• 폴리머
• /
• 제34권1호
• /
• pp.25-31
• /
• 2010

무전해 니켈 도금법을 사용하여 단분산 폴리스티렌 입자 표면에 니켈이 도금된 고분자 코어/금속 쉘의 복합 입자를 제조하였다. 단분산 입자는 분산중합으로 제조하였는데 사용한 분산매질의 종류에 따라 다양한 크기의 단분산 폴리스티렌 입자를 제조할 수 있었다. 그 중 직경 $3.4\;{\mu}m$ 크기의 단분산 폴리스티렌 입자를 선택하여 무전해 니켈 도금을 시도하였다. 니켈 도금에 영향을 미치는 도금 조건을 파악하기 위하여 활성화제인 $PdCl_2$의 농도, 착화제인 glycine의 농도와 니켈 도금액의 투여 시간에 따른 니켈 도금된 폴리스티렌 복합 입자의 모폴로지를 관찰하였다. 본 연구조건하에서는 $PdCl_2$의 농도 0.4 g/L, glycine 농도 1 M 이상인 경우 폴리스티렌 입자 위에 균일한 두께의 니켈층을 형성하였고 석출되는 니켈도 적었다. 도금 시간 2 시간 중에서 동일양의 도금액을 투여 속도를 달리하며 도금한 경우 모폴로지 상의 뚜렷한 차이는 없었으나 0.15 mL/min 속도로 1시간 동안 투여한 경우가 상대적으로 균일한 도금 특성을 보여 주었다.

• 한국안광학회지
• /
• 제11권4호
• /
• pp.299-310
• /
• 2006

시판중인 렌즈 보존액 중 가장 흔히 사용 또는 유통되고 있는 $SOLOCARE^{TM}$에 대한 안점막자극성시험을 식품의약품 안전청 고시에 따라 Draize법을 이용하여 그 자극성의 정도를 평가하고, 눈에 가해질 수 있는 잠재적인 독성을 평가하기 위하여, 배출물에 대한 도말표본 상에서 염증세포 및 비 염증성 유상피세포가 차지하는 비율과 함께 점안 후 안구 중, 각막, 홍채, 망막 및 공막의 조직병리학적 관찰을 실시한 결과 다음과 같은 결과를 얻었다. 비 세척군에서는 점안 후1, 2 및 3일에 국한하여, 각막과 결막에 경미한 자극이 관찰되어, 이 기간 동안의 평균 안점막 자극지수(Mean Index of Ocular Irritation; MIOI)가 각각 4.33, 3.33 및 2.00으로 관찰되었으며, 세척군에서는 점안 후 1 및 2일에 국한하여, 결막에서 경미한 자극성이 인정되었고, 이때 MIOI는 각각 3.00과1.33으로 관찰되었다. 따라서 $SOLOCARE^{TM}$는 세척군 및 비세척군 모두에서 MIOI가 모든 관찰기간에서 5.00 이하로 관찰되었으며, 관찰기간 중 MIOI의 최대값인 IAOI(The Index of Acute Ocular Irritation) 역시점안 1일후 4.33로 관찰되어 무자극성 물질로 관찰되었다. 한편 배출물에 대한 염증성 세포의 비율은 무처치 대조군과 비교하여 점안초기 유의성은 인정되지 않았으나, 다소 증가된 경향을 나타낸 이외 의미있는 변화는 인정되지 않았다. 또한 안구의 조직병리학적 검사에서 각막, 홍채, 망막 및 공막 모두에서 무처치 대조군과 비교하여 의미 있는 변화는 인정되지 않았다.

• Journal of Acupuncture Research
• /
• 제25권6호
• /
• pp.47-54
• /
• 2008

Objectives : This study was aimed to figure out how effectively acupuncture treatment and herb-medicine work on patients with elevation of LFT value and lipid-obesity index. Methods : The subject were 23 patients visited to Dept. of Acupuncture and Moxibustion, Kwangdong Oriental Medicine Hospital, who complained chronic fatigue and wandering pain from Oct. 2007. to Oct. 2008. Before treatments, they were tested for LFT, total cholesterol, triglyceride, body fat ratio and obesity index. They were treated with Ganjeonggyeok acupuncture weekly for 1 month. During acupuncture treatments, we applied Sangkankunbi-tang to all patients twice a day. After 1 month, they were retested for LFT, total cholesterol, triglyceride, body fat ratio and obesity index. Results : 1. After treatments, we could get the result of dropping means of AST, ALT and $\gamma$-GTP value. Statistical significance of ALT and $\gamma$-GTP were recognized before and after treatments, but AST was not recognized. 2. After treatments, we also could get the result of dropping means of total cholesterol, triglyceride, body fat ratio and obesity index. Statistical significance of all values were recognized before and after treatments. 3. Among 23 patients, 10 cases were reported that they were not within normal limits at least one in AST, ALT and $\gamma$-GTP. After treatments of those patients, we could get the result of dropping means of AST, ALT and $\gamma$-GTP value. Statistical significance of all values were recognized before and after treatments. 4. Among 23 patients, 19 cases were reported that they were not within normal limits at least one in total cholesterol, triglyceride, body fat ratio and obesity index. After treatments of those patients, we could get the result of dropping means of total cholesterol, triglyceride, body fat ratio and obesity index. Statistical significance of all values were recognized before and after treatments. Conclusions : Though further study is necessary, our finding suggest that the conduction of Ganjeonggyeok acupuncture and Sangkankunbi-tang treatments have helped to decrease the figures of LFT and lipid-obesity index in patients.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2011년도 한국컴퓨터종합학술대회논문집 Vol.38 No.1(A)
• /
• pp.420-421
• /
• 2011

This paper derive an optimal distributed power control strategy under both the probability of dropping a packet due to buffer overflow constraints at the secondary users and the interference constraints to the primary users.

• 대한화학회지
• /
• 제10권3호
• /
• pp.145-147
• /
• 1966

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(1)
• /
• pp.307-310
• /
• 2000

ATM is the switching and multiplexing technology chosen by the ITU-T for the operation of B-lSDN. Basically, ATM technology is designed to combine the reliability of circuit switching with the efficiency and flexibility of packet switching technology. For servicing QoS in IPOA(IP over ATM) when the larger effort is given, it will be the good method that the original QoS benefits having ATM switching have in ATM layer underlying layer. The IETF has recently proposed Differentiated Services framework for provision of QoS. In this paper we analyse performance of two Diffserv mechanism. Threshold Dropping and Priority Scheduling. Threshold Dropping and Priority Scheduling can be regarded as basic mechanisms from which the other mechanisms have been derived. Hence comparative performance of these two mechanisms in providing required QoS is an important issue. In this Paper we carry out a performance comparison of the TD and PS mechanisms with the aim of providing the same level of packet loss to the preferred flow. Our comparison of the TD and PS allows us to determine resultant packet loss for the non-preferred flows as a function of various parameters of the two mechanisms.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.163-163
• /
• 2015

The effect of nematic liquid crystal(5CB-4-Cyano-4'-pentylbiphenyl) on the amorphous indium gallium zinc oxide thin film transistors(a-IGZO TFTs) was investigated. Through dropping the 5CB on the a-IGZO TFT's channel layer which is deposited by RF-magnetron sputtering, properties of a-IGZO TFTs was dramatically improved. When drain bias was induced, 5CB molecules were oriented by Freedericksz transition generating positive charges to one side of dipoles. From increment of the capacitance by orientation of liquid crystals, the drain current was increased, and we analyzed these phenomena mathematically by using MOSFET model. Transfer characteristic showed improvement such as decreasing of subthreshold slope(SS) value 0.4 to 0.2 and 0.45 to 0.25 at linear region and saturation region, respectively. Furthermore, in positive bias system(PBS), prevention effect for electron trapping by 5CB liquid crystal dipoles was observed, which showing decrease of threshold voltage shift [(${\delta}V$]_TH) when induced +20V for 1~1000sec at the gate electrode.

• Journal of Information Processing Systems
• /
• 제2권2호
• /
• pp.107-113
• /
• 2006

It is essential to guarantee a handoff dropping probability below a predetermined threshold for wireless mobile networks. Previous studies have proposed admission control policies for integrated voice/data traffic in wireless mobile networks. However, since QoS has been considered only in terms of CDP (Call Dropping Probability), the result has been a serious CBP (Call Blocking Probability) unfairness problem between voice and data traffic. In this paper, we suggest a new admission control policy that treats integrated voice and data traffic fairly while maintaining the CDP constraint. For underprivileged data traffic, which requires more bandwidth units than voice traffic, the packet is placed in a queue when there are no available resources in the base station, instead of being immediately rejected. Furthermore, we have adapted the biased coin method concept to adjust unfairness in terms of CBP. We analyzed the system model of a cell using both a two-dimensional continuous-time Markov chain and the Gauss-Seidel method. Numerical results demonstrate that our CAC (Call Admission Control) scheme successfully achieves CBP fairness for voice and data traffic.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2004년도 학술대회지
• /
• pp.123-129
• /
• 2004

Rolling bearings are assorted one of the most important machine elements. The various functions of bearings are greatly influenced by grease, and higher performance of rolling bearing greases is required to improve rolling bearing lubrication. The two conditions for optimum grease synthesis were selected by SSRED (Six Sigma Robust Engineering Design) program by using dropping points and OIT values respectively. And the optimized two urea/ether oil greases were synthesized to compare the performance. The typical physical properties of grease were investigated. And life test of these greases was conducted by rolling bearing grease life tester The characteristics of the greases before and after life test were investigated using FTIR, microscope, SEM, TG/DSC, OIT and TAN meter The optimized two greases showed longer life time than typical urea/ether oil grease. The optimized grease by means of OIT value showed higher performance such as long life time. low TAN value and high oil bleeding amount in comparison with the optimized grease using dropping point.

• 한국안전학회지
• /
• 제5권2호
• /
• pp.17-23
• /
• 1990

This study was performed by experiments with ASTM's apparatus for determination of autoignition temperature to obtain autoignition characteristics of 1-Heptene, 2-Heptene and 3-Heptene, respectively. As results, minimum autoignition temperatures (MAIT) of 1-Heptene, 2-Heptene and 3-Heptene were 246$^{\circ}C$, 248$^{\circ}C$ and 254$^{\circ}C$, respectively and each dropping volume of these temperatures was 0.25$m\ell$, 0.20$m\ell$ and 0.20$m\ell$. Instantaneous ignition temperatures measured at each dropping volume of Heptene were 371$^{\circ}C$, 357$^{\circ}C$ and 342$^{\circ}C$, respectively. Relation ignition delay time with ignition temperature at minimum autoignition temperature agreed well with Semenov's equation, and the values of apparent activation energy from this equation were 47Kca1/mo1 for 1-Heptene, 35Kca1/mo1 for 2-Heptene and 29Kca1/mo1 for 3-Heptene. It was found that the values of apparent activation energy decreased as the position of double bond changed from end to center in C-C chain.