• International Journal of Air-Conditioning and Refrigeration
• /
• v.13 no.3
• /
• pp.128-137
• /
• 2005

In this study, dry and wet surface pressure drop and heat transfer characteristics of heat exchangers having plain fins were investigated. Nine samples having different fin pitches and rows were tested. The wet surface heat transfer coefficient was reduced from experimental data using enthalpy-potential method. The wet surface heat transfer coefficients were approximately equal to the dry surface values except for one row configuration. For one row configuration, the wet surface heat transfer coefficients were approximately $30\%$ lower than the dry surface values. For the pressure drop, the wet surface yielded approximately $30\%$ higher values compared with the dry surface counterpart. Data were compared with existing correlations.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.3
• /
• pp.218-229
• /
• 2004

In this study, dry and wet surface pressure drop and heat transfer characteristics of heat exchangers having plain fins were investigated. Nine samples having different fin pitches and rows were tested. The wet surface heat transfer coefficient was reduced from experimental data using enthalpy-potential method. The wet surface heat transfer coefficients were approximately equal to the dry surface values except for one row configuration. For one row configuration, the wet surface heat transfer coefficients were approximately 30% lower than the dry surface values. For the pressure drop, the wet surface yielded approximately 30% higher values compared with the dry surface counterpart. Data were compared with existing correlations.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.11 no.1
• /
• pp.19-25
• /
• 2006

With particular regards to the hepatitis A virus (HAV), a terminal dry-heat treatment ($100^{\circ}C$ for 30 min) process, following lyophilization, was developed to improve the virus safety of a solvent/detergent-treated antihemophilic factor IX concentrate. The loss of factor IX activity during dry-heat treatment was of about 3%, as estimated by a clotting assay. No substantial changes were observed in the physical and biochemical characteristics of the dry-heat-treated factor IX compared with those of the factor IX before dry-heat treatment. The dry-heat-treated factor IX was stable for up to 24 months at $4^{\circ}C$, The dry-heat treatment after lyophilization was an effective process for inactivating viruses. The HAV and murine encephalomyocarditis virus (EMCV) were completely inactivated to below detectable levels within 10 min of the dry-heat treatment. Porcine parvovirus (PPV) and bovine herpes virus (BHV) were potentially sensitive to the treatment. The log reduction factors achieved during lyophilization and dry-heat treatment were ${\ge}5.60$ for HAV, ${\ge}6.08$ for EMCV, 2.64 for PPV, and 3.59 for BHV. These results indicate that dry-heat treatment improves the virus safety of factor IX concentrates, without destroying the activity. Moreover, the treatment represents an effective measure for the inactivation of non-lipid enveloped viruses, in particular HAV, which is resistant to solvent/detergent treatment.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.5
• /
• pp.997-1003
• /
• 2008

Viral safety is a prerequisite for manufacturing clinical antihemophilic factor VIII concentrates from human plasma. With particular regard to the hepatitis A virus (HAV), a terminal dry-heat treatment ($100^{\circ}C$ for 30 min) process, following lyophilization, was developed to improve the virus safety of a solvent/detergent-treated antihemophilic factor VIII concentrate. The loss of factor VIII activity during dry-heat treatment was of about 5%. No substantial changes were observed in the physical and biochemical characteristics of the dry-heat-treated factor VIII compared with those of the factor VIII before dry-heat treatment. The dry-heat-treated factor VIII was stable for up to 24 months at $4^{\circ}C$. The dry-heat treatment after lyophilization was an effective process for inactivating viruses. The HAV, murine encephalomyocarditis virus (EMCV), and human immunodeficiency virus (HIV) were completely inactivated to below detectable levels within 10 min of the dry-heat treatment. Bovine herpes virus (BHV) and bovine viral diarrhea virus (BVDV) were potentially sensitive to the treatment. However porcine parvovirus (PPV) was slightly resistant to the treatment. The log reduction factors achieved during lyophilization and dry-heat treatment were ${\geq}5.55$ for HAV, ${\geq}5.87$ for EMCV, ${\geq}5.15$ for HIV, 6.13 for BHV, 4.46 for BVDV, and 1.90 for PPV. These results indicate that dry-heat treatment improves the virus safety of factor VIII concentrates, without destroying the activity. Moreover, the treatment represents an effective measure for the inactivation of non-lipid-enveloped viruses, in particular HAV, which is resistant to solvent/detergent treatment.

• Journal of Environmental Science International
• /
• v.32 no.2
• /
• pp.121-130
• /
• 2023

This study was conducted to investigate changes in seed vigor based on temperature of dry heat and duration treatment of watermelon seeds and examine the effect on percent of emergence and seedling vigor. When the upper limit temperature of dry heat treatment was raised to 80℃, the percent of the germination decreased. Moreover, T₅₀ was delayed as the upper limit temperature of dry heat treatment increased. The higher the upper limit temperature of dry heat treatment and the longer the treatment period, the higher the percentage of abnormal seedlings. The optimum upper limit temperature for dry heat treatment was 72℃, and the treatment period was five days. Seed vigor was better maintained at 30℃, 45℃, and 52℃, followed by stepwise exposure to high temperatures of 72℃, the upper limit of dry heat treatment, rather than dry heat treatment at a high temperature of 72℃ for 5 days from the initial stage of treatment. When the fungicide was added during the dry heat treatment process, the germination percentage decreased and the percent of the abnormal seedling percentage increased. However, the addition of 10 mg/kg fungicide did not significantly reduce seed vigor.

• Journal of Sasang Constitutional Medicine
• /
• v.27 no.1
• /
• pp.57-70
• /
• 2015

Objectives This research was performed to present Clinical Practice Guideline(CPG) for Taeeumin Disease of Sasang Constitutional Medicine(SCM): Liver Heat-based Interior Heat (Gansuyeol-liyeol) disease. This CPG was developed by the national-wide experts committee consisting of SCM professors. Methods First, it was performed that search and collection of literature related to SCM such as "Dongeuisusebowon", Textbook of SCM, Clinical Guidebook of SCM and fundamental researches to standardize the diagnosis of Sasang Constitutional Medicine. And journal search related to clinical trials and case studies concerning SCM was performed domestic and overseas. Finally, 12 articles were selected and included in CPG for Liver Heat-based Interior Heat (Gansuyeol-liyeol) disease in Taeeumin Disease. Experts consensus was drawn through several meetings. Results & Conclusions CPG of Liver Heat-based Interior Heat (Gansuyeol-liyeol) disease in Taeeumin Disease include classification, definition and standard symptoms of each pattern. Liver Heat-based Interior Heat (Gansuyeol-liyeol) disease is classified into Liver-Heat (Ganyeol) symptomatology and Liver-Heat Lung-Dry (Ganyeol-paeJo) symptomatology. Depending on the severity of Liver Heat, Liver-Heat (Ganyeol) symptomatology is classified into mild pattern and moderate pattern. Mild pattern contains 1 disease, namely, Liver-Heat (Ganyeol) initial pattern. Moderate pattern classified into advanced pattern and intense pattern. Depending on the severity of the Lung-Dry, Liver-Heat Lung-Dry (Ganyeol-paeJo) symptomatology is classified into severe pattern and critical pattern. Severe pattern is classified into Dry-Heat (Joyeol) pattern and Dry-Heat (Joyeol) advanced pattern. Critical pattern contains 1 disease, namely, Dry-Heat (Joyeol) intense pattern (Eumhyeol-mogal yeolda pattern).

• Journal of Animal Science and Technology
• /
• v.65 no.1
• /
• pp.197-208
• /
• 2023

The objective of this study was to investigate the effects of a traditional dry period (60 d) versus a no dry period (0 d) on the milk production, physiological response, and metabolic status of dairy cows exposed to heat stress during the transition period. Holstein dairy cows (n = 15) with similar expected calving dates were randomly assigned to two different dry period lengths: (1) no dry period (n = 7) and (2) a traditional dry period of 60 days (n = 8). All cows were studied from 8 weeks before expected calving to 10 weeks after calving and experienced heat stress during the transition period. The results showed that cows with no dry period decreased their milk yield in subsequent lactation, but compensated for the loss of milk yield accounted for by additional milk yield before calving. The energy balance at postpartum was improved in cows with no dry period compared to cows with a traditional dry period. There were no significant differences in the physiological response and blood metabolites at postpartum between the dry period lengths of dairy cows exposed to heat stress during the transition period. Taken together, our results showed that omitting the dry period improved the milk production and metabolic status of dairy cows exposed to heat stress during the transition period.

• Journal of Ginseng Research
• /
• v.16 no.2
• /
• pp.99-104
• /
• 1992

Korean red ginseng and water extract residue of red ginseng roots were treated with dry heat and incorporated in PDA medium to examine the effect of the materials on induced tolerance against mercury chloride and mycelial growth of Fusarium oxysporum. Ginseng residue was not effective in the inducement of tolerance to mercury chloride regardless of dry heat treatment. However, the heat treatment of ginseng and ginseng residues stimulated the mycelial growth of the fungus. The materials responsible for the detoxification appeared to be water-soluble. The stimulation of the fungal mycelial growth on the media by the heat treatment was highest in the water extract of ginseng. Due to the heat treatment, the mycelial growth was also slightly increased in n-hexane and methanol extracts of ginseng, compared with the ginseng fractions without dry heat treatment.

• Fibers and Polymers
• /
• v.5 no.1
• /
• pp.19-24
• /
• 2004

PET yarns textured at different texturing conditions were treated with superheated steam or dry heat at different temperatures for different times. The effects of the treatment conditions on the thermomechanical and structural changes of the yarn were examined by shrinkage, X-ray diffraction and birefringence measurements. With increase in superheated steam temperature, the crystalline orientation factor and birefringence decreased, whereas crystal size increased. Dry heat treatment had a smaller effect on shrinkage and structural properties in comparison with superheated steam treatment. The additional shrinkage after texturing process was investigated. The effect of heat-setting in both media was more significant at $200^{\circ}C$. The time dependence of the properties was not linear.

• Nuclear Engineering and Technology
• /
• v.39 no.2
• /
• pp.143-148
• /
• 2007

Spent nuclear fuel generated at nuclear power plants must be safely stored during interim storage periods. A dry storage cask to safely store the spent nuclear fuel should be able to adequately emit the decay heat from the spent nuclear fuel. Therefore, heat removal tests using a half scale dry storage cask have been performed to estimate the heat transfer characteristics of a dry storage cask under normal, off-normal, and accident conditions. In the normal condition, the heat transfer rate to an ambient atmosphere by convective air through a passive heat removal system reached 83%. Accordingly, the passive heat removal system is designed well and works adequately. In the off-normal condition, the influence of a half blockage in the inlet on the temperature appears minimal. In the accident condition, the temperature rose for 12 hours after the accident, but the temperature rise steadied after 36 hours.