• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.10
• /
• pp.1881-1891
• /
• 2000

Cenosphere particles of different fly ash formed at the pulverized coal power plant were hollow sphere or filled with small particles inside solid particles. And size was relatively larger than other fly ash particles as well as specific gravity was small to suspend in the water. In this paper, it was demonstrated to contain a variety of morphological particle type, and the physical and chemical properties related to the cenosphere and fly ash particles. Furthermore it was estimated the possibility to reuse the cenosphere particles on the base of cenosphere properties. Cenosphere formation resulted from melting of mineral inclusion in coal, and then gas generation inside the molten droplet. As the aluminosilicate particle was progressively heated, a molten surface layer developed around the solid core. Further heating leaded to cause the formation of fine particles at the core. The mass median diameter(MMD) of cenosphere particles was $123.11{\mu}m$ and the range of size distribution was $100{\sim}200{\mu}m$ with single modal. It was represented that specific density was $0.67g/cm^3$ fineness was $1135g/cm^3$. The chemical components of cenosphere were similar to other fly ash including $SiO_2$, $Al_2O_3$, but the amount of the chemical component was different respectively. In the case of fly ash, $SiO_2$ concentration was 54.75%, and $Al_2O_3$ concentration was 21.96%, so this two components was found in 76.71% of the total concentration. But in the case of cenosphere, it was represented that $SiO_2$ concentration was 59.17% and $Al_2O_3$ concentration was 30.16%, so this two components was found in 89.33% of the total concentration. Glassy component formed by the aluminosilicate was high in the cenosphere, so that it was suitable to use insulating heat material.

• Journal of fish pathology
• /
• v.19 no.1
• /
• pp.7-15
• /
• 2006

Amyloodinium sp. was found on the gills of mullet (Mugil cephalus) cultured on land. No external symptoms in the diseased fish were found except decoloration of the gills. In fresh preparations of the gills the parasites were opaque round or oval shape with a bright nucleus and 43.5 ㎛ (18.2～72.7, n=20) in size. In preparations added a drop of Lugol solution, they were black with the same shapes in fresh preparations and 43.5 ㎛ (n=20) in size. The parasites were stained black and blue in a droplet of Lugol solution and Diff-Quick III solution, respectively and their sizes were a little larger than in wet preparations. After stained with May-Grunwald Giemsa, the parasites appeared granular eosinophlic in the peripheral cytoplasm and granular strong basophilic in the center. In silver impregnated specimens the peripheral granules were negative and the central ones positive. The granules appeared brown in purplish cytoplasm after staining with Lugol solution. The parasites developed by binary division when they were cultivated in filtered seawater at 20℃. Histopathologically severe epithelial hyperplasia and fusion in the gill filaments resulted in clubbing, especially the proximal region of the filament. Epithelial hyperplasia was also found in the basal regions of the gill filaments and some epithelial cells were occasionally detached from the filaments. Some pear-shaped trophonts of the parasites with rhizoid attached on the gill filaments showing hyperplasia of the epithelial cells and mucous cells.

• Applied Microscopy
• /
• v.41 no.3
• /
• pp.155-161
• /
• 2011

Three spot gourami (Trichogaster trichopterus Pallas, 1770) is a teleost belonging to Belontiidae. The oogenesis of three spot gourami was investigated by light microscope. The ovary was of light peach color and ellipsoidal shape with the major axis 2 cm and the minor axis 1 cm. Cytoplasm of oogonia was basophilic and many nucleoli were located at inside of nuclear membrane. In primary oocyte, lipid droplets were distributed only in the marginal area first, than at nuclear envelope near. In secondary oocyte, the egg envelope was formed and yolk vesicles was formed in the marginal area. The basophilic substance of cytoplasm was changed to acidic. In case of matured egg, thickness of egg envelope and size of egg were increased. The yolk vesicles were changed to yolk mass in accordance with development. The fertilized eggs were the colorless, transparent, spherical, adhesive and pelagic type. A large oil droplet was located in vitelline membrane of the fertilized egg. In conclusion, the oogenesis of three spot gourami was characterized by the increase in cell size, the formations of lipid droplets and yolk, the decrease of basophilic substance in the cytoplasm, and formation of one large oil droplets.

• Korean Journal of Food Science and Technology
• /
• v.15 no.4
• /
• pp.342-347
• /
• 1983

The effects of barley tea concentration and atomizing air pressure on the size, homogeneity and distribution of the sprayed droplets were investigated. An equation relating mean diameter (${\overline{D}}$) with the concentration where the coefficient a and b were determined empirically. As the operating air pressure was increased, the mean diameter of the droplets decreased and finally reached the limiting mean diameter, $36{\mu}m$ at 15.7% barley tea concentration. The homogeneity of the droplets increased with the operating air pressure, increase and it was decreased steadily as the soluble solid concentration increased up to 20% and markedly over 20% at every operating air pressure. The distribution ($P_D$) of sprayed droplets related with the droplet size as the following exponential equation; $P_D$ = e 1nD + f where e and f are empirical constants.

• Korean Journal of Food Science and Technology
• /
• v.47 no.2
• /
• pp.217-223
• /
• 2015

We investigated the emulsifying properties of barley octenyl succinic anhydride (OSA)-${\beta}$-glucan, such as changes in the fat globule size and zeta-potential as influenced by pH or the addition of NaCl. Additional experiments to fabricate a suitable co-surfactant system were also performed. We found that the fat globule size in OSA-${\beta}$-glucan emulsions increased upon lowering the pH (i.e., under acidic conditions) or increasing the NaCl concentration. These results were confirmed through microscopic observation. Co-surfactant hydrophilic Tween 20 was found to be suitable for the OSA-${\beta}$-glucan emulsion, which facilitated the formation of smaller fat globules and enhanced the creaming stability when it was added in >0.2 wt% concentration. From the results of the surface load of OSA-${\beta}$-glucan in emulsions, Tween 20 addition enhanced the stability probably by the co-adsorption of the two surfactants at the droplet surface.

• Research in Plant Disease
• /
• v.22 no.1
• /
• pp.18-24
• /
• 2016

This study was conducted to elucidate the cultural and pathogenic characteristics of Cladosporium cucumerinum PT1 and resistance of 81 commercial cucumbers (Cucumis sativus). Cucumber leaves and fruits appeared as scab were collected from a plastic film house located in Pyeongtaek, Gyeonggi-province, Korea in late March, 2015. A casual fungus was isolated from the diseased fruits on potato dextrose agar and it was identified as C. cucumerinum PT1 based on the morphological characteristics. To find out the effect of wounding and fruit size on the development of cucumber scab, small (<10 cm long), medium (10 to 20 cm long), and large (>20 cm long, commercially mature fruit) size cucumber fruits were harvested, C. cucumerinum PT1 pathogens were inoculated with a single droplet of suspension ($1{\times}10^5$ spores/ml) on wounded or unwounded cucumber fruits. Small fruits were completely damaged with showing severe water-soaking symptoms and fast pathogen growth regardless of wounded or unwounded. Meanwhile slight water-soaking symptoms on medium and large size fruits occurred and disease development into plant tissues was observed only on wounded fruits. Disease resistance of 81 commercial cucumber cultivars was evaluated on third-stage seedlings and small fruits by inoculating suspension ($1{\times}10^5$ spores/ml) of C. cucumerinum PT1. As a result, mini and pickling cultivar groups were resistant, 'Cheoeumcheoreom' cultivar was symptomless and the other cultivars were resistant to medium resistant. On the other hand, most of cucumber cultivars belonging to the other groups were susceptible. Disease resistance of cucumber against cucumber scab was significantly different among cultivars and a few cucumber cultivars showed different disease resistant responses to two bioassay methods using seedlings and small fruits. Therefore, to screen scab resistance in cucumber, a test using both fruits and seedlings is advisable. We think that the selected resistant cultivars can be used to control cucumber scab effectively under the farmhouse condition.

• Applied Chemistry for Engineering
• /
• v.31 no.1
• /
• pp.19-24
• /
• 2020

In this study, the O/W emulsions prepared from coconut oil and the non-ionic mixed surfactant as Tween-Span system were evaluated and optimized in order to upgrade the stability of manufactured emulsions. For the optimization, a central composite design model-response surface methodology, so called as CCD-RSM was implemented. Quantitative factors were the hydrophile-lipophilie balance (HLB), amount of non-ionic mixed surfactant and emulsification speed while experimental results included the mean droplet size (MDS), emulsion stability index (ESI), and thermal instability index (TII). Optimized values of the HLB, amount of non-ionic mixed surfactant and emulsification speed obtained from CCD-RSM were 9.1, 8.7 wt.%, and 6,200.8 rpm, respectively. Expected experimental results for MDS, ESI, and TII under the optimized experimental condition were 151.0 nm, 99.86, and 3.17%, respectively. The average error from actual experiments which established for validation of the conclusions was lower than 3.5%. Therefore, a highly favorable level could be obtained when the optimized CCD-RSM was applied to manufacturing the O/W emulsion in this study.

• Particle and aerosol research
• /
• v.13 no.3
• /
• pp.105-110
• /
• 2017

Real-time measurements of fine particles from stack emission gases are necessary due to the needs of continuous environmental monitoring of PM10 and PM2.5. The porous tube dilutor using hot and cold dilutions was developed to measure fine particles without condensable particles from highly humid emission gases and compared to the commercialized ejector-type dilutor. Particle size distributions were measured at the emission gases from a diesel engine and a coal-fired boiler. The porous tube dilutor could successfully measure the accumulation mode particles including relatively large particles more than $3{\mu}m$ without nuclei particles, while the ejector dilutor detected some condensable particles and could not detect large particles. The porous tube dilutor could successfully remove the already condensed water droplet particles generated by a humidifier in a $30m^3$ chamber.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.1-7
• /
• 2017

The atomization of a liquid into multiple droplets has many important industrial applications, including the atomization of fuels in combustion processes and coating of surfaces and particles. Ultrasonic atomizing nozzle has a transducer that receives electrical input in the form of a high frequency signal from a power generator and converts that into mechanical energy at the same frequency. Liquid is atomized into a fine mist spray using high frequency sound vibrations. In coating applications, the unpressurized, low-velocity spray reduces the amount of overspray significantly because the droplets tend to settle on the substrate, rather than bouncing off it. The spray can be controlled and shaped precisely by entraining the slow-moving spray in an ancillary air stream using specialized types of spray-shaping equipment. The desired patterns of spray can be obtained using an air stream. To simulate the water mist behavior of an ultrasonic atomizing nozzle using an air stream, the Lagrangian dispersed phase model was employed using the commercial code FLUENT. The effects of the nozzle contraction shape, water droplet size and the pneumatic pressure drop on the spray characteristics were investigated to obtain the optimal condition for coating applications.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.9
• /
• pp.895-900
• /
• 2012

This paper aims to examine the effect of nanodroplets on pool-type absorption heat transfer enhancement and to find the relationship between the dispersion stability and the absorption performance. The concentrations of oil and surfactant are considered as the key parameters. $C_{12}E_4$ and Tween20 are used as the surfactants and N-decane oil is added to the $NH_3/H_2O$ solution to make the binary nanoemulsion fluids. Binary nanoemulsion fluids are dispersed by the ultrasonic vibrator and the stirrer under specific conditions. The dispersion stability of binary nanoemulsion fluids for each oil concentrations is evaluated from the droplet size and Tyndall effect analysis. The absorption performance of binary nanoemulsion fluids is compared with the result of dispersion stability. In addition, it is found that the binary nanoemulsion fluid is a strong candidate as a new working fluid for absorption applications.