remained constant. In the early stage of the tillering period the nitrogen content decreased in spite of increase in the dry matter. However. after a certain period of time it increased with the dry matter. There were little variabilities of chlorophyll after the transplanting. However, the SPAD increased with application rate of nitrogen as the paddy grew. After the tillering period SPAD was not affected by the different rates. More yield was obtained at the plots where larger nitrogen content was measured.d.

• Journal of Ginseng Research
• /
• v.38 no.1
• /
• pp.73-77
• /
• 2014

Field and nutrient cultures of American ginseng (Panax quinquefolius L.) were used to establish foliar symptoms related to boron (B) concentration in leaves and soils, and to evaluate radish as a time-saving model system for B nutrition. Application of excess B, 8 kg/ha versus the recommended 1.5 kg/ha, to field plantings of 2-, 3-, and 4-yr-old American ginseng plants just prior to crop emergence caused, within 4 wk after crop emergence, leaf symptoms of chlorosis followed by necrosis starting at the tips and progressing along the margins. The B concentration in leaves of 2-4-yr-old plants receiving 1.5 kg/ha Bwas $30{\mu}g/g$ dry mass compared to $460{\mu}g/g$ dry mass where 8 kg/ha B was applied. Similarly, B concentration in soils receiving the lower B concentration was 1.8 mg/g dry mass and $2.2-2.8{\mu}g/g$ dry mass where the higher B concentration was applied. Application of 8 kg/ha B reduced the dry yield of 3rd-yr roots by 20% from 2745 kg/ha to 2196 kg/ha and 4th-yr roots by 26% from 4130 kg/ha to 3071 kg/ha. Ginseng seedlings and radish were grown under greenhouse conditions in nutrient culture with four B concentrations ranging from 0 mg/L to 10 mg/L. At 5 mg/L and 10 mg/L ginseng and radish developed typical leaf B toxicity symptoms similar to those described above for field-grown plants. Increasing B in the nutrient solution from 0.5 mg/L to 10 mg/L decreased, in a linear fashion, the root and leaf dry mass of ginseng, but not radish. Given the many similarities of ginseng and radish to B utilization, radish might be used as a timesaving model system for the study of B, and other micronutrients, in the slow-growing perennial ginseng.

• Animal Bioscience
• /
• v.35 no.5
• /
• pp.778-788
• /
• 2022

Objective: The objective of the study was to understand and document socio-economic characteristics, production parameters, challenges and management practices used by Fijian households which keep indigenous chickens. Methods: A survey involving 200 households was carried out in coastal and inland communities of Fiji's wet and semi-dry ecoregions. Data on the influence of ecoregion and location of households relative to the sea on management practices, challenges and productivity of indigenous chickens were analyzed using logistic regression and general linear model of SAS software. Results: Irrespective of location relative to the sea and ecoregion, households indicated that they kept indigenous chickens for food and income generation. The Welsummer was the most (p>0.05) preferred breed. Households in the semi-dry inland communities had the largest (p<0.05) flocks compared to those in semi-dry coastal communities and the wet region. Chickens in the semi-dry region performed better (p<0.05) than those in the wet region in terms of number of clutches per year and mature live weight. Predators and feed shortages were the biggest challenges faced by households in all areas. The mongoose was ranked as the most (p>0.05) common predator followed by domestic dogs. Most households in the wet ecoregion's coastal communities housed their chickens at night, whereas communities in semi-dry ecoregion housed their chickens most of the time (p<0.05). In all regions, no households sold their chickens to commercial markets (p>0.05). Households in semi-dry ecoregion were more likely (p>0.05) to sell their chickens at the local market place. Conclusion: The productivity of local chickens in Fiji is low because of feed shortage, predators such as the mongoose and lack of market linkages.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.2
• /
• pp.19-27
• /
• 2007

Dry and wet test methods established by Korean industrial standards to estimate opening size of 3 types of geotextile which are widely used for filter of plastic drain board in Korea are performed to evaluate characteristics of the test methods and to compare the test results. Judging from test results, dry method is a relatively poor test, having lots of problems causing many errors but a simple-quick test. Wet method is a very specific test avoiding many of the problems of dry method such as electrostatic charges, trapping in the geotextiles and so on. However, one of wet test methods, KS K ISO 12956, takes long time to complete a test and is too strict to handle loss of granular material. Generally, opening size of a geotextile by wet test method is smaller than that of dry test method. Especially, opening size by KS F 2126 which is called hydrodynamic method but at present is not used anymore is similar to or smaller than that by KS K ISO 12956 method.

• Proceedings of the Korean Environmental Health Society Conference
• /
• 2004.06a
• /
• pp.92-106
• /
• 2004

Elemental dry deposition fluxes were measured using dry deposition plates from March to June 1998 in Seoul, Korea. During this spring sampling period several yellow sand events characterized by long-range transport from China and Mongolia impacted the area. Understanding the impact of yellow-sand events on atmospheric dry deposition is critical to managing the heavy metal levels in the environment in Korea. In this study, the measured flux of a primarily crustal metal, Al and an anthropogenic metal, Pb was used with two hybrid receptor models, potential source contribution function (PSCF) and residence time weighted concentration (RTWC) for locating sources of heavy metals associated with atmospheric dry deposition fluxes during the yellow-sand events in Seoul, Korea. The PSCF using a criterion value of the 75th percentile of the measured dry deposition fluxes and RTWC results using the measured elemental dry deposition fluxes agreed well and consistently showed that there were large potential source areas in the Gobi Desert in China and Mongolia and industrial areas near Tianjin, Tangshan, and Shenyang in China. Major industrial areas of Shenyang, Fushun, and Anshan, the Central China loess plateau, the Gobi Desert, and the Alaskan semi-desert in China were identified to be major source areas for the measured Pb flux in Seoul, Korea. For Al, the main industrial areas of Tangshan, Tianjin and Beijing, the Gobi Desert, the Alashan semi-desert, and the Central China loess plateau were found to be the major source areas. These results indicate that both anthropogenic sources such as industrial areas and natural sources such as deserts contribute to the high dry deposition fluxes of both Pb and Al in Seoul, Korea during yellow-sand events. RTWC resolved several high potential source areas. Modeling results indicated that the long-range transport of Al and Pb from China during yellow-sand events as well as non yellow-sand spring daytimes increased atmospheric dry deposition of heavy metals in Korea.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.15 no.1
• /
• pp.19-26
• /
• 2005

In previous report, we presented that petroleum based solvents used in dry cleaning shop was almost similar to stoddard solvent defined by ACGIH and NIOSH, and the occupational exposure standard of stoddard solvent could be used in total exposure assessment of those solvents. The specific aim of the this study was to evaluate of the solvent exposure used in commercial dry cleaning shops by using occupational exposure standard of stoddard solvent. We conducted first survey of 8 self-employed dry cleaning shops and 5 factory type dry cleaning shops from July to August, and second survey of the same shops from October to November in 2002. The exposure concentration to the solvent during loading and unloading activity of vented dry cleaning machine was 489.2ppm(GM), 270.3ppm(GM), respectively, which was almost excursion limit(500ppm) of ACGIH, and exceed the ceiling limit(312ppm) of NIOSH. The time-weighted average (TWA) worker exposure to the solvent was 21.3ppm(GM) at self-employed shops, 20.7ppm(GM) at factory type shops on first survey, and 31.1ppm(GM), 33.7ppm(GM), respectively on second survey. The TWA exposure concentration of workers with spotting and cleaning machine operating job was 25.4ppm(GM), which was 2.9 times higher than the TWA exposure concentration, 8.8ppm(GM) of press workers. All TWA exposure concentrations was lower than OEL(100ppm) of stoddard solvent. We found that the most heavy exposure process at dry cleaning was loading, unloading process, and the vent of dry cleaning machine was the main emission source for workers exposure to petroleum based solvent.

• Korean Journal of Materials Research
• /
• v.14 no.8
• /
• pp.573-578
• /
• 2004

Newly developed silicide materials for ULSI should have the appropriate electrical property of low resistant as well as process compatibility in conventional CMOS process. We prepared $NiCoSi_x$ silicides from 15 nm-Co/15 nm-Ni/Si structure and performed contact dry etch process to confirm the dry etch stability and compatibility of $NiCoSi_x$ layers. We dry etched the photoresist/SiO/silicide/silicon patterns with $CF_4\;and\;CHF_3$ gases with varying powers from 100 to 200 W, and pressures from 45 to 65 mTorr, respectively. Polysilicon and silicon active layers without silicide were etched $0\sim316{\AA}$ during over etch time of 3min, while silicon layers with proposed $NiCoSi_x$ silicide were not etched and showed stable surfaces. Our result implies that new $NiCoSi_x$ silicides may replace the conventional silicides due to contact etch process compatibility.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.04a
• /
• pp.223-226
• /
• 2004

In this paper, removal of diesel hydrocarbons (C$_{10}$-C$_{22}$) for dry and moist soil was investigated so that microwave-enhanced soil vapor extraction(SVE) reduced soil treatment time and raised remediation efficiency. Kinetic constants of diesel hydrocarbons with microwave energy were 7 times on dry soil and 1580 times on moist soil as much as those of SVE process without microwave energy. The diesel removals were 67.7～78.4% for $C_{10}$ and $C_{12}$, and 0～18.5% for $C_{14}$～C$_{22}$ for dry and moist soil with SVE process only. On the other hand, dry soil with microwave-enhanced SVE process showed 89.3～99.4% removal for $C_{10}$ and $C_{12}$ and 35.6～67.0% for hydrocarbons over $C_{14}$. All hydrocarbons(C$_{10}$～C$_{22}$) studied were significantly removed (93.6～99.8%) for moist soil with microwave-enhanced SVE process. Almost all diesel hydrocarbons were usually considered as semi-volatile compounds(SVOCs). Microwave-enhanced SVE process might have a great potential for remediation of soils contaminated with SVOCs.OCs.

• Journal of the Korean Society for Railway
• /
• v.13 no.1
• /
• pp.78-83
• /
• 2010

On the paved track, the ballast is used as aggregate for the filling layer using the pre-packed concrete technique. The most important condition of aggregate is adhesive strength with mortar. To satisfy this condition, surface of aggregate should be cleaned by water or others. In a paved-track method to be introduced domestically, an environment-friendly dry-washing technology which will replace the water-washing method has been developed. A dry-washing method was designed to blast the crushed weight material with a diameter of 0.3~0.5mm at high pressure to peel the surface of the aggregate. The study was intended to enhance the washing efficiency of dry-blasting technology and to that end, the tests including blasting material, content of fine aggregate depending on time elapsed, content of chloride, LA abrasion rate and compressive strength were conducted to recommend the efficient washing material and the process.