• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제3B권4호
• /
• pp.173-178
• /
• 2003

The rotational force of ultrasonic motors is able to get from the frictional force of elliptical vibration by contact between rotor and stator. Generally, ultrasonic motors are suitable for driving at resonant frequencies of about 20∼80［KHz］. The driving characteristics of ring type ultrasonic motors are the object of this study. A two-phase driving signal is delivered to the tested ultrasonic motor, which has a $90^0$ phase difference respectively with both sine and cosine voltage waveforms. The driving frequency is almost equal to the mechanical resonant frequency for the proper operation, and the driving signal is supplied by the two-phase parallel resonant inverter. The validity of the proposed driving method is verified by experimental results with stable operation.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.709-712
• /
• 2000

In general three position sensors are needed to drive three phases SRM. Single position sensor driving method for three phases Switched Reluctance Motor(SRM) is proposed in this paper. By using single position sensor the cost of SRM is reduced. But position sensor the cost of SRM is reduced. But position detection at the staring is needed for single position sensor driving method. In this paper we propose the active align method to detect the relative position of rotor to three phases and align to the nearest phase. We proved the validity of the method by experiment and compare with other method.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 1998년도 학술발표회논문집
• /
• pp.92-98
• /
• 1998

In this paper various drive characteristics of a AC Servo Motor for EV(electric vehicle) and hybrid system proposed a countermeasure against air polution are presented. Since the transfer function of the plant is nonlinear and very complicated, there are difficultly in driving the system with real time. The performance of these experiments is confirmed by computer simulation results. The high performance and high accuracy of the driving system, Field oriented vector control system is proposed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.932-934
• /
• 2004

BLDC Motor is used in robots requiring a precisive motion recently. This paper presents the optimal design reducing the rotor inertia in order to improve the driving characteristic of BLDC motor driving robots, The optimal design was performed by using a parallel Genetic Algorithm which is superior at searching objective functions for the comflicated models having several optimal points. Therefore, objective function for optimization is rotor inertia and efficiency.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.711-713
• /
• 2000

Recently, the insulation breakdown accident happened at 6.6kV inverter driving motor brings out the reliability decrease to the motor driving system. We need to find the solution with system engineering level. The objectives of this study are developing the appropriate filter for the drive to protect the motor and the insulation system of motor which is driven by inverter. The circuit parameters of cable are calculated by EMTP(Electromagnetic Transient Program) to simulate the system. And we use MATLAB to find the appropriate filter parameter. The simulation and the test results are compared to verify the suitability of the filter parameter. We clarify the cause of the deterioration of the inverter driving motor through the analysis of insulation breakdown accidents. The endurance test scheme and the configuration method of insulation system are established.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 추계학술대회 논문집
• /
• pp.163-166
• /
• 2002

Recently, the insulation breakdown accident has been experienced at 6.6kV inverter driving motor. That brought about the reliability degradation of motor driving system.. We need to find the solution with system engineering level. The objectives of this study are developing the appropriate filter for the drive to protect the motor and the Insulation system of motor which Is driven by inverter. We clarify the cause of the deterioration of the inverter driving motor through the analysis of Insulation breakdown accidents.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부A
• /
• pp.168-170
• /
• 1998

In this paper a driving method using the microcomputer in safe driving the axial type double rotor brushless DC motor without shaft position sensor is studied. The rotor position is determined from the back-EMF passed though special filter. Starting technique which uses the motor as a synchronous motor at standstill are explained. The motor speed is controlled by changing the duty cycle of PWM. The test motor has Y-connected three-phase stator and 8-pole axial type double rotor. From the experiments, we got good performences of the proposed control system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 정기총회 및 추계학술대회 논문집 학회본부
• /
• pp.53-55
• /
• 1993

This paper describes the development of a software that has the man expert knowledge, experience and inference. This software is helpful for selecting the motors and driving systems which are best fit for the applications. Developed software can automatically select the most reasonable motor driving systems, only if a semi-skilled engineer inputs the performance criteria for the applications and mechanical data. Expert system inference engine and knowledge-base are implemented by C programming language. Data-base was implemented from manufacturer's catalogues for DC motors and brushless DC motors. Efficiencies of the various motor driving systems are compared reference on the average efficiency depends on the operating profiles. Developed expert system was tested in various of applications to verify the reliability, quick and easy selecting of the motor driving systems.

• 한국철도학회논문집
• /
• 제8권3호
• /
• pp.216-221
• /
• 2005

In electric motor coaches, the rolling stocks move by the adhesive effort between rail and driving wheel. Generally, the adhesive effort is defined by the function of both the wright of electric motor coach and the adhesive effort between rails and driving wheel. The characteristics of adhesive effort is strongly affected by the conditions between rails and driving wheel. When the adhesive effort decreases suddenly, the electric motor coach has slip phenomena. This paper proposes a re-adhesion control based on disturbance observer and sensor-less vector control. The numerical simulation and experimental results point out that the proposed re-adhesion control system has the desired driving wheel torque response for the tested bogie system of electric coach. Based on this estimated adhesive effort, the re-adhesion control is performed to obtain the maximum transfer of the tractive effort.

• 드라이브 ㆍ 컨트롤
• /
• 제9권4호
• /
• pp.62-69
• /
• 2012

Recently, hydraulic motor is getting the spotlight. It is resulted from rapid civil engineering public works by a lot of developing countries around the world. In this study, we divided the valves which are affixed in the hydraulic motor into some parts, implemented them through computer simulation, verified validation of each component, and analyzed behavior adding driving condition. Through the analyzed results with general driving condition, we found the reason why behavior became unstable as the motor had started spinning. Through the analyzed results with tough driving condition, we verified that the valve works well with it's production purpose.