• 대한기계학회논문집
• /
• 제13권3호
• /
• pp.538-546
• /
• 1989

본 연구에서는 분사액체의 점도가 분무액적의 평균크기뿐만 아니라 표준편차 의 역수적 개념을 가지는 균일도에 주는 영향을 실험을 통하여 살펴보았다.

• 한국생활과학회지
• /
• 제7권2호
• /
• pp.63-73
• /
• 1998

To get well-fitted ready-made clothings with beautiful silhouettes, it's better to classify body forms into several forms and to assign sizing within each form than to grade just based on body size regardless of body styles. This study illucidated the importance of drop value in the results of surveying the current values of sizing and grading. Therefore, it's meaningful to get the classification of body form with appropriate distribution of drop values of the body, and the distribution of drop value and the frequency of each form is very helpful to name the combined sizing or coverage of ready-made clothes. This study aimed at classifying body forms with various drop values using multivariate analysis for sizing and grading. Factor analysis and cluster analysis were done using measured values from 346 unmarried women. The results are as follows: 1. The factor which explains body forms was obtained by factor analysis, and the representative major 18 items which have important roles in classifying body forms were selected among the measured values with high factor loading and communality. 2. The body forms were classified into 8 groups based on the charateristics, frequencies and distributions of them obtained from cluster analysis. 3. Each classified body form showed conspicuous difference in drop value and the difference of body form mainly resulted from the difference between waist and hip rather than the difference between bust circumference and waist in Korean unmarried women.

• 한국의류학회지
• /
• 제38권6호
• /
• pp.887-895
• /
• 2014

The study provides baseline data on developing ready-to-wear clothes for adult females in their twenties who have finished shaping their bodies and have realized an ideal shape. We analyzed the data from females aged from 20 to 29 in "The $5^{th}$ Size Korea Survey" and "The $6^{th}$ Size Korea Survey", and sorted body shapes into several types according to drop values before analyzing and comparing the characteristics among groups. We also referred to the change by year in the size of upper inner wear. To classify body shapes, three drop values were assigned for bust girth - waist girth, hip girth - waist girth, hip girth - bust girth; through cluster analysis all data were classified into three body types. Type 1 is more like normal body shapes with small drop values at the bust girth - waist girth and well-build lower body. Type 2 is X-shaped body shaped like a fiddle with big drop values at all parts. Type 3 is Y-shaped body with a big drop value at the bust girth - waist girth and well-build upper body. Type 2, X-shaped body, has the majority of distribution in every year, which proved to be the most idealistic body shape. There was a change in the brassiere cup size. Korean ladies in their twenties have larger breasts. The body shapes of Korean females in their twenties are increasingly like those of westerners. Bust girth is a very critical element to set measurements and design patterns for upper wear; consequently, a change in the size of breasts should be considered.

• 한국의류학회지
• /
• 제21권7호
• /
• pp.1247-1257
• /
• 1997

The purpose of this study was to classify size specifications of Korean adult male for the men's ready·made garments, especially jacket and dress shirts. Concept of the comfort and fitness has become a major concern in the basic function of the ready-made garments. Data were collected by the real anthropometric measurement and by the photographic sources. Sample size was 1.290 subjects as the sample and their age range was from 19 to 54 pean old by the stratified sampling method. 66 variables from the direct anthropometric data in total were applied to analyze. ANOVA in SAS package was applied to the data and the expected frequency distribution of 10.000 men was calculated by the extraction of density function. Control dimensions for jacket and dress shirts has been designated by Bcorean Apparel Sizing System (KS-K). Therefore this study was performed to classify size specifications by the control dimensions and at the same interval of KS-K. The drop values of 15, 12 and 9 has the high coverage rate of 22.1%, 21.0% and 18.8% respectively and are composed of the majority of 61.9% of the subjects. According to the drop values, size specifications and distribution of control and reference dimensions are predicted. About 65.75% of the expected frequency distribution without stature were covered by 19 size specification.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.486-491
• /
• 2008

The spray characteristics and drop size measurements have been experimentally studied in liquid jets injected into subsonic crossflow. With water as fuel injection velocity, injection angle and atomizer internal flows were varied to provide of jet operation conditions. The injector internal flow was classified as three modes such as a non-cavitation flow, cavitation, and hydraulic flip flows. Pulsed Shadowgraph Photography measurement was used to determine the spatial distribution of the spray droplet diameter in a subsonic crossflow of air. And this study also obtains the SMD(Sauter Mean Diameters) distribution by using PLLIF(Planar Liquid Laser Induced Fluorescence) technique. The objectives of this research are getting a droplet distribution and drop size measurement of each condition and compare with the other flows effect. As the result, This research have been showed the droplet size were spatially dependent on air-stream velocity, fuel injection velocity, injection angle effects and normalized distance from the injector exit length.(x/d, y/d)There are also different droplet size characteristics between cavitation, hydraulic flip and the non-cavitation flows.

• 한국추진공학회지
• /
• 제12권5호
• /
• pp.1-8
• /
• 2008

소형 액체로켓엔진 인젝터 분무의 공간분포 특성 규명을 위해 이중모드 위상도플러속도계(DPDA)를 이용한다. 분사압력 및 분무확산방향 이동거리를 변화시켜 분무액적의 크기, 속도 등을 측정하고, 산술평균직경(AMD), Sauter 평균직경(SMD), 수밀도, 스팬(span of drop size distribution), 그리고 체적 유속(volume flux) 등의 분무 매개변수를 도출하여 인젝터 분무의 분열특성을 고찰한다. 분사압력이 증가함에 따라 분무액적의 수밀도, 스팬, 그리고 체적 유속은 증가하지만, AMD는 감소하였다.

• 멤브레인
• /
• 제6권3호
• /
• pp.166-172
• /
• 1996

본 연구에서는 원하는 입자크기가 폴리부타디엔 라텍스를 제조하는 방법으로 공정조절이 쉽고 균일한 입자를 얻을 수 있는 막유화법을 이용하였으며, 유화제의 종류와 양, 첨가제의 양, 압력 등을 변수로 하여 실험을 행하였다. 제조된 라텍스의 입자크기와 분포를 분석하였으며, homogenizer를 이용한 직접유화법의 결과와 비교하였다. 또한 막투과 모델을 고찰하기 위하여 Harkins-Brown 식에 의해 이론적인 drop의 크기를 계산하였다. 실험결과 물대비 0.2 wt% 이상의 유화제 함량에서 안정한 라텍스를 얻을 수 있었고, 입자크기를 결정하는 가장 핵심적인 인자는 막표면의 기공 크기임을 알 수 있었다.

• 한국정밀공학회지
• /
• 제15권4호
• /
• pp.148-155
• /
• 1998

It is commonly known that, in GMAW, the characteristics of metal transfer and the size of molten drop are highly dependent on the welding current. These changes in the characteristics of metal transfer has a considerable effect on the weld quality, and a lot of studies have been made on metal transfer modes for that reason. In this study, two cases were investigated; the one in which the metal transfer proceeds with gravitational force, surface tension, and no electromagnetic force, and the other in which the process has electromagnetic term in addition, where the current density in the fluid has been assumed to have Gaussian distribution on any given cross-section and it acts vertically. Using fluid flow analysis, this study has observed the whole process of the development and break-up of the molten drop, and it also showed that transitional processes, drop rate, and the drop size in each metal transfer mode can be estimated.

• 한국분무공학회지
• /
• 제12권2호
• /
• pp.115-122
• /
• 2007

The spray characteristics and drop size measurements have been experimentally studied in liquid jets injected into subsonic crossflow. With water as fuel injection velocity, injection angle and atomize. internal flows were varied to provide of jet operation conditions. The injector internal flow was classified as three modes such as a non-cavitation flow, cavitation, and hydraulic flip flows. Pulsed Shadowgraph Photography measurement was used to determine the spatial distribution of the spray droplet diameter in a subsonic crossflow of air. And this study also obtains the SMD (Sauter Mean Diameters) distribution by using Planar Liquid Laser Induced Fluorescence technique. The objectives of this research are get a droplet distributions and drop size measurements of each condition and compare with the other flow effects. As the result, This research has been showned that droplet size were spatially dependent on air-stream velocity, fuel injection velocity, injection angle effects, and normalized distance from the injector exit length(x/d, y/d). There are also different droplet size characteristics between cavitation, hydraulic flip and the non-cavitation flows.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제27회 추계학술대회논문집
• /
• pp.59-63
• /
• 2006

횡단류 아음속유동장에서 연료의 수직 분사시 나타나는 액적영역의 액적들을 직접사진촬영으로 측정하고 PLLIF 실험을 통하여 얻은 강도 값으로 SMD분포를 측정하였다. 본 연구의 목적은 정상유동에서의 액적들의 크기 및 분포를 관찰하고, 캐비테이션 및 수력튀김 현상에 대한 액적들의 차이를 확인하는 것이다. 실험을 통하여 정상유동의 액적들은 분사차압, 공기의 유속, 침투거리, 인젝터 지름에 대한 하류방향 거리비(x/d)에 의하여 결정되며, 캐비테이션에 의한 난류강도, 유효지름에 따라 차이가 있음을 확인하였다.