• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.633-634
• /
• 2006

The current unbalance occurs in an induction motor with the supply of unbalanced voltage. Existence of an current unbalance occurs by various problems at the time of driving by in crease of the noise not to mention output decrease of a motor by increase of a loss. We confirmed how current unbalance occurred by a voltage unbalance because a slip came to change by the driving situation of a subordinate as for the induction motor. We confirmed that case to run to a low slip in a ratio of the same voltage unbalance rate brought a high current unbalance rate.

• 전기학회논문지
• /
• 제65권5호
• /
• pp.777-784
• /
• 2016

In this paper, the performance design and analysis for an Interior Permanent-Magnet Synchronous Motor (IPMSM) that will be used as a traction motor in the e-4WD system of hybrid SUV(Sports Utility Vehicle) and RV(Recreational Vehicle), are investigated using finite element method. In order to improve the accuracy of design, the tolerances of parts and assemblies as well as the material properties of permanent magnet, stator, rotor and winding etc. are considered under the conditions similar to real driving state of motor. Both no load performance test and maximum load performance test, in which real driving state and cooling condition have been considered, are also implemented via proto sample build to verify the validity of motor's performance design.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권10호
• /
• pp.637-645
• /
• 2000

This study was represented the improvement of the flexible position control for linear motion of hybrid type linear pulse motor(HLPM). The driving method used a minute 125 microstep drive instead of full step drive method. The digital control method was applied to the PI control for more stable position control, at this time the PI control parameters have gained by a Ziegler-Nichols turning method. The loop transfer function of control system was combined with both motor transfer function and digital PI control equation. Such, the proper for digital PI control system is verified to through the simulation and experimental result of the stability step response and bode plot with proper gain and phase margin.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 A
• /
• pp.121-123
• /
• 1999

The purpose of this paper is to establish a method of design of the Ultrasonic Motor for Driving Robot Hand. This method is based on two models for the ultrasonic motor(a two dimensional elastic contact model. electric equivalent circuit). And analyzed the basic model which installed in the module to match the suitable standard. As varied external diameter, internal diameter and thickness, the proper ultrasonic motor is implemented to find a targeted resonant-frequency and torque near to designed values.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1143-1145
• /
• 2000

In this paper, it presents the design and implementation of a Microstep control IC using Programmable Logic Device(PLD). A Microstep driver is implemented with a 5-phase hybrid stepping motor, which has a Pentagon winding, power MOSFETs, and some devices to improve the system characteristics. The Microstep driving method is used for high performance motion control, low vibration and low noise in motor control system. The improvement of the electrical and mechanical driving characteristic of a step motor is achieved by applying microstep driver.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.354-356
• /
• 2005

Novel structure ultrasonic motors which have cross type stator were designed and fabricated. Driving characteristics of the motors were analyzed and measured by changing the materials of the stator. This ultrasonic motor has stator with hollowed cross bar and the stator rotate the rotor using elliptical displacement of the inside tips. This motion is generated by lateral vibration mode of cross bars. This stator was analyzed by finite element analysis and the ultrasonic motors were made by analyzed results. The larger displacements were obtained, when the Young's modulus was increased and the Poisson's ratio was decreased. The fabricated one has high speed in large Poisson's ratio and Young's modulus. And the torque was increased in high Young's modulus.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 V
• /
• pp.2765-2768
• /
• 2003

The PI controller has many trial-and-error steps for gain design. This paper proposes a new design concept. In this method, a degree of stability and Kharitonov theory are applied and the controller gain is directly expressed by system parameters and current controller's bandwidth. Simulation results for permanent magnetic synchronous motor(PMSM) driving systems confirm the validity of proposed method.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.97-100
• /
• 1998

In this paper, micro step driving method is used for the high performance motion control and low vibration and low noise in an X-Y axis soldering machine for factory automation. The improvement of the electrical and mechanical driving characteristic of a stepping motor is achieved by applying microstep driver.

• 대한전기학회논문지
• /
• 제43권4호
• /
• pp.586-593
• /
• 1994

This paper suggests the algorithm for on-line efficiency control of permancent magnet synchronous motors driving the electric vehicles. The existance of unigue d-axis current is verified, which generates the maximum efficiency at operating points of motor. Using the Fibonacci search method, d-axis current converges to the minimization of inverter input power, and to prevent the variation of motor speed in process of the efficiency control, the voltage decoupled control strategy is introduced. Through the experiments, the effects of an efficiency control algorithm are verified.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 하계학술대회 논문집
• /
• pp.340-342
• /
• 2007

This paper presents the grip force control of myoelectric hand prosthesis according to myoelectric signal generated in the human muscle. The control system consist of a controller for driving DC motor, torque sensor for measuring out torque of motor, slip sensor for detecting slip of torque. The experimental results proved the reliability of proposed control system.