• Korean Journal of Medicinal Crop Science
• /
• v.24 no.1
• /
• pp.21-26
• /
• 2016

Background : Acer pictum is a deciduous tree belonging to the family Aceraceae. This study was conducted to collect basic data on mass propagation techniques by surveying the germination and growth characteristics of A. pictum seeds. Methods and Results : A. pictum seeds were harvested in 2014 on August 19, September 5, September 29 and October 31. The seeds were then sown on the same dates they were harvested. A portion of seeds harvested in August 2014 were stored at low temperatures and subsequently sown on March 11, 2015. The germination rate of A. pictum seeds was highest in seeds that were stored harvested on October 31. Mean germination time (MGT) was shortest and germination velocity (Rs) was fastest in seeds harvested on October 31. Root collar diameter, total root length, and dry weight were also highest from seeds collected October 31. Conclusions : A. pictum seeds harvested on October 31 had highest germination and growth rates compared with seeds harvested on earlier dates. It is expected that these results demonstrating optimum harvesting and sowing dates will be applicable to future seedling production for this tree species.

• Journal of Nutrition and Health
• /
• v.25 no.7
• /
• pp.569-577
• /
• 1992

To study the effects of the age and the dietary protein content on Ca metabolism male rats of 1 month 6 month 12 month of age were fed experimental diets containing 5%, 15% or 50% casein for 4 weeks. Food and ca intake were higher in old rats and in high protein groups. The weight ash and Ca contents of femur and tibia were higher in old rats. The higher dietary protein level resulted in higher skeletal weigh ash and Ca contents. But high protein diet(50% casein) lead to reduced bone mineral density(ash/dry bone weight) and Ca density(Ca/dry bone weight) in 1 month old rats. Low protein diet(5% casein) on the other hand reduced the bone growth even though the bone density was higher in this group. The ill effect of low protein diet was not evident in 12 month old rats. Glomerular filteration rate(GFR) and urinary Ca excretionincreased with age and with dietary protein level especially in 12 month old rats. Serum immunoreactive parathyroid hormone(iPTH) level tended to be higher in aged rats but was not affected by dietary protein level except 1 month old rats where 50% protein group showed significantly higher value. This study showed that the dietary protein level seemed to have different effect on Ca metabo-lism in rats of different age., The low bone density in the high protein group of growing rats may be due to the higher iPTH level and increased urinary Ca. The dietary protein level however had no effects on the bone composition in aged rats even though the higher urinary Ca excretion. In conclusion this study suggests that high protein intake from young may lead to less peak bone mass and to increase the bone loss in later years, which would increase the risk for osteporosis.

• Fisheries and Aquatic Sciences
• /
• v.10 no.3
• /
• pp.113-118
• /
• 2007

Bromophenols are a group of compounds found only in marine organisms. They accumulate and give a sea-like aroma to marine animals. Cultivated fishes generally contain low concentrations of bromophenols compared to wild fishes. Feeding cultivated fishes with bromophenol-containing seaweed could increase their bromophenol content and thus improve their flavor quality. We evaluated the effect of an experimental feed on the bromophenol content of green grouper, Epinephelus coioides, during an 8-week feeding period. Green grouper individuals were divided into two groups and fed with conventional feed or experimental feed containing dried seaweed. Fish were collected biweekly for 8 weeks for proximate analyses and bromophenol content evaluations. Bromophenols were extracted, identified, and quantified by gas chromatography-mass spectrometry. Both moisture and lipid contents were generally higher in the controls; however, total weight and protein content were higher in the experimental group. Only 2,4-dibromophenol and 2,4,6-tribromophenol were detected in the samples. Throughout the 8 weeks, 2,4,6-tribromophenol concentrations were higher in the experimental group (9.20-32.3 ng/g dry wt) than in the control group (7.33-18.79 ng/g dry wt), but no significant difference in 2,4-dibromophenol concentration was detected between the two groups. The total bromophenol content reached a maximum at week 4 for the experimental feed and week 6 for the control. In short, experimental feed that incorporated bromophenol-containing seaweed increased the total bromophenol content in the green grouper.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.19 no.2
• /
• pp.197-215
• /
• 2015

Modeling water flow in variably saturated, porous media is important in many branches of science and engineering. Highly nonlinear relationships between water content and hydraulic conductivity and soil-water pressure result in very steep wetting fronts causing numerical problems. These include poor efficiency when modeling water infiltration into very dry porous media, and numerical oscillation near a steep wetting front. A one-dimensional finite element formulation is developed for the numerical simulation of variably saturated flow systems. First order backward Euler implicit and second order Crank-Nicolson time discretization schemes are adopted as a solution strategy in this formulation based on Picard and Newton iterative techniques. Five examples are used to investigate the numerical performance of two approaches and the different factors are highlighted that can affect their convergence and efficiency. The first test case deals with sharp moisture front that infiltrates into the soil column. It shows the capability of providing a mass-conservative behavior. Saturated conditions are not developed in the second test case. Involving of dry initial condition and steep wetting front are the main numerical complexity of the third test example. Fourth test case is a rapid infiltration of water from the surface, followed by a period of redistribution of the water due to the dynamic boundary condition. The last one-dimensional test case involves flow into a layered soil with variable initial conditions. The numerical results indicate that the Crank-Nicolson scheme is inefficient compared to fully implicit backward Euler scheme for the layered soil problem but offers same accuracy for the other homogeneous soil cases.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.43 no.1
• /
• pp.23-27
• /
• 1998

Inhibition of nodule formation and nitrogen fixation by soil nitrogen, primarily nitrate, is well known in legume plants. The present study was undertaken to evaluate the effect of ${NO_3}^-$ on the nodulation, nitrogenase activity, and growth of supernodulating soybean mutant and its wild type. A greenhouse study was conducted to compare two of supernodulating mutants, 'SS2-2' and 'nts 382', with the normal nodulating cultivar 'Sinpaldalkong 2' when grown in a 1-l styroform cup filled with sand, and fertilized with five levels of ${NO_3}^-$ (0, 2, 4, 8, and 12 mM). During the growth period, each plant was supplied two or three times a week with 50 mL of nutrient solution. Supernodulating soybean mutants, SS2-2 and nts 382, showed more nodules and nodule mass, and greater $C_2\;H_2$ activity than the wild type, Sinpaldalkong 2, regardless of the level of exogeneous nitrogen supply. On the other hand, total dry weight of SS2-2 mutant, which was smaller than Sinpaldalkong 2, did not respond to the various ${NO_3}^-$-N levels. This suggested that supernodulating SS2-2 mutant could maintain fairly high total dry weight at the low ${NO_3}^-$-N level, even in the absence of exogeneous ${NO_3}^-$-N in the nutrient solution. From the reduced top growth and high nitrogen fixing ability of supernodulating mutants, it was surmised that supernodulating mutant could potentially protect agricultural environments from pollution through the reduction in nitrogen fertilization as well as maintain fairly high yield with increasing planting density.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.12S
• /
• pp.1187-1194
• /
• 2003

A BCl$_3$/Ne plasma chemistry was used to etch Ga-based (GaAs, AIGaAs, GaSb) and In-based (InGaP, InP, InAs and InGaAsP) compound semiconductors in a Planar Inductively Coupled Plasma (ICP) reactor. The addition of the Ne instead of Ar can minimize electrical and optical damage during dry etching of III-V semiconductors due to its light mass compared to that of Ar All of the materials exhibited a maximum etch rate at BCl$_3$ to Ne ratios of 0.25-0.5. Under all conditions, the Ga-based materials etched at significantly higher rates than the In-based materials, due to relatively high volatilities of their trichloride etch products (boiling point CaCl$_3$ : 201 $^{\circ}C$, AsCl$_3$ : 130 $^{\circ}C$, PCl$_3$: 76 $^{\circ}C$) compared to InCl$_3$ (boiling point : 600 $^{\circ}C$). We obtained low root-mean-square(RMS) roughness of the etched sulfate of both AIGaAs and GaAs, which is quite comparable to the unetched control samples. Excellent etch anisotropy ( > 85$^{\circ}$) of the GaAs and AIGaAs in our PICP BCl$_3$/Ne etching relies on some degree of sidewall passivation by redeposition of etch products and photoresist from the mask. However, the surfaces of In-based materials are somewhat degraded during the BCl$_3$/Ne etching due to the low volatility of InCl$_{x}$./.

• Journal of Life Science
• /
• v.25 no.7
• /
• pp.780-785
• /
• 2015

Dietary intake and bioavailability of phorotannins in abalone was investigated after feeding with the phlorotannin-rich brown seaweed Ecklonia stolonifera after 4 days starvation. Reverse-phase high-performance liquid chromatography (RP-HPLC) affords isolation and quantification of the major phlorotannins of 7-phloroeckol and eckol, which were identified by mass spectrometry and nuclear magnetic resonance. Abalone growth and feed consumption rates were similar when fed either with the E. stolonifera or the common feed seaweed Saccharina japonica for 20 days. Throughout the feeding period, 7-phloroeckolol was accumulated in the abalone flesh tissue up to an average of 0.58±0.13 mg/g dry weight after 6 days. Eckol was reached to 0.25±0.05 mg/g dry tissue after 6 days, and maintained the level until end of feeding period. By feeding S. japonica as a control, no phlorotannins were detected in the abalone tissues. Both of the abalone, fed with E. stolonifera or S. japonica, had enzymes that decomposed 7-phloroeckol and eckol in muscle tissues, with similar degradation rates of −0.05 or less and −0.05 mg/ml/hr, respectively. Phlorotannins were reduced by constitutive enzymes in abalone tissues. Therefore, value-added abalone containing bioactive phlorotannins can be produced by simply changing the feed to the phlorotannin-rich brown seaweed E. stolonifera 6 days before harvest.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.26 no.1
• /
• pp.39-45
• /
• 2018

Research on FA(Fly ash) is actively carried out, while the research on BA(Bottom ash) is not so, and research on BA recycling field is urgently required. Therefore, in this study, we investigated the lightweight and thermal insulation characteristics of BA mortar by comparing BA mortar made with porous dry BA(air-cooled) and general mortar. To investigate the lightweight of BA, density test, unit volume mass test and SEM(Scanning Electron Microscope) test were performed. BA mortar and general mortar molds were prepared for the thermal insulation test at room temperature and humidity environment determined by KS A 0006 and they were dried at the temperature of $105{\pm}2^{\circ}C$ until the weight became constant. As a result of the lightweight test, the lightweight of BA mortar is about 30% lighter than the general mortar. Therefore, BA is expected to contribute to reduce the building load when used as building material. As a result of thermal insulation test, the thermal conductivity of BA mortar is about 30% better than that of general mortar.

• Mycobiology
• /
• v.35 no.2
• /
• pp.54-61
• /
• 2007

Two isolates of Tricholoma matsutake T-008 and T-034, preserved in Entomopathogenic Fungal Culture Collection (EFCC) of Korea, were used in the present study. The isolates had 100% Bootstrap homology with Tricholoma matsutake U62964 and T. matsutake AB188557 and AF309538 preserved in Gene Bank of NCBI. Mycelial growth of T. matsutake was highest in TMM and MYA at $25^{\circ}C$. The highest dry wt. of mycelium was obtained after 65 days of culture, when 6 mycelial discs were inoculated in 100 ml of broth in 250 ml shaking flask. Mycelial mats were observed in clumped condition at the inoculation sites of pine forest after two weeks of inoculation. After 5 months of inoculation, mycelia mats were observed growing inside soil and walls of a few inoculation sites, while mycelial mats growth up to $5{\sim}8$ cm were observed in the roots of pine tree after 6 months. The survival rate of the inoculum was about 40% of the total inoculation sites. The survival rate was found below 20% when the mycelium was inoculated in the summer. The reasons for low survival rates of the mycelium were mainly due to dry season and the soil-borne small animals such as earthworm and mole. After one year of inoculation, no external difference was observed between the artificially inoculated mycelia and the naturally existing mycelia of T. matsutake. The present study showed that fruiting bodies of T. matsutake could be produced by artificial inoculation under the appropriate environmental conditions.

• KEPCO Journal on Electric Power and Energy
• /
• v.1 no.1
• /
• pp.115-120
• /
• 2015

$K_2CO_3$-based dry regenerable sorbents were prepared by spray-drying techniques to improve mass produced $K_2CO_3-Al_2O_3$ sorbents (KEP-CO2P, hereafter), and then tested for their $CO_2$ sorption capacity by a $2,000Nm^3/h$ (0.5 MWe) $CO_2$ capture pilot plant built for Unit 3 of the Hadong thermal power station in 2010. Each of the sample sorbents contained 35 wt.% $K_2CO_3$ as the active materials with various support materials such as $TiO_2$, MgO, Zeolite 13X, $Al_2O_3$, $SiO_2$ and hydrotalcite (HTC). Their physical properties and reactivity were tested to evaluate their applicability to a fluidized-bed or fast transport-bed $CO_2$ capture process. The $CO_2$ sorption capacity and percentage utilization of $K_2CO_3$-MgO based sorbent, Sorb-KM2, was $8.6g-CO_2/100g$-sorbents and 90%, respectively, along with good mechanical strength for fluidized-bed application. Sorbs-KM2 and KT were almost completely regenerated at $140^{\circ}C$. No degradation of Sorb-KM by $SO_2$ added as a pollutant in flue gas was observed during a cycle test.