• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.8 no.1
• /
• pp.23-26
• /
• 2002

This study was carried out to investigate vibration shock and dropping shock of refrigerator during physical distribution. The values of vibration shock were measured to be ${\sim}3G$ for up and down direction, ${\sim}0.8G$ for right and left direction and ${\sim}0.5G$ for back and forth direction on the national road. There was no damage during transport. From the results of dropping test by KS A 1026(General Rules of Performance Testing for Packaged Freights), relative equations were gained as follow : y = 0.12x + 7.63(where y is G-factor and x is Dropping height). The maximum values of dropping shock during materials handling were measured to be 11G. This shock value was corresponding to dropping shocks of dropping height 28.3cm by KS A 1026.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.6 no.1
• /
• pp.37-40
• /
• 2000

This study was carried out to investigate dropping shock of household electric appliances during materials handling. Microwave oven($18{\ell}$), TV(16") and washing machine(6.2kg) were singled out as the study items. From the results of dropping test by KS A 1026(General Rules of Performance Testing for Packaged Freights), relative equations were gained as follow : y=0.0863x+10.032 for microwave oven, y=0.136x+7.85 for TV and y=0.214x+5.8 for washing machine (where y is G-factor and x is Dropping height). The maximum values of dropping shock during materials handling were measured to be $11{\sim}14G$ for microwave oven, $12{\sim}15G$ for TV and $10{\sim}12G$ for washing machine. The maximum shocks of microwave oven, TV and washing machine during materials handling were corresponding to dropping shocks of dropping height 45.98cm, 52.57cm and 28.97cm by KS A 1026.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.173-176
• /
• 2004

Nowadays, mobile devices are very common equipments such as mobile phone, PDA, etc. These equipments need information storage devices. Optical storage devices have more advantages than other storage devices, but it is not free from shock situation like dropping by user's mistakes. A complete model of a Small Form Factor Optical(SFFO) disk drive subject to shock loads is developed to investigate the response of the pickup/disk interface. With this model, we can simulate the drop test and consider the matters of shock simulation using commercial software(Ansys/LS-Dyna).

• Journal of KSNVE
• /
• v.2 no.1
• /
• pp.41-47
• /
• 1992

In order to reduce the shock which may occur during shipping of a drumtype container, rubber mounts were designed using a commercial FEM package and manufactured, and then the performance was checked by static and dynamic test. According to the design specifications, the container system was tested by dropping. The experimental results are compared with the theoretical ones.

• Journal of Aerospace System Engineering
• /
• v.17 no.2
• /
• pp.86-93
• /
• 2023

Pyrotechnic separation devices have been widely used as holding and release mechanism for deployable appendage. However, pyro-shock can cause temporal or permanent damage on shock sensitive components such as electronics, mechanism, and brittle components. This study proposed a low-stiffness blade based passive shock absorber using a multi-layered stiffener laminated with viscoelastic acrylic tapes for reducing transmitted pyro-shock upon explosion of pyrotechnic separation devices. The multi-layered structure with viscoelastic tape has high-damping characteristics to effectively secure structural integrity of low-stiffness blades under the launch environment. The design effectiveness was verified through a shock test by dropping a pendulum. The structural integrity of the shock absorber under a launch environment was evaluated through structural analysis under load conditions with a deployable payload.

• Journal of the Korean Society of Safety
• /
• v.27 no.5
• /
• pp.196-202
• /
• 2012

An industrial safety helmet primarily intended to protect the wearer's head. It is to prevent or reduce the danger due to flying or dropping objects, falling and prevent the danger due to an electric shock given to the head. However, thermal discomfort of the head is one of the main complaints in the case of wearing safety helmet. Ventilation holes are not allowed in safety helmets on domestic regulations except for industrial safety helmets which are to protect wearer's head against flying or dropping objects. This paper is to produce the need for enlargement of allowing on ventilation holes' regulation to class B. This study reviewed foreign standards' regulations on ventilation holes of safety helmets. Some standards recommend that ventilation may be improved when fresh air is able to enter the helmet around its lower edge and to exit via holes in the helmet located in the upper one third of the helmet. And in the experiments, relationships of ventilation holes and the temperature over the head are analyzed. The experimental results show that the cooling effect of ventilation holes in the upper one third of the helmet is meaningful.

• International Journal of Aerospace System Engineering
• /
• v.3 no.2
• /
• pp.22-25
• /
• 2016

This dissertation tried to analyze passenger behaviors after an accident with the possibilities of a variety of accidents open reflecting the phases of the times of increasing interests in safety of passengers as the use of means of transportation such as cars and airplanes is increasing. Because a lot of data on head-on collisions, broadside collisions and reverse side collisions have been gathered through lots of experiments and interpretations, I chose to study a relatively unfamiliar subject, dropping collision. For example, I tried to study passenger behaviors in seating position after a dropping collision in preparation for falling accidents due to recent frequently-occurring sinkholes, driver's carelessness or mechanical problems. I used MADYMO, passenger behavior interpretation program, and experimented with 2 meters high Drop Test device which I made in person to increase the reliability of the results. On the basis of these, I compared the real experiments with interpretations.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.6
• /
• pp.119-126
• /
• 2000

In this paper. a simple high-speed crash test rig for members of vehicle was developed for the improvement of crashworthiness of vehicle's side rail. The cart hanging the specimen is accelerated up to 35 mph by the force of freely dropping weight and 1:3 accelerating pulleys. The cart with shock absorbers travels on the rail roads, so it does not transfer any additional vibration to the specimen. To measure the test results, two types of accelerator are considered. the one is a strain gage type and the other is a piezo type. The test rig is rated good to test the specimen like a side rail of vehicle as developing the vehicle's structures in the early design stage.

• International Journal of Safety
• /
• v.4 no.2
• /
• pp.43-46
• /
• 2005

The construction workers might be at the risk of many occupational injuries and illnesses. To protect workers from various hazards, industrial health and hygiene systems were specified for the construction workers by law. It is important to know the actual health and safety(H&S) conditions by tasks and the characteristics of injuries and illnesses of construction workers. This study was designed to investigate the actual conditions of construction workers exposed to various harmful substances and work elements including evaluation of health status of each worker and general H&S system. Questionnaire was sent to 600 construction workers nationwide and totally 367 people responded to it having 61.67% of response rate. The common construction hazards were dust(29.6%), noise(19.3%), repetitive motions(12.0%), handling excessive heavy materials(11.2%) in order. The repetitive motions and handling heavy materials related to muscle disorders accounted for 23.2%. The accident and injury types were in order of overexertion, falling, overturning, dropping or flying, electric shock, collision, etc.

• International Journal of Precision Engineering and Manufacturing
• /
• v.3 no.3
• /
• pp.21-27
• /
• 2002

In this paper, a simple test rig of high-speed crash for the front members of vehicles was developed for the improvement of crashworthiness of vehicle's side rail. The cart hanging the specimen is accelerated up to 35 mph by the traction wire and by the force of freely dropping weight and 1:3 accelerating pulleys. The cart with shock absorbers travels on the rail roads, so it does not transfer any additional vibration to the specimen. In order to measure the energy absorbed by the specimen when it collapse to the wall and during it deform, the two strain gage type load cells are used at the wall place. The test rig rated good to test the specimen like a side rail of vehicle as developing the vehicle's structures in the early design stage.