• Journal of Dental Rehabilitation and Applied Science
• /
• v.27 no.2
• /
• pp.223-231
• /
• 2011

The purpose of this case report is to introduce new attachment system(milled titanium bar with $Locator^{(R)}$ attachment) for implant supported overdenture in maxillary edentulous patients. A 56-years-old male patient visited the hospital due to the mobility of his maxillary fixed partial dentures(10-unit bridge). Including temporomandibular joint(TMJ), there was no specific PMHs to influence dental treatment. In radiographic and clinical evaluation, there was a severe bone resorption and mobility in maxillary teeth. Accordingly all the remaining maxillary teeth was extracted and fabrication of implant supported overdenture was planned. The milled titanium bar with $Locator^{(R)}$ was designed as an attachment system, considering the stability and retention of denture, masticatory efficiency, oral hygiene care, esthetics, pronunciation, and patient's financial state. The milled titanium bar was manufactured using CAD/CAM technology, and $Locator^{(R)}$ attachment connected to the bar by tap & drill method. For over 1-year, in terms of function and esthetics, satisfactory result was obtained.

• Journal of the Korea Society of Computer and Information
• /
• v.3 no.4
• /
• pp.164-173
• /
• 1998

The purpose of this study is direction of the Information Society situations and problems of voluntary activities. In the United States of 50 percent Population have experiences of voluntary Activities in 1995. But Korea peoples had been experience of voluntary service activities not so much. In order to solve these problems and improve the voluntary service activities situation today that is information society, the followings are proposed here so that the voluntary service can be performed effectively. Through the schools, mass media, and meetings of various groups, a program should be offered widely to educate about voluntary service activities. This study is based on the volunteers management at community society with Data base information communication. (1)Searching the necessity and problems of volunteers at community centers in Local government (2)Studying the support volunteers Activities management and demand of volunteers activities management through the Data base, (3) Participation of team services management from local Government. (4) Exploring the improvements based on the study. For effective management of volunteer activities management use Information communication System that have data base. And also training of volunteers have more computer using technique through education contained with lectures and drill.

• Journal of Korean Elementary Science Education
• /
• v.28 no.2
• /
• pp.178-186
• /
• 2009

The science writing is recognized for useful learning method to boost up scientific thinking for all class course as well as traditional lecture and experiment. Many researches say that science writing is helpful to extend students' science knowledge and scientific attitude. By the way, the researchers thought that science writing can also improve the science process skill if students participate in delicately organized learning program. In this study, we had contrived the teaching & learning strategy of science writing to improve science process skills. The learning program covers all field of Klopfer's process skills with various forms of writing; explaining writing, logical writing, critical writing, and creative writing. The learning program has been developed for 5th grade students in the regular classes in order to enhance science process skills as well as knowledge and scientific attitude. Not to miss any process skill or various kinds of writing, we used 3 dimensional frame. The axes of the frames are science process skills, forms of writing, and science curriculum contents. The students are given the final writing theme at the beginning of each chapter. They drill science process skills step by step during the classes, and have a chance to talk each other before the final writing. They practice writing skills from one sentence to full article by degrees. The effect of the program was examined by students' work and TSPS (Test of Science Process Skill). The result showed that 5th grade students had a meaningful progress in science process skills as well as knowledge and scientific attitude. we could confirm it with examining students' work in the class.

• Journal of Environmental Health Sciences
• /
• v.37 no.3
• /
• pp.226-233
• /
• 2011

Exactly 25 years after the Chernobyl nuclear disaster, 11th of March 2011 the Fukushima nuclear accident occurred in Japan and was ranked at level 7 same to the Chernobyl. A Korean and Japanese joint civil survey was conducted around Fukushima on April 13-17. The radiation survey data clearly shows a large hotspot area between 20 km and 50 km radius north and west direction from the accident reactors, with the highest radiation recorded being 55.64 ${\mu}Sv/hr$ in the air, 99.89 ${\mu}Sv/hr$ in the surface air, and 36.16 ${\mu}Sv/hr$ in a car, respectively. 3.65 ${\mu}Sv/hr$ in the air and 6.89 ${\mu}Sv/hr$ in the surface air were detected at the playground of an elementary school in Fukushima City. Spring came with full cherry blossoms in Fukushima, but it was silent spring of radiation contamination. Interviews with Fukushima nuclear refugees reveal serious problems about Japanese nuclear safety systems, such as there was no practical evacuation drill within 1-10 km and no plan at all for 10-30 km areas. Several reforms items for Korean nuclear safety system can be suggested: minimization of accident damage, clear separation of regulatory and safety bureaus with a new and independent administrating agency, community participation and agreement regarding the safety system and levels, which is the major concern of 80% Korean. To tackle threats of nuclear disaster in neighboring nations like China, a new position entitled 'Ambassador for nuclear safety diplomacy' is highly necessary. The nuclear safety of Korea should no longer be the monopoly of those nuclear engineers and limited technocrats criticized as a 'nuclear mafia'.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.7
• /
• pp.963-969
• /
• 2018

According to the dictionary definition Augmented Reality Technology is "an enhanced version of reality where live direct or indirect views of physical real-world environments are augmented with superimposed computer-generated images over a user's view of the real-world, thus enhancing one's current perception of reality". Since civilian property damages, noise and accidents during the field exercise by military or drills so that AR technology are indispensible with small units drills in Army. However because AR technology which Army has adopted are usually use for special units or need separate spaces which costs lots of budgets, those are not fit for small unit drills or tactics in regular Army. In this regards this paper suggests the AR technology which can apply small unit drill field and the efficiency and legal concerns thereof as well.

• Clinics in Shoulder and Elbow
• /
• v.20 no.3
• /
• pp.153-161
• /
• 2017

Background: This study was conducted to compare the clinical and radiological outcomes of the locking hook plate fixation (HP) technique and the single tight rope (TR) technique applied for acute high-grade acromioclavicular (AC) joint separations. Methods: Between 2009 and 2014, 135 consecutive patients with acute AC joint separation Rockwood types III, IV, and V were subjected to surgical reconstruction. One hundred fourteen patients (84.4%) were available for retrospective evaluation. Of them, 62 and 52 were treated using the single TR group and clavicular HP group techniques, respectively. The visual analogue scale, Constant, American Shoulder and Elbow Surgeons (ASES), and Taft scores were used for clinical assessment. Postoperative shoulder range of motion was also assessed. An anteroposterior radiograph of the coracoclavicular distance (CCD) was obtained to evaluate the radiographic signs of recurrence. Results: The TR group patients had better Constant, ASES, and Taft scores than the HP group patients. The loss of reduction in terms of the CCD did not differ between groups. Subacromial osteolysis was observed in 34.6% of the cases in the HP group. However, there were no significant differences in the clinical outcomes between the patients with and without osteolysis in the HP group. Subcoracoid osteolysis, drill tunnel widening, and metal displacement were observed in 3.2%, 22.6%, and 4.8% of the cases in the TR group, respectively. Conclusions: The single TR technique was relatively more effective at treating acute high-grade AC joint injuries than the HP fixation technique (level of evidence: therapeutic; retrospective comparative study, Level III).

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.26 no.4
• /
• pp.293-297
• /
• 1981

An attempt has been made to determine the optimum size of sampling unit and the number of samples for a given precision in wheat, using the data collected from the various experiments in 1979/80. It was found that the coefficients of variation for number of spikes except the case of high-ridge broadcasting by 8HP rotarized seeder are in the same order of those for yield of wheat, and the regression coefficients associated with the coefficients of variation and the size of sampling unit were significant at 1% level of type I error. A wide range of variation in the size of sampling unit was observed for different methods of seeding, indicating the proper sizes of sampling units for 40cm \times 18cm, 60cm \times 18cm, 20cm \times 5cm, 120cm \times 90cm to be 0.40$m^2$, 0.17$m^2$, , 0.11$m^2$, , 0.55$m^2$, , respectively. The variance component for the experimental error was not physically possible to estimate due probably to high variability among the sampling units. The number of the sampling units per plot for a given precision of CV=12% was estimated to be one in an experiment with 4 replicates.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.1 s.160
• /
• pp.1-10
• /
• 2007

This research was designed to compare the subjective evaluation of Hand between on- and off-line by structure and sensible characteristics of fabric. 113 subjects who have a fashion design major evaluated the subjective evaluation of Hand of various 16 kinds of specimens on- and off-line. T-test and pearson correlation coefficient were used for statistical analysis by SPSS WIN 11.0. The results of this study were as follows: The results of correlation analysis of the evaluation score indicated that Crash and Satin show high correlation between two kinds of evaluation score. But, fabrics which have distinct characteristics such as Plush, Dobby, Seersucker represented low correlation coefficient. The results of t-test fer the difference of the evaluation score showed that thin fabrics like Organdy represent a large difference between on- and off-line evaluation. On the other hand, twill weaved fabrics like Drill, Tweed, Saxony did not show many differences. Analysing each item in terms of correlation of evaluation of hand between on- and off-line gave results that the shininess was most deliverable through on-line and density and the dryness was not so deliverable through on-line. Comparison of evaluation score between on- and off-line items showed that the estimation to real fabric is more negative than that of on-line. The results of most preferable hand between on-and off-line showed exact opposite preference between shinny, smooth and soft Satin and rough, woolen Tweed. Organdy showed the most different subjective evaluation of hand in real ones compared with that of on-line.

• Journal of Biosystems Engineering
• /
• v.30 no.5 s.112
• /
• pp.261-267
• /
• 2005

In order to save labor and cost, direct seeding has been considered as an important alternative to the machine transplanting in rice cultivation. As current seeders for direct seeding of rice seeds drill irregular amount of seeds under various operating conditions, conventional drilling should be turned to precision planting which enables accurate placement of proper amount of rice seeds at equal intervals within rows. In this study, design, construction and performance evaluation of a precision seed metering device for planting of rice seeds were carried out. As prototype, the conventional roller type seed metering device was modified for planting: increasing diameter of metering roller, setting 2 or 4 seed cells on metering roller, adding seed discharging lid and its driving cam mechanism. Through performance tests for prototype and the current seed metering device, number of seeds in a hill, planting space and its error ratio, coefficient of variation of planting space (planting accuracy), and seeding length of $90\%$ of seeds in a hill divided by planting space (planting precision) at setting planting spaces of 15, and 20cm, seeding heights of 10, and 20cm, and seeding speeds of 0.1, 0.2, and 0.5m/s were investigated. Prototype showed better seed planting performance than the current seed metering devices. When setting planting space of 15 cm and seeding height of 10cm, prototype with 2 seed cells showed that variations of planting space and seeding lengths of $90\%$ of seeds in a hill at up to seeding speed of 0.5m/s were within 0.9cm, and 3.6cm, respectively.

• Journal of Biosystems Engineering
• /
• v.27 no.1
• /
• pp.25-32
• /
• 2002

This study was conducted to develop a dry paddy seeder of strip tillage. The prototype is 8 rows drill seeder, which is composed of a strip tillage, sowing and fertilizing device, and pressing wheels to do the strip tillage, sowing, fertilizing, and draining ditch, simultaneously. The performances of prototype was evaluated through the investigation of fuel consumption, tillage torque, ratio of soil breaking, and economical efficiency and the results were compared with these of a dry paddy seeder that needs whole tillage. According to the USDA textural classification, the experiment field was composed of sandy loam which consisted of 56.8 of sand, 30.2 of silt and 13.0 % of clay, respectively. Its hardness ranged from 952 to 1,673 kPa depending on the soil depth, and its soil moisture content was 24.9%(d. b.) Fuel consumption of the prototype was 5,015g/hr at 2,000 rpm of engine, which was consequently 64% smaller than that of the conventional dry paddy seeder. For the tillage torque, it ranged from 132 to 206N$.$m depending on the tillage pitch, which was 10∼30% smaller than that of the conventional dry paddy seeder. The ratio of soil braking of the prototype was 87∼98%, whereas that of the conventional dry paddy seeder was 80∼97%. The working performance of the prototype was surveyed to be 3.8hours/ha, which was about 5 times higher than that of the conventional dry paddy seeder. The cost reduction of 26.3% was obtained by using the prototype.